Delvcam DELV-TOUCH-10SDI User Manual

Delvcam

DELV-TOUCH-10SDI

User Guide

IMPORTANT SAFETY INSTRUCTIONS:

 Please read User Guide before using this product.
 Please keep User Guide for future reference.
 Please read the cautions to prevent possible danger and loss of property.

FEATURES:

 Capacitive touch screen

 170° Wide viewing angles;

 High resolution: 1280×800;

 Wide voltage: DC 7-24V;

 High contrast: 800:1;

 POP-UP shortcut menu.

CAUTIONS:

1. Please do not place the display screen towards the ground.

2. Please avoid heavy impact or drop onto the ground.

3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft

cloth to maintain the brightness of the surface.

Please do not block any vent hole.

4.

5. Please follow the instructions and trouble-shootings to adjust the product. Other improper
adjustment may result in damage. Any further adjustment must be performed or conducted
by a qualified technician.

6.

Please unplug the power and remove the battery if long-term no-use, or thunder weather.

Contents

1. PRODUCT DESCRIPTION ...................................................................................................... 2

3. INSTALLATION OF SUNSHADE AND BATTERY PLATE ................................................ 4

4. DV BATTERY MOUNT PLATE .............................................................................................. 4

5. WIRING INSTRUCTIONS ....................................................................................................... 6

6. MENU SETTING ....................................................................................................................... 6

7. ACCESSORIES ........................................................................................................................ 12

8. PARAMETERS ........................................................................................................................ 13

9. TROUBLE SHOOTING .......................................................................................................... 14

1

1. PRODUCT DESCRIPTION

1．Dial: turn up and down to adjust the value of menu option; press to confirm.

2．INPUT: circularly switch among of VIDEO, HDMI, VGA and SDI.
3．F1-F3: User-definable buttons.

Default function:
F1: Waveform F2: Vector F3：Level Meter

（function customized to meet your needs）

2

1. VGA interface.

2. Battery power on/off switch:

“O” is power off; “|” is power on.

3. DC 12V power input.

4. DC/TALLY connector.

5. HDMI input interface.

6. HDMI output interface (Optional).

7. Video output interface.

8. A / V input interface.

9. Earphone jack.

10. SDI output interface (Optional).

11. SDI input interface (Optional).

12. Speaker

13. Slide to left to connect power cable (connecting with the battery

plate).

14. VESA Mounting interface

3

3. INSTALLATION OF SUNSHADE AND BATTER Y PLA TE

Installation of sunshade:

 As shown, buckle the upward side of sunshade cover on the device.
 As shown, press the under buckles of sunshade cover at the same time.

 As shown, bend sunshade panel to meet and paste with sunshade

interlocking.

 Installation completed.

4. DV BATTERY MOUNT PLATE

Standard mounts process

4

Following three types of battery plates are suitable for this device, model

F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).

MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6

DV Battery Mount Plate Specification:

Model DU21 for battery of Panasonic DV: NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK

series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.

Mode

DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV116/DCR-DVD/PS105
K/300K/10P/1E series.

Model F970 for battery of SONY DV: DCR-TRV series, DCR-TRV E series, VX2100E PD P

series, GV-A700, GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.

Model LP-E6 for battery of Canon DSLR: 5D Mark II/5D Mark III/EOS7D/EOS60D

l QM91D for battery of SONY DV:

;

V -mount battery plate (optional):

battery specifications.

5

Please refer to GP-L130AB type

Plate Bracket

V-mount Battery Plate

Anton Bauer mount battery plate (optional):

Plate Bracket

Please refer to GP-L130B type battery specifications.

5. WIRING INSTRUCTIONS

Composite cable

Anton Bauer Mount Battery Plate

White: audio L

Red: audio R

Yellow: video

A/V signal input

6. MENU SETTING

Before setting the functions, please make sure the device is
connected correctly.

6

6-1. Touch Control Gesture

Swipe up to activate the
shortcut menu.

Swipe down to hide the
shortcut menu. (Unable to
hide the shortcut menu
without signal input.)

6-2. F1-F3 3 user-definable function buttons:

Long press any F1-F3 key for 3-5 seconds to pop-up shortcut menu

directly. As shown in Figure (default menu button in blue font).

Slide up and down to select the desired option.

Finally, press the slider to confirm the selected item as default.

Functions of FN button can also be customized: Center Marker, Screen
Marker, Check Field, Color Bar, Aspect Ratio, Camera, PIP, Zoom,
Pixel-to-Pixel, Freeze Input, Underscan, H/V Delay, Peaking, False
Color, Exposure, Histogram, Level Meter, Waveform, Vector.

FN: user-definable function button.

Default function:
F1: Waveform F2: Vector F3: Level Meter

6-3. Dial Operation

Turn down the dial to activate Brightness adjustment.

