Delvcam
DELV-SDI-IP
User Guide
IMPORTANT SAFETY INSTRUCTIONS:
Please read User Guide before using this product.
Please keep User Guide for future reference.
Please read the cautions to prevent possible danger and loss of property.
FEATURES:
High resolution: 1280×800;
Wide voltage: DC 7-24V;
High contrast: 800:1;
170°/ 170°(H/V) wide viewing angles, to provide better viewing effect;
Lux Auto Backlight (Optional).
CAUTIONS:
1.Please do not place the display screen towards the ground.
2.Please avoid heavy impact or drop onto the ground.
3.Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4.Please do not block any vent hole.
5.Please follow the instructions and trouble-shootings to adjust the product. Other improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6.Please unplug the power and remove the battery if long-term no-use, or thunder weather.
Contents
1. PRODUCT DESCRIPTION ...................................................................................................... |
2 |
2. REMOTE CONTROL................................................................................................................ |
5 |
3. DV BATTERY MOUNT PLATE ............................................................................................... |
5 |
4. WIRING INSTRUCTIONS........................................................................................................ |
7 |
5. MENU SETTING........................................................................................................................ |
8 |
6. ACCESSORIES......................................................................................................................... |
12 |
7. PARAMETERS......................................................................................................................... |
13 |
8. TROUBLE SHOOTING .......................................................................................................... |
13 |
|
1 |
YP-01140726
1. PRODUCT DESCRIPTION
1.Auto backlight receiving window (Optional).
2.Infrared signal receiver (work with remote control).
3.Power indicator light (red while standby; green while working).
4.Dial: Turn the dial to adjust volume;
Turn the dial to select menu option and adjust the option value;
Press the dial to confirm.
5.M/EXIT: To activate or exit OSD menu.
6.FN: Image auto capture function under VGA mode;
Underscan function under HDMI mode.
7.INPUT: circularly switch among of AV1, AV2, PC, HDMI, DVI or SDI.
8.POWER: ON/OFF.
9.Mounting socket.
2
Without SDI:
1 VGA interface.
2 DC 12V power input.
3 HDMI / DVI input interface.
4 I / O control interface.
5 A / V input interface.
6 Earphone jack
7 Speaker
8 VESA Mounting interface.
9 Slide to left to connect power cable (Connecting with the battery plate).
3
With SDI:
1.VGA interface.
2.Battery power on/off switch: “O” is power off; “|” is power on.
3.DC 12V power input.
4.DC / TALLY connector.
5.HDMI / DVI input interfaces.
6.HDMI output interface.
7.Video output interface.
8.A / V input interface.
9.Earphone jack.
10.SDI output interface.
11.SDI input interface.
12.Speaker.
13.Slide to left to connect power cable (connecting with the battery plate).
14.VESA Mounting interface
4
Loading...