Denver TFD-2201 Instruction Manual

22″ TFT LCD TV & DVD COMBO

TFD-2201

Instruction Manual

Dear Customers

Thanks for purchasing this TFT-LCD TV/Monitor. We strongly recommend that you carefully read the safety and operation instructions before operating your TV/Monitor. FOLLOW INSTRUCTIONS AND HEED ALL

WARNINGS on your TFT-LCD TV/Monitor and in this manual.

Safety information

__________________________________________________ Note:

Before connecting the AC power cord to the DC adapter outlet, make sure that the voltage designation of the DC adapter corresponds to the local electrical supply. If you are unsure about your power supply, please ask

the local power company.

Caution:

To avoid electric shock, never touch the inside of the LCD TV/Monitor. Only qualified technicians should open the case of the LCD TV/Monitor.

Warning:

Do not defeat the safety purpose of grounding-type. A grounding type plug has two blades and a third grounding pin. The third pin is provided for your safety. If the plug does not fit, ask the electrician to replace the obsolete outlet. Do not modify the plug!

To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

Precautions

________________________________________________________

Please read the below precautions carefully before operating the unit.

Power cord protection:

1. Never use your LCD TV/Monitor if the power cord has been damaged. Do not put anything on the power cord, and keep the power cord away from where people can easily trip over it.

2. Be sure to hold the plug , do not pull the cord when disconnecting the LCD TV/Monitor from an electric socket.

3. Locate your LCD TV/Monitor near an easy accessible AC outlet.

4. The power cable/disconnect device shall remain easy to operate/disconnect.

Placement:

1. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

2. An appliance and a cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

3. Never placing the LCD TV/Monitor in areas under direct sun-light, with high temperature or with high humidity or high level of dust which may cause damages on the internal parts of the LCD TV/Monitor.

4. Place the LCD TV/Monitor on a solid surface and treat it carefully. The screen is made of thin glass with a plastic front surface and can be damaged by dropping, hitting or scratching.

Non-use periods:

Unplug the LCD TV/Monitor when it will no be used for a long period.

Foreign objects:

Never insert anything metallic into the cabinet openings of the TV/Monitor. Doing so may cause the danger of electric shock.

Keep away from water/magnetic fields:

1. Do not expose the LCD TV/Monitor to rain or use it near water source. If the LCD TV/Monitor got wet, unplug it and contact an authorized dealer immediately.

2. Do not clean the front panel with Ketone-type materials, ethyl alcohol, toluene, acid, methyl, or chloride since they may cause damage on panel.

3. Keep the unit away from flower vases, tubs, sinks etc. if liquids spill into the unit, serious damage will occur.

4. Do not place magnetic objects close to the LCD TV/Monitor.

Stacking:

Opening in the LCD TV/monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Never use the unit on a bed, sofa, rug, or other uneven surfaces. Doing so may block the ventilation openings in the bottom of the unit. If you place the LCD TV/Monitor in a bookcase or some other enclosed place, please make sure to provide adequate space for ventilation.

Servicing:

1. If the LCD TV/Monitor does not operate normally – In particular, if there are any unusual sounds or smells coming from the unit – just unplug it immediately and contact an authorized dealer or service center.

2. Unplug the LCD TV/Monitor from the AC outlet before any service.

3. Make sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts any cause fire, electrical shock, or other hazard.

4. Following any service or repair, be sure the service technician performs safety checks to certify that the TFT LCD TV/Monitor is in safe operating order.

Unpacking

____________________________________________

Please make sure that the following items are included with your LCD TV/Monitor. If any item is missing, please contact your dealer.