Turn up and down to adjust the value directly.

Press the dial to activate options switch among of “Brightness, Contrast,

7

Saturation, Sharpness, Hue, Volume and Exit”. (Option adjusted currently

will be default option when user press the dial next time.)

6-4. MENU Operation

6-4-1、Shortcut Menu Bar

Swipe up on the display screen to activate shortcut menu, select the

option needs to adjust on the menu bar. (Top menu bar: option values all

shown on screen when click; Bottom menu bar: option values shown

individually on screen when click.)

6-4-2. Clock”

” is return,” ” is exit.

“

 Main interface

8

”, enter the menu options

 Picture

ITEMS OPTIONS

Brightness 0 – 100
Contrast 0 – 100
Saturation 0 – 100
Hue 0 – 100
Sharpness 0 – 100
Back light 0 – 100
Volume 0 – 100

 Display

9

ITEMS OPTIONS

Auto OFF, ON
Phase 0 – 63
Clock 0 – 100
H-Position 0 – 100

Options under VGA
mode.

V-Position 0 – 100
Image Flip OFF, ON
Color Bar OFF, ON

 Color Temp

ITEMS OPTIONS

Color Temp 6500K/ 7300K/ 9300K/ User
R Gain 0 ~ 255
G Gain 0 ~ 255
B Gain 0 ~ 255
R Offset 0 ~ 511

Note: Only available under “User” mode

to meet the color value you need.
G Offset 0 ~ 511
B Offset 0 ~ 511

10

、Marker

ITEMS OPTIONS

Center Marker OFF, ON
Marker Color Red, Green, Blue, White, Black
Marker Mat 0 – 7
Thickness 1 – 8

 PIP

ITEMS OPTIONS

PIP Mode Small, Medium, Large, PBP, POP
PIP Source Video, VGA , HDMI and SDI (SDI is optional)
PIP position Upper Left, Upper Right, Lower Left, Lower Right
PIP Swap Signal adjust & switch under PBP and POP modes.

11

 Setting

ITEMS OPTIONS

Language English, Chinese
LOGO ON, OFF
Camera 480P (5DII Mode) / 1080I (5DIII Mode)
Peaking Color Red, Green, Blue, White, Black
Peaking Lever 0 – 100
Exposure Lever 0 – 100
Reset
Upgrade

7. ACCESSORIES

Standard Accessories:

12

1. Sun Shade Cover 1 Piece

2. Gimbal bracket

3. HDMI A/C cable

4. Mini XLR & TALLY cable

5. 12V DC adapter

6. Shoe Mount (for camera only)

7. Audio output cable

8. Composite cable

9. VESA Adaptor Panel

10. Battery Plate

11. Adaptor Panel

12. Suitcase

13. Manual

1 Piece

(F-970/QM91D/DU21/LP-E6) 2 Pieces (Choose 2 out of 4)

1 Piece

1 Piece

1 Piece

1 Piece

1 Piece

1 Piece

1 piece

Optional Accessories

1 Piece

1 Piece

1 Copy

1. VESA folding bracket 1 Piece

2. VGA cable

3. V-mount Battery Plate

4. Anton Bauer Mount Battery Plate

5. Li-ion Battery

8. PARAMETERS

13

1 Piece

1Piece

1Piece

1Piece

9. TROUBLE SHOOTING

1. Only black-and-white display:

Check whether the color saturation is properly setup or not.

2. Power on but no pictures:

Check whether the cables of AV, VGA, HDMI and SDI are correctly connected or not.

Panel 10.1” LED Back light

Physical Resolution 1280×800

Brightness

Contrast 800: 1

Viewing Angle 170°/ 170°(H/V)

Input Voltage DC 7-24V

Input Signal AV, HDMI, VGA and SDI (SDI is optional)

Power Consumption ≤ 10W

Operating Temperature

Storage Temperature

Dimension (LWD) 250×170×29.6mm

Weight 735g

Please use the standard power adapter coming with the product package. Improper
power input may cause damage.

350cd/㎡

-0℃~50℃

-20℃~60℃

3. Wrong or abnormal colors:

Check whether the cables are correctly and properly connected or not. Broken or

loose pins of the cables may cause a bad connection.

4. When on the picture shows size error:

Swipe up to activate menu, Click “Underscan” to zoom in/out pictures automatically

when receiving HDMI signals

5. Other problems:

Swipe up to activate menu, Click “

→Setting→ Reset ”

6. According to the ISP, the machine can not function properly:

ISP for program upgrades, non-professionals do not use. Please reboot your

device if press accidentally!

· It is normal to see some bright lines appear on the screen when turn off the device.

Note: due to constant effort to improve products and product
features, specifications may change without notice.

14