Denver Prosonic DFT-2615 Instruction Manual

User’s Manual

LCD Color TV

DFT-2615

To enjoy your set to the full from the very

beginning, read this manual carefully and keep it

handy for future reference.

Thank you very much for your purchase of our LCD TV products. To enjoy your set to the full from the very beginning,

read this manual carefully and keep it handy for future reference.

Contents

Safety Instructions......................................................... 3

To place ..............................................................3

Power cord protection ..........................................3

! Precaution...................................................... 3

Maintenance.................................................................. 4

Maintenance......................................................... 4

Other items........................................................... 4

Installation ..................................................................... 5

To connect the antenna........................................ 5

To connect the power ........................................ .5

Remote control's batteries installation.................. 5

Control Panel ................................................................6

Remote Control ............................................................. 7

Basic Operation............................................................. 8

Power On/Off .......................................................8

To receive TV program......................................... 8

To adjust volume .................................................. 8

Mute ..................................................................... 8

Return ..................................................................8

Receiving the TV program by using numeric keys8

Using Menus ................................................................. 9

PICTURE .............................................................9

How to enter “PICTURE”............................. 9

How to use “PICTURE” ............................... 9

SOUND .............................................................. 10

How to enter “SOUND”.............................. 10

How to use “SOUND” ................................ 10

SET UP .............................................................. 11

How to enter “SET UP”.............................. 11

How to use “SET UP” ·······························11

TIMER................................................................ 13

How to enter “TIMER” ............................... 13

How to use “TIMER”............................... 13

FUNCTION ........................................................ 14

How to enter “FUNCTION”.......................... 14

How to use “FUNCTION” ......................... 14

How to use “Position” in YPbPr mode................ 15

How to use “Position” in VGA mode .................. 15

How to use “HDMI Position” in HDMI mode....... 15

Teletext Operation ...................................................... 16

Connection of External Equipment.............................. 17

Socket Location ................................................. 17

To Connect Speaker .......................................... 17

Basic Connection ............................................... 18

Trouble Shooting ........................................................ 19

Specification and Accessory ....................................... 20

- 2 -

Safety Instructions

To place

Place the TV on a horizontal, stable surface, do not block the ventilation holes, avoid placing the TV in direct sunshine,

or in high temperature, damp, dusty or causticity environment, otherwise the internal components will be damaged.

When you install the base-stand, be sure to install it according to the installation instruction strictly. The wall should

have enough loading strength to avoid falling and injury. In order to install safe and convenient, please connect the power,

antenna, VGA terminal first, then fix the TV set on the installed base-stand.

Power cord protection

Connect the AC power correctly, and ensure to ground perfectly, be careful not to damage the power cord, not place

it under a heavy object, not let it be spliced, worn out or knotted, not pull the power cord only when removing the power

plug.

! Precaution

* If and when anything abnormal occurs, turn off the power immediately, unplug the power

cord from the outlet and call the shop for repairing. Do not remove the back cover by

yourselves to avoid electrical shock. Let qualified technicians check and adjust your TV. * When away for a long time, unplug the power plug. * Do not plug or pull the power plug using wet hand. * When you plug or pull the power plug, hold the isolation part of the plug, do not pull the

power cord. * Do not drop or splash water on the TV set, do not put the container that is full of liquid on

the TV set in order to avoid electrical shock and so on. * Do not put any objects or container that is full of liquid on the TV set, otherwise the

eyewinker or the liquid may leak into the TV set through the ventilation hole to cause

electrical leakage. * Do not cover the cloth cover on the TV set in order to avoid the temperature rising too high

to cause damage. * Do not press or touch the panel. * Do not touch the antenna cable in lightening weather. * Do not touch the terminal on the back cover when the TV is working. * Do not connect the unsafe accessories to the TV set. * Set up the antenna away from highways, power lines and neon signs.

- 3 -

Maintenance

* First, please confirm that the power is turned off and the plug is pulled out.

* Do not use benzene, petrol or oil thinner, etc. to clean the TV.

* Clean the cabinet with a soft and dry cloth. If the cabinet is very dirty, use a soft and wet cloth, then dry it.

* Clean the LCD panel with soft and dry paper or cloth. Do not press it.