TFT LCD TV/ Monitor

Remote control

DC adapter

RCA cable

Operation manual

Power cord

I. View of the TV/Monitor

Front view

Back view

3 4 5 6 7 8

9 10 11

1. Remote sensor

2. Power button & indication light

3. DVD play/pause button

4. DVD stop playing button

5. DVD open/close button

6. P+/Up direction button

7. P-/Down direction button

8. VOL+/Right direction button

9. VOL-/Left direction button

10. Menu button

11. TV /AV function switch button

1718 19 20

16151413

12. DVD disc slot in

13. DC input jack/Car cord input jack

14. SCART jack

15. PC audio in jack

16. VGA jack

17. Audio in (Right) jack

18. Audio in (Left) jack

19. Video jack

20. S-video jack

21. TVRF antenna jack

II. Remote control reference guide

(1) Remote control function

1. DVD open/close

2. Video out mode button

3. SLEEP button

4. 0-9 Numerical button

5. Program play button

6. Volume down button

7. Unit system menu button

8. Display status message button

9. DVD stop button

10. DVD ENTER/PLAY button

11. DVD fast rewind button

12. DVD fast forward button

13. DVD MENU display button

14. Direction button (Up)

15. Direction button (Left)

16. DVD system setup button

17. ANGLE button

18. Direction button (Down)

19. RANDOM play button

20. SUBTITLE function button

21. TELETEXT buttons

22. Key lock button

23. ZOOM function button

24. Search disc play mode

25. TITLE/PBC button

26. SLOW PLAY button

27. Direction button (Right)

28. REPEAT A-B button

29. REPEAT button

30. DVD skip backward

31. DVD skip forward

32. DVD PAUSE/STEP button

33. CH- button

34. Audio effect button

35. Volume up button

36. CH+ button

37. DVD function button

38. -/- - button

39. TV/AV function switch button

40. RECALL button

41. MUTE button

42. STANDBY button

● TELETEXT BUTTONS

(If TV has teletext function. You may enjoy it by using these buttons)

Name Function Name Function

Enter into TXT list mode Keep the page display

To select TXT/TV mode

To show the sub page

Screen zooming

RED Display red screen GREEN Display green screen YELLOW Display yellow screen BLUE Display blue screen

Display the hidden information

INDEX Menu display

Page display or cancel

(2) Remote control battery installation and cautions

Replace battery by following the below steps: Requires one pair of AAA batteries.

1. Open the battery cover as shown below:

2. Install the battery into the battery tray.

3. Close the battery cover

Caution:

1. Keep the battery out of children’s reach.

2. Don’t attempt to recharge, short-circuit, disassemble, heat or throw the

batteries into the fire.

3. Always replace both batteries at the same time. Never mix new and old batteries or batteries of a different type.

4. If you don’t intend to use the remote controller for an extended period, remove the batteries to prevent possible leakage and corrosion.

Notes:

1. Do not drop, apply shock or step on the remote control.

2. Do not spill water on the remote control.

3. Do not use the remote control for other equipments at the same time

4. If the TV does not operate even when operating the remote control from a close range, you need to replace the batteries. Refer to the label on the back of the remote control for directions for replacing batteries.

III. Installation and connection

Connect the LCD TV/monitor

1. Connect the TVRF source with the antenna port. TVRF signal

including: Receiving antenna /satellite TV/CATV net. You can use 75

DVD or VCR

Ω coaxial cable to connect the outdoor antenna.

Outdoor Antenna Connection:

Use 75Ωcoaxial cable plug or 300-75Ωimpedance converter to plug

Antenna in jack

in antenna input terminal on the rear of the cabinet.

VHF antenna

UHF antenna

Mixer

75ΩCo-axis cable

Input terminal of

antenna

Co-axis antenna plug

2. Connect the audio sources (Including DVD, VCDR, CAMCORDER

and PC) to the proper AUDIO input jacks ‘L’ and ‘R’.

3. Connect the video source to the VIDEO jack by RCA cable.

4. If the video source has a SCART output jack, you can connect the

signal to the monitor by the SCART cable.

5. Connect the video source to the S-VIDEO input jack of the monitor by

the S-video cable (Pretended the video source has S-video output jack).

6. Insert the AC power to the DC adapter, then connect 12V input jack of

the monitor to it’s DC output jack.

7. When use as computer screen, connect the PC to the VGA jack of the

monitor by the relevant cable.

IV. TV/Monitor screen operation

(1) Basic operation

1. Press the POWER button on the unit or the STANDBY button on the remote control to switch on the power, the indication light will be in blue

+ 23 hidden pages