Denver MMP-390 User Manual

MMP-390

CD MP3 MICROSYSTEM

USER MANUAL

Please read and keep these instructions

2

Important safety instructions – please read carefully

and keep for future reference

To reduce the risk of fire or electric shock, do not expose this product to water, rain or
moisture. To prevent the risk of electric shock, do not remove the cover or back of this
product. In case of product failure, only qualified personnel can repair. There are no
user-serviceable parts inside.
Use of controls, adjustments or performance of procedures other than those specified
herein may result in dangerous radiation exposure. This product is rated as LASER
CLASS 1 PRODUCT.
CAUTION: Laser radiation when open - never stare into the laser beam.

CAUTION !
Dangerous tension inside the product ! Do not open. Risk of electric shock ! No parts can be
repaired by the end-user. Only qualified personnel can repair and maintain this product.

If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-sales
personnel in order to avoid any danger.

The product must be installed in accordance with local laws.

Damaged batteries must be properly disposed. In order to protect the environment, please dispose the
batteries properly, in accordance with local laws (information is available at your reseller).

Where to install the product

- Place the product on a straight, rigid and stable place. Do not place the product on a carpet.

- Do not place the product on top of another that may cause overheating (for example, a receiver
or amplifier).

- Do not place anything underneath the product (for example, CDs or magazines).

Proper ventilation

- Do not install this equipment in a confined or building-in space such as a book case or similar
unit, and remain a well ventilation conditions. The ventilation should not be impeded by
covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
Place the product in a sufficiently–aerated place to avoid overheating. Allow at least 10cm
spacing at the back and top of the product, and 5cm spacing on both sides to prevent
overheating.

- Do not place items such as newspapers, tablecloth, curtains, in front of the ventilating
openings.

Do not expose the product to high temperatures, moisture, water and dust.

- The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such
as vases, shall be placed on the apparatus.

- Do not place other items close to this product that may damage it (for example, objects
containing water or lightened candles).

3

- No naked flame sources, such as lighted candles, should be placed on the apparatus.

- The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Electric supply

- Please unplug the product in case of prolonged non-use.

- If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales
personnel to avoid any danger.

- This product must be connected to an electrical supply 230V ~ 50/60Hz.

- The plug must be accessible after installation.

- The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.

This product is compliant with directives 2006/95/CE (abrogating the directive
73/23/CEE modified by the directive 93/68/CEE) and 2004/108/CE (abrogating
the directive 89/336CEE).

- This logo set on the product means that the recycling of this apparatus comes within the framework
of the directive 2002/96/EC of January 27, 2003 concerning the waste on electrical and electronic
equipment (WEEE).

- The presence of dangerous substances in the electrical and electronic equipments can have
potential consequences on the environment and human health in the cycle of reprocessing this
product.

- Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled waste.

- As the end user, your role is of prime importance in the cycles of re-using, recycling, and other forms
of valorization of this electrical and electronic equipment. Local authorities and resellers have set
special procedures for the purpose of collecting and recycling this product.

- You have the obligation to use the selective waste collection systems put in place by your local
authorities.

4

INTRODUCTION

Thank you for choosing this product. Here are the main characteristics of your new microsystem:

- Equipped with a digital PLL tuner, you can easily search and memorize FM radios during playing.

- With its compact with elegant design, this system can easily find its place at home and be installed in

just a couple of minutes.

- Thanks to its USB input, it becomes a real multimedia player, able to play all your favorite songs in MP3
and WMA format,

- Finally, you can enjoy an uncompromised music experience with convenient and easy-to-use audio
settings thanks to the EQ.

FUNCTION
COMPATIBLE WITH AUDIO CD/CD-R(W)MP3/CD-R(W)WMA

LCD DISPLAY
MATCHED TWO SPEAKERS WITH OUTPUT POWER : 2 X 8W
DIGITAL PLL FM TUNER
USB FUNCTION

LIST OF MAIN PARTS
Master Unit
2 Speakers
Remote Control
Manual