Denver ACT-5040W Quick Start Manual

ACT-5040W Quick Start Guide

ENG 1

Foreword

Thank you for purchasing our WIFI DV. Before use, please carefully read this User’s

Manual for best performance and longer service life of this product, and properly
keep this manual for future reference.
This manual covers the latest information while it was prepared. The displays and
pictures used in this manual are for better understanding of the operation of the
product. Due to technical reasons and different production batches, the DV you
receive may be different from how it is described herein.
System requirement
Before using and operating your DV, please know the minimum system requirement
to operate it and we strongly recommend you to use a better PC to operate the
product for best performance of the DV. The minimum system requirement to operate
the product is as below:

Features and functions

 Wifi ，photo shooting, video recording，, Timelapse
 1.37-inch color display
 5m effective pixels

 Built-in 800mah Battery for power supply
 USB port + TF card slot

 G-SENSOR (Under Photo/Video mode, it can automatically rotate 180°)

AAppppeeaarraannccee aanndd bbuuttttoonnss

1.1.4-inch color display 2. Buzzer

3. Lens 4. Lens Glass Sheet

5. Loudspeaker 6. Charging Indicator (blue)

7. Shutter button 8.busy indicator (indicator for video/photo
mode)(red)

9. Power/Menu 10.WiFi/Selection

11.WiFi Indicator (red) 12. Dust Cover

13. Reset 14.TF Card Slot (Insert TF Card)

15. Micro-USB port (connecting PC)

I. Using your Wifi DV for the first time

1. Insert a micro SD or a micro SDHC card first, see right picture

Please notice: UHS (ultra highspeed) cards doesn’t work, as they are

not 100% backward compatible

High speed card of Class 6 or above is recommended. When using professional video mode, Class

10 is required.

Turn off your DV before inserting/removing card.

2. Power on/off

Power on: press the button and hold for 3 seconds, The Video indicator lights in red (Video
mode by default after power-on)

Power off: press the button and hold for 3 seconds, the buzzer will beep once.

3. Charging battery

Built-in lithium battery is applied to this device. While power-off, connect the DV to the PC by a USB

cable to charge the battery; while charging, the charging indicator will remain on. It takes about 3

to 4 hours to fully charge the battery, and the indicator will go off when charging completes.

Remark: blue lamp while charging, red lamp while working and in wifi mode;

4. Function mode switch
6 modes are available for this camera including Video Recording, Photo, Continuous Shooting,

Timelaps, Playback and Setting. Start up the camera, and press Power button to enter Mode
interface; please press WIFI button to select a mode, and then press Shutter button to confirm;

then it will enter the mode you’ve chosen , and the chosen mode will be displayed with

background color; (as shown below)

5. Mode Preview

Start it up, and the camera will directly enter Video Recording mode; under preview mode,

press Shutter button to conduct video recording; press Shutter button again, it will stop shooting;

if the memory card is full or the battery is low, it will automatically stop shooting also:

Video mode Photo mode

System Requirements

Operating System

Microsoft system:Microsoft Window 2000，XP, Vista, 7，8
Apple system: Mac OS X ver: 10.0.0 or above version

CPU

Intel Pentium of more than 1GB Hz or other CPU with equivalent
performance

Internal Memory

Larger than 1GB

Sound Card and
Display Card

The sound card and video card shall support DirectX8 or higher
version.

CD Driver

Speed of 4 times or faster

Hard Disk

Free space of more than 2GB

Others

USB1.1 or USB2.0 port

ACT-5040W Quick Start Guide

ENG 2

Continuous shooting mode Timelaps mode

6 Playback mode：

6.1 Start it up to enter Video Recording mode; then press Power button for mode
selection; press WIFI button to select playback mode, and press Shutter button to
enter; (as shown below):

Playback mode

6.2 Photo Example

1. Playback Mode Icon

2.Current File Number/Total Files

3. The date of photo

6.3 Frames under Playback Mode Introduction:

6.3.1 Frames of Video Recording File

1. Playback mode icon

2. The date for video recording

3. Current File Number/Total Files

4. Playback Timer

5. Operation Indicator Icon (Press Power Button to stop)

6. Operation Indicator Icon (Press Shutter button for Pause)

Note: Under playback mode, press WIFI button to select other photos/video recording files to

realize loop selection.

6.4 Playback Mode Menu Setting

Quit from Playback mode, and press Power button to enable the mode interface; select Setting

mode, and press Shutter button to enter Menu; then press WIFI button to select Menu; press

Shutter button again to enter Sub-menu; the chosen Item in the Menu will be displayed with

background color; press WiFi button again to select the secondary sub-menu and press Shutter

button for confirmation; press Power button to quit from Menu setting.

7. Menu Setting

Under Video Recording/Photo and Timelaps mode, press Power button to enable the mode

interface; select a mode you need to set, and press Shutter button to enable the Menu; then, press

WiFi button to select Menu, and press Shutter button to enter Sub-menu; the chosen item in the

Menu will be displayed with background color; press WiFi button again to select secondary

sub-men, and press Shutter button for confirmation; press Power button to quit from Menu

Setting.

APP (support Android and iOS)

I. Installing the APP

1. For Android, search for “DENVER ACTION CAM 2” at Play Store and install the

APP according to the prompt.

2. For iOS, search for “DENVER ACTION CAM 2” at APP Store and install the APP

according to the prompt.
II. Android APP

No.

Icon Name

Description

1

Video mode

It is under Video mode

2

Video
resolution

Current Resolution: 1920x1080 30 frame; 1280x720 60
frame/30 frame are optional;

3

Recording
Time

It indicates the currently available recording time.

4

Quality

It indicates excellent current quality.

5

Battery
Icon

It indicates current battery is full.

6

Photo mode

It is under Photo mode

7

Photo size

Current photo size: 5M(2560x1920), 8M(3264X2448) and
3M(2048X1536) are optional.

8

Number of
Photo

It indicates current number of photo can be taken.
No.

Icon Name

Description

1

Photo mode

It is under Photo mode

2

Photo size

Current photo size: p5M(2560x1920), 8M(3264X2448) and
3M(2048X1536) are optional.

3

Continuous
Shooting

10 photos can be shot continuously; 3/5 photos are optional.

4

Quality

It indicates excellent current quality.

5

Battery icon

It indicates current battery is full.

6

Number of Photo

It indicates current number of photo can be taken.

7

Video mode

It is under Video mode

8

Video resolution

Current resolution: 1920x1080 30 frame; 1280x720 60
frame/30frame are optional.

9

Recording time

It indicates the currently available recording time.

10

Timelaps icon

It is under Timelaps mode for recording.