Delvcam DELV-DSLR-7L User Manual

Delvcam

DELV-DSLR-7L

User Guide

IMPORTANT SAFETY INSTRU CTIONS:

�

Please read manual before using this product.

�

Please keep manual for future reference.

�

Please read the cautions to prevent possible danger and loss of property

�

Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.

CAUTIONS：

1. Please do not place the display screen toward the ground.

2. Please avoid heavy impact or drop onto the ground.

3. It should avoid the humidity and extreme temperature

4. Do not place with your equipment or accessory and other inflammable liquid,
the gas or other explosive articles place together, to avoid happening
dangerous.

5. The LCD screen is very easy to shave a wound, avoid crashing please. Be sure
not to use other sharp article to bump against touch screen.

6. Please do NOT use chemical solutions to clean this product. Please wipe with

a clean soft cloth to maintain the brightness of the surface.

7. Please do not block any vent hole.

8. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.

9. Please unplug the power or remove the battery if long-term no-use, or thunder
weather.

Table of Contents

PRODUCT DESCRIPTION ---------------------­INST ALLATION OF SUNSHADE COVER
AND BATTERY PLATE--------------------------­MENU SETTING ----------------------------------­ACCESSORIES ------------------------------------­PARAMETER --------------------------------------­TROUBLESHOOTING ----------------------------

1

PRODUCT DESCRIPTION

Positive:

1. Speaker

2. Power indicator light：Light turns red when powered.

3. ◄ Left selection key, to select items on OSD menu and value option

adjustment; Press to adjust the brightness, sharpness, contrast, saturation,
volume and Tint value decrease （ Tint adjustment is only available under
VIDEO and NTSC mode）.

4. ► Right selection key, to select items on OSD menu, value option
adjustment and confirmation; Press to adjust the brightness, sharpness,
contrast, saturation, volume and Tint value increase （ Tint adjustment is
only available under VIDEO and NTSC mode）.

5. MENU ： To activate OSD (on-screen display) menu. Select switch the

brightness, sharpness, contrast, saturation, volume, Tint, MENU and Exit.

6. ▲/5D-ⅡUp selection key, Used to select menu options; Click to switch ON/
OFF 5D-Ⅱ mode.

/ Down selection key, Used to select menu options; Click to switch

7.
ON/OFF pixel-to-pixel mode.

8. F1-F4：4 user-definable buttons：

Default func ti on:
F1: Screen Marker F2: Aspect Ratio

F3: Check Field F4:Undersca n （The feature is available

when the pixel-to-pixel mode is of f.）

9. Earphone jack.

2

Back:

10. Mini USB input. (Only for program upgrades, do NOT use if
non-professionals)

11. Battery plate slot.

12. HDMI (High Definition Multimedia Interface) signal input.

13. HDMI (High Definition Multimedia Interface) signal loop output. (optional)

14. DC 12V power input.

“

15. Battery power on/off switch:

DC power.

‖” is battery power; “O” is power off; “|” is

INSTALLATION OF SUNSHADE COVER
AND BATTERY PLA TE

Installation of sunshade cover：

3

Installation steps Installation completed

Disassembly of sunshade cover：

Disassembly steps： Disa ssembly completed ：

4

Steps of sunshade cover on / off:

* Please follow the instructions steps, or may damage the cover.

Open Step: Closed steps:

* Do not press the edge in the under of the cover, otherwise it will result

in open failure.

Installati on of Battery and Battery Mount Plate

The included three types of battery plate are suitable for this device, Standard
accessories model: F970.

5

DV Battery Mount Plate Specification:

Model DU21 for battery of Panasonic DV:

NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with

Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi

DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.

Model QM91D for battery of SONY DV:

DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV11

6/DCR-DVD/PS105K/300K/10P/1E series.

Model F970 for battery of SONY DV:

DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,

GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,

HVR-V1C, FX7E F330.

MENU SETTING

*Before setting the functions, please make sure the device is connected

correctly.

1. Shortcut keys:

1-1. the image menu

When power on, press “◄/►” key on the device, Will appear at the bottom of the

screen display of the brightness, Then press the MENU button to select

sharpness, contrast, saturation, volume, Tint, MENU and Exit. Required by the

user according to personal to User can adjust the parameters of the selected
menu with ◄ / ► button, according to their requirements.

brightness,

6

1-2. Switc h on / off 5D-Ⅱ camera mode

Connect the HDMI input interface with Canon 5D-Ⅱcamera, turn on the power,

press the ▲ / 5D-Ⅱ button to switch on / off 5D-Ⅱ camera mode.

