Denver BTS-63 operation manual

DENVER BTS-63 - Bluetooth Speaker

INSTRUCTION MANUAL

WWW.DENVER-ELECTRONICS.COM

Please read this instruction manual carefully before start using the product.

Power:

 Works on internal rechargeable lithium battery. Please charge your speaker fully before first use. To charge

the battery:
Using a micro USB cable (included), insert the jack into the ”Charging” hole and then plug the USB connecter
into the USB port on a computer for charging.

 A red light will indicate the charging situation. When battery is full, the red light will turn off automatically.

Bluetooth Speaker Operation:

 Turn on the unit by pushing the switch to ON position. A blue light aside will start blinking to indicate the

speaker is in paring mode and searching for your Bluetooth mobile device.

 Open the Bluetooth function on your device and search the speaker named “BTS-63”. After selecting this

speaker, your device will pair without a password. (If required, enter the password “0000” to finalize the
paring).The blue light will begin to flashing slowly after pair is complete.

 Start playing music on your device. Keep your device within 33 feet (10 meter) of your speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit when not in used.

Universal Speaker Operation

 For other music devices without Bluetooth, use Auxiliary input cable. Connect the included Auxiliary cable

into the speaker’s Auxiliary port and plug the other end into your device aux-in.

 The device will switch to auxiliary mode automatically.
 All controls and functions are operated through your mobile device.
 Disconnect the Auxiliary cable when not in used.

Caution:

 This is not a toy. Please keep away from small children.
 Please keep away from water / heat.
 Low power may cause poor connection even no working of Bluetooth.
 Do not over-charge the battery.
 Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.