RFID table scanner
®
UR20 SERIES
Ultra-thin stationary
scanner that can be
installed anywhere
Long
Life
Offers good products for a long time.
DENSO WAVE supplies products stably for a long time.
DENSO WAVE promises to continue maintenance service for
5 years after product’s sales end.
Dimensions Unit: mm (for reference only)
Options (Sold separately)The set includes
System confi guration
Software (Sold separately)
For more information, please visit our website
http://www.denso-wave.com/en/adcd/
●Appearance and specifi cations are subject to change without prior notice. ●Description stated in this catalogue is as of December, 2016.
DENSO WAVE INCORPORATED
1613A-2 2016.12
● Antenna fi xture
(B-URANR1-01)
● Antenna (URAN-R2)*
1
● Antenna (URAN-R3C)*
2
● Antenna cable (CBAN-CGT272000/GT27-01)
● AC adapter
*1: Only for UR21
*2: Only for UR22
● Instruction manual
● Instruction manual
● Antenna
URAN-R2/URAN-R3C
● Controller
* For dimensions of the antenna fi xture (B-URANR1-01), please visit our website.
* Antenna and Antenna cable are
not included.
* Antenna and Antenna cable are not included.
Antenna cable
Antenna cable
Antenna cable
AC adapter
(AD2-1005/3000)
AC adapter
(AD2-1005/3000)
Controller
(URCT-M21)
Controller
(URCT-M22)
Antenna
(URAN-R2)
Antenna
(URAN-R2)
Antenna
cable
Antenna
(URAN-R3C)
Antenna
(URAN-R3C)
RS-232C cable (D-sub9 pin)
USB (mini USB B Type)
* This cable is not included.
USB cable (mini USB B Type)
Ethernet cable
* This cable is not included.
Items that are included in the set are indicated in
blue.
Items that are included in the set are indicated in
blue.
4 × M4
(screw depth: 4 mm max.)
As shown in the fi gure above,
VESA-compliant screw holes are
located on the back.
[UR21-MR-01]
● Controller (URCT-M21)
● Antenna (URAN-R2)
● Antenna cable (between antenna and controller)
● Rear cover (lock nuts included in package)
● Safety Precautions
● Screws for securing the antenna
[UR22-MR-01]
● Controller (URCT-M22)
● Antenna (URAN-R3C)
● Antenna cable (between antenna and controller)
● Rear cover (lock nuts included in package)
● Safety Precautions
● Screws for securing the antenna
● OPOS Driver
(POS Connection/Windows Version)
● Control Command DLL File
This fi le can be downloaded for free from QB Direct on
our Website.
UR21
UR22
PC
PC
POS register
UR20 Series specifi cations
Model
(RS-232C/USB model)
UR21-MR-01*
1
(Ethernet/USB model)
UR22-MR-01*
1
RFID
Readable and writable RF tag ISO/IEC18000-63 TypeC (EPCglobal Class1 Gen2) -supported Tag
Frequency 865.7–867.5 MHz
Channel width/number of channels 600 kHz/4 ch
Transmission output 500 mW ERP
Modulation method PR-ASK
Transmission rate 40 kbps
Scanning distance*
2
0–800 mm (Avery Dennison AD-229r6) 0–2500 mm (Avery Dennison AD-229r6)
Output adjustment 5–23 dBm
LED indication function
PW: power supply (green), COM (red), ANT1 (orange),
ANT2 (orange) 4 total
Interface
RS-232C (D-SUB 9P),
USB (mini USB B Type)
LAN (RJ45),
USB (mini USB B Type)
Power
Power supply AC adapter (100 V)
Current consumption 1300 mA MAX (excluding inrush current)
Operating temperature 0–40°C -5–50°C
Structure
Dimensions
Controller: 90 × 108.5 × 31 mm
Antenna: 200 × 200 × 17.5 mm
Weight
Controller: Approx.130 g
Antenna: Approx.360 g
Controller: Approx.130 g
Antenna: Approx.400 g
Components
Controller 1 (including a rear cover and screws for securing the rear cover)
Antenna 1 (with VESA-compliant screw holes)
Antenna cable Double-end RF connector (GT27) cable (2000 mm long)
Antenna securing screws 4
*1: Do not connect an antenna, a controller or a cable that is not specifi ed by Denso Wave.
*2: Network range may vary according to target tag. Network range is a reference value and this may vary accordingly, depending on the actual
environmental conditions.