1-3. Pixel -to -Pixel

Turn on the power, press the / button to switch on/off pixel-to-pixel

function.

1-4. F1-F4 4 user-definable function buttons:

Functions of F1-F4 buttons can also be customized: Aspect Ratio, Check Field,
Freeze Input, Center Marker, Underscan, H/V delay, Color Bar, Screen Marker
and Zoom( Peaking, False color, Exposure and Histogram are for optional).

F1-F4：4 user-definable function buttons.

Default function:
F1: Screen Marker F2: Aspect Ratio

F3: Check Field F4:Underscan （The feature is available

when the pixel-to-pixel mode is of f.）

2. MENU Setting

When power on, press “MENU” on the device. The menu of function setting will

display on the screen.
Press ◄/► buttons on the choose main menu the display. Then press ▲/
Selection screen displayed on the sub-menu options; then ► to confirm the
selection and adjustment of option value. After confirmation the main menu press
the MENU key to return

key,

7

ITEMS

O

PTIONS

Color Temp 6500ºK/7500 ºK/9300 ºK/User

Red Note: Only can available

under “User” mode to meet
the color value you need.

Check Field

Green
Blue

OFF，MONO，Red, Green and Blue
Aspect Ratio Full Screen,4:3 and 16:9
Pixel-to-Pixel ON/OFF
Camera ON/OFF
H/V delay OFF,H&V Delay, V Delay and H Delay
Underscan ON/OFF

ITEMS

O

PTIONS

Center Marker ON/OFF
Screen Markers OFF, 95%,93%,90%,88%,85% and80%

8

ITEMS E

O

PTIONS

Language English /Chinese
Input Format OSD

5S、10S、15S

LOGO ON/OFF
Freeze Input ON/OFF
Image Flip ON/OFF
Manufacturer Default OK/Cancel
ISP For program upgrades (such as accidentally

press to reboot your computer)

Ver LLP

Ver

1.1

Functions of F1-F4 buttons can also be customized: Aspect Ratio, Check Field,
Freeze Input, Center Marker, Underscan, H/V delay, Color Bar, Screen Marker
and Zoom( Peaking, False color, Exposure and Histogram are for optional).

9

ACCESSORIES:

Standard accessories:

1. Folding sun shade 1 piece

2. DC adapter 1 piece

3. HDMI Type A-C 1 piece

4. Manual 1 piece

5. Battery Plate: F-970 1 piece

6. Shoe mount (for camera only) 1 piece

Optional access or ie s :

1. Battery Plate: DU21 1piece

2. Battery Plate: QM91D 1piece

3. Li-ion battery 1piece

10

PARAMETERS:

Panel Size 7’’ TFT LCD
Resolution 1024×600, up to 1920×1080
Brightness
Contrast 800:1
Viewing Angle 160°/ 150°(H/V)
Input Voltage DC 12V
Input Signal
Output Signal HDMI (optional)
DV Battery F970/DU21/QM91D(optional)
Battery Plate F970, DU21/QM91D(optional)
Current 800mA
Power Consumption
Working Temperature
Storage Temperature
Size:(LWD) 196.5×145×31mm

Weight 480g

250cd/

HDMI

10W

≤

-20℃～60℃

-30

℃～70℃

196.5×145×41mm (with sun shade closed)

196.5×145×151.3mm (with sun shade open)

㎡

TROUBLE SHOOTING

1. Only black-and-white display:

Check whether the color saturation is properly setup.

2. Power on but no pictures:

Check whether the cables of HDMI correctly connected. Please use the standard

power adapter coming with the product package. Improper power input may

cause the device.

3. Wrong or abnormal colors:

Check whether the cables are correctly and properly connected. Broken or loose

pins of the cables may cause a bad connection.

4. According to the
ISP for program upgrades, non-professionals do not use. If accidentally press

this key, restart the system.

ISP,

the machine cannot function properly

11

Note:
It is a normal phenomenon to see bright stripe when power off.
Due to constant effort to improve products and product features,

specif ications may change wi thout notice.

12