* Please be careful because the cabinet and the panel are easy to be scratched.

Other items

* Please confirm that the power is turned off completely when it is loaded and transported; do not

touch, especially do not press the panel when it is loaded and transported. * Do not turn on and turn off the set continuously, otherwise it will affect the set’s life span. * Be careful for condensation at sudden temperature change. Condensation makes damage to panel

or electrical contacted parts, at this time, wait for a while (still be electrified), the condensation will

fade. * When fixed patterns are displayed for a long time, remnant image is likely to occur. We will not repair

the TV set caused by this reason free from charge. * The antenna should be checked and replaced periodically.

- 4 -

Installation

Confirm that the power switch is OFF before you plug the Signal Cables and Power Cords.

To connect the antenna

Connect the antenna or the CATV signal cable directly to the antenna input terminal

located on the back cover, otherwise it will cause inferior image.

Note: 1.Please use 75 ohm coaxial cable.

2.Do not enlace the signal cable and the power cord.

To connect the power

Insert one end of the power cord to the power input terminal located on the

back cover and the other end of the power cord to the power outlet grounding

perfectly.

◆ The power adopted by this set: AC 220V-240V 50Hz

◆ When away for a long time, turn off the power, then unplug the power

plug.

◆ Do not connect the set to DC power.

Part of the TV set’s back cover

ANT

Signal cable plug

Off

Power

Power plug

Remote control’s batteries installation

This remote control uses 2 x AAA batteries. Remove the back cover as shown, put the

batteries in with the correct (+ and - ).

The batteries should last for approximately 1 year. If the control idles, remove batteries, as

they may leak.

Replace with new batteries:

◆ Do not use rechargeable Ni-Cd battery.

◆ If it is out of battery, change the two batteries at the same time.

◆ Do not use different model (different material) battery.

◆ Do not recharge the battery.

Part of the Remote Control’s back cover

- 5 -

Control Panel

r r

Button on the Control Panel

V+

V -

P+

P -

TV/A

Power indicato

Infrared senso

Function Key on the Remote Control

ON/STANDBY POWER

Panel on the side

TV/AV

MENU Activate menu window MENU

P- / P+ TV channel selection CH- / CH+

V - / V+ Volume adjustment VOL- / VOL+

TV/AV AV/TV

EXIT EXIT

Instruction of buttons on control panel:

Press this button, the TV switches between “ON” and “STANDBY”;

TV/AV Press this button, the signal switches among TV, SCART-1, SCART-2, AV, S-Video, YPbPr,

VGA, and HDMI; To exit the main menu

MENU Display the menu; Exit the menu

P- /P+ TV channel selection; Enter the selected menu; Menu item selection V- / V+ Volume adjustment; Menu selection; Adjust the value of menu item

- 6 -

Remote Control

1.POWER Switch between “power on” and “standby”

2.0-9 Numeric keys

3.-/-- To select the channel which the channel

number is more than 9

4.MUTE Mute on/off

5. To return to the last program

6.VOL-/VOL+ Decrease /Increase the volume

7.CH+/CH- Increase / Decrease the channel number

8.ENTER To enter into menu or menu item

9. ▲ / ▼ To select menu item

10. ◄ / ► To adjust menu item

11.MENU Activate or exit Menu window

12.EXIT To exit the main menu

13.AV/TV To change signal source: TV, SCART-1, SCART-2,

AV, S-Video, YPbPr, VGA and HDMI

14.NICAM/A2 When the TV is broadcasting the program with

Nicam, press this key to select sound channel.

15.SYSTEM Switch among D/K，L, B/G, I (display at the top

of right corner)

16.DISPLAY Current program status (display at the top of

right corner)

17.SMODE Sound effect selection. User, Standard, Cinema,

Music, and News respectively.

18.SLEEP The TV turns to standby status at the setted

sleep time. Press this key repeatedly; you can

select the sleep time. “Off” indicates the sleep

function is off.

19.PMODE Picture effect selection. Select Dynamic,

Standard, Mild, User respectively.

20. TELETEXT keys, for detail, see “TELETEXT

Operation”.

12 19

5 15

10 11 17

DFT-2615

- 7 -

+ 15 hidden pages

Denver Prosonic DFT-2615 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual