DELVCAM DELV-HD7 User Manual

1

DELV-HD7

HDMI-VGA-VIDEO MONITOR

With Dual Composite Video/Audio

USER MANUAL

Thank you for purchasing the DELVCAM HD-7 High Definition liquid crystal display monitor. This
product employs new integrate circuits and high quality TFT LCD modules. It operates with low power
consumption, emits no radiation, and is a compact form factor. The color TFTLCD is the most suitable
display for VGA,VCD, DVD and GPS system for motorcars and ships. It also can be used in the high
end media facilities for in-line monitoring of HDMI, VGA and Composite Video signals. This product is
manufactured to the highest standards and will operate well in all applications where performance is
demanded but for a cost effective price.

2

CONTENTS

1. PRODUCT DESCRIPTION --------------------3

 DESCRIPTION OF MONITOR FUNCIONS --------------------3

 REMOTE CONTROLLER --------------------4

 MEDIA BREAKOUT CABLE --------------------5

2. MENU OPERATION --------------------6

SPECIFICATIONS:

DISPLAY PANEL TFT LCD 7” LCD MONITOR 144000 Pixels
RESOLUTION 800X480(VGA)
UP RESOLUTION 1920X1440(VGA)
BRIGHTNESS 300 cd/m

2

CONTRAST 500:1
VIEWING ANGLE 70deg/70deg, 50deg/50deg (L/R, UD)
INPUT VIDEO 0.7 to 1.4Vpp/75 ohm(composite video)
VGA SIGNAL INPUT H:30 @60Hz, V:60@75Hz
SPEAKER Sensitivity: 250mW/8 ohms
COLOR FORMAT NTSC/3.58 PAL/4.43
POWER 12 VDC @ 10WATTS
SIGNAL INPUTS TYPE HDMI1.3, VGA, AV1, AV2 with Mono Audio
OPERATING TEMPERATURE -20deg C to 55deg C
DIMENSIONS 208mm(W) X 146mm(H) X 34mm(D)

8.9”W X 5.75”H X 1.34”D

To ensure the best use of the unit, please read this handbook carefully beforehand.

3

DESCRIPTION OF MONITOR FUNCTIONS

Picture 1（A）

1. Indicator light

2. : Power on/off

3. ：(VGA), AV switch.

4. ：Volume down or to adjust the value of setting function

5. Infrared receiving window

6. ：Volume up or to adjust the value of setting function

7. ：To activate OSD menu.

8. ：Selection key, to adjust phase directly.

9. ：Selection key, to adjust the brightness directly.

10. DC12V input jack( used when Media Breakout Cable is not used)

11. HDMI input jack

12. MEDIA BREAKOUT JACK

4

REMOTE CONTROL OPERATION

1. ：Power on/off

2. : MUTE

3. : To activate OSD menu.

4. : Volume down or to adjust the value of setting function

5. : Volume up or to adjust the value of setting function

6. : Selection key, to adjust the brightness directly.

7. : Selection key, to adjust phase directly.

8. : Aspect ratio switch,4：3/16:9

9. ：UP/ DOWN Switch

10. ：Right/Left Switch

11. ：AV1/AV2/ PC(VGA)Switch