Denver ACT-8030W Quick Start Guide

ACT-8030W Quick Start Guide

ENG 1

IInnttrroodduuccttiioonn ttoo aappppeeaarraannccee aanndd kkeeyyss

Display/Menu key

2.0’’ HD LCD

Lens

Infrared remote
control lamp

Charging /Busy indicator

Busy indicator

Microphone

ENG 2

Wifi/Down key

HDMI port

Power/Mode key

Battery door

Micro SD Card

Shutter/OK key

Micro USB port

Speaker

ACT-8030W Quick Start Guide

ACT-8030W Quick Start Guide

ENG 3

SSttaarrtt uussiinngg ______________

USB cable

1. Charge the built-in lithium battery

Connect the camera to the computer for charging, at this time, the charging indicator will be in red, and it

will be off after charging. Generally, it takes 2-4 hours to charge the battery.

2. Use the storage card

1. Push the Micro SD card into the slot till it is in place as per the instruction in concavely engraved words by

ENG 4

the storage card slot.

2. To take out the Micro SD card, press the tail of the storage card inwardly softly and it will be popped out.

Note: There’s no built-in memory unit in the camera, so make sure to insert a storage card into it prior
to use (it is recommended that a Micro SD card of better quality be used).

3. Power on/off

3.1 Power on: Press Power key for 3 seconds, the screen will be on and the camera will be started.

ACT-8030W Quick Start Guide

ENG 5

3.2. Power off: Hold on Power key for 3 seconds when the camera is in the idle state to turn it off.

3.3. Auto screen off: The screen will be turned off automatically when the time that the camera is in the
idle state for automatic screen off to save power. After that, the lamp for screen off will be on.

3.4. Power off when the camera is lack of electricity. When electrical quantity of the battery is very low, an

icon of will be displayed on the LCD screen, prompting you to charge it in time. When the icon
turns red and flickers, the camera will be turned off automatically.

4. Shift among functional modes

The camera has 3 modes, namely video recording mode, shooting mode and replay mode. After power is on,
press Power key to shift among them.

Video recording mode Shooting mode

5. Indicator

Busy indicator (red): When the camera is busy such as recording videos, shooting photos and turning off

screen automatically, the work indicator will flicker.

Charging indicator (blue): When it is on, the user is prompted that the camera is being charged and it will
be off after charging is completed.

ACT-8030W Quick Start Guide

ENG 6

6. Video recording mode

After power is on, the video camera will enter video recording mode directly and in preview mode, press
Shutter key to start video recording; Press it again to stop shooting. If the memory card is full or electrical
quantity is low, it will also stop shooting:

Taking a photo while recording: press the Power button during recording to take a photo. When a photo is

taken, the texts “CAPTURE DONE” will display on the screen.

1. Icon of mode, indicating video recording mode;

2. Indicate quality of video;

3. Indicate size of video, and FHD 1080P (60FPS)

/ FHD 1080P (30FPS) / HD 720P (120FPS)

/ HD 720P (60FPS) / HD 720P (30FPS) is optional;

4. Recording time, indicating recordable length of time;

5. Icon of battery, indicating current electrical quantity;

( With maximum 29 minutes video recording and then stop.Must be
started manually on the camera again.)

7. Shooting mode

After power is on, press Power key twice to enter shooting mode, and in preview state, press Shutter key

to take a photo:

ACT-8030W Quick Start Guide