Delvcam DELV-8LCD-SDI User Manual

Delvcam

DELV‐8LCD‐SDI

1RU Rackmount 8‐LCD 3G‐SDI Video Monitor

IMPORTANT SAFETY INSTRUCTIONS

 Read manual before using this product.

 Keep manual for future reference.

 Do not place the display screen on the ground.

 Avoid heavy impact or dropping.

 Do NOT use chemical soluƟons to clean this product.

Wipe with a clean soŌ cloth to maintain the brightness of the surface.

 Do not block any vent holes.

 Follow the instrucƟons when making adjustments.

 Unplug the power and/or remove the baƩery if you do not plan to use the moni-

tor for an extended period of Ɵme.

FEATURES

8 Display Screens in a 1RU Monitor

Supports up to 1920x1080

Mulple Features

EqualizaƟon, Reclocking, UMD Character FuncƟon, Looping Output, RS422 Remote
Control

Embedded Audio Meters & Linear Time Codes

AcƟvated with DIP switches for each monitor

Computer Interface

Control funcƟons such as brightness, contrast, UMD, audio level meter, and Ɵme code
for each monitor

INCLUDED ACCESSORIES

 15VDC/2.5A Power Adapter
 Power Cord

Delvcam DELV‐8LCD‐SDI Page 2

SPECIFICATIONS

Display Screen: 2 inch LCD, LED backlight

Resolution: supports up to 1920x1080 , 640 x 240 native resolution

Brightness: 250cd/m²

Aspect Ratio: 4:3

Viewing Angle: 80°/ 70°(H/V)

Input Signal: 3G-SDI

Output Signal: 3G-SDI

Remote Control: RS422

HDMI Formats: Full HD-HD 1080p, 1080i, 720p, 576p, 576i, 480p, 486i

SDI Formats:

SMPTE-125M

SMPTE-292M 1080p(30/29.97/25/24/24sF/23.98/23.98sF)

SMPTE-296M 720p(60/59.94/50/30/29/25/24/23.98)

Contrast 300:1

480i(59.94),1080i(60/59.94/50)1080p
(30/29.97/25/24/24sF/23.98/23.98sF
(60/59.94/50/30/29.97/25/24/23.98)

SMPTE-372M

SMPTE-425M-AB 1080p(60/59.94/50)

Level A & Level B 720p(60/59.94/50/30/29.97/25/24/23.98)

Level B 2X 1080i(60/59.94/50)

ITU-R BT 656:576i(50)

Audio: Embedded Audio Meter per screen

Input Voltage: 12-24VDC

Current: 15VDC/2.5A

Power Consumption: 23W

Dimensions (LxHxD): 19 x 4.13 x 1.73 in

Weight: 3.43 lb

Delvcam DELV‐8LCD‐SDI Page 3

720p(60/59.94/50),1080i(29.97/25/24/23.98),
1080p

FRONT

REAR

Time Code

Audio Level Meter

1 2 3 4 5 6

1 Power Off/On

2 15VDC Power Jack

3 RS422 Input for Computer Interface

4 SDI Output

5 SDI Input

6 DIP Switches: Up = ON

1 Time Code—Controls monitors to the left of Switch

2 Audio Level Meter —Controls monitors to the left of Switch

3 Time Code—Controls monitors to the right of Switch

4 Audio Level Meter—Controls monitors to the right of Switch

Delvcam DELV‐8LCD‐SDI Page 4

Time Code*: Switches 1&3 Audio Level Meter: Switches 2&4

* Timecodes are preconfigured for LTC. If you need to change to VITC, use the computer interface.

SOFTWARE INTERFACE OPERATION

1. In COM Seƫngs, select the hardware connecƟon and click OPEN to open the
serial port.

2. Choose a monitor under Select Monitor. Select one or all.

3. Set funcƟons: Brightness, Contrast, Time Code, Level Meter, and UMD.