Denver BAS-24100M Service Manual

Senior Phone

BAS-24100 www.facebook.com/denverelectronics

User Guide

English

ENG-1

Insert the SIM card: The SIM card contains your phone number, PIN code, links to operator services, contacts and SMS messages. To access the compartment containing the SIM slot, turn off the phone and lift up the cover starting from the slit on the bottom right corner. Remove the battery. Insert the SIM card into the slot with the gold contacts facing down.

TF card Slot

SIM Slot

Inserting a memory card: in order to use camera and media player functions, a micro-SD memory card is required (not

ENG-2

included in the package): the card must be placed into the rear of the phone to the left of the SIM slot. Insert the micro-SD card as shown, with the gold contacts facing downwards: open the metal shutter by pushing it towards "open" and lock it again after inserting the card by pushing it in the opposite direction ("close").

Turn ON, Turn OFF and keypad lock: to turn on and turn off the phone, press and hold the red end call key. The keypad locks by closing the flip.

Connecting to a PC: use the USB cable to connect BAS-24100 to a computer. Select USB Storage on your phone. You can save songs to play with the music player in "My Music" folder, on SD card.

Inserting the Battery: your device is provided with a lithium-ion battery and is designed to be used exclusively with original batteries and chargers. The battery must be inserted into the rear of the phone. Insert the battery into the battery

ENG-3

compartment with the contacts facing up corresponding to those of the phone. When done, put the rear cover back into position as shown in the following illustrations.

Charging the battery: charge the battery before starting to use the device. Connect the charger to a mains wall socket, and then plug the jack into the charging base (wait for a moment until an audio feedback notifies the charging start) or put it directly into the micro USB port on the right side of

ENG-4

the phone. When charging has been completed/is complete, a second audio feedback will be heard

Attention: To preserve the functionality of the product and the integrity of the warranty, we recommend the use of original chargers. Please charge the battery indoors, in a dry and favorable environment. It’s normal for the battery to get slightly warm during the charging process. The battery will reach its full capacity only after several complete charging cycles.

ENG-5

Receiver

LCD screen

Flash

Select and
confirm Key	End call and
	Power on/off
Call key	key

Torch Key Radio switch

SOS button

Vibration key

Speaker

Microphone

ENG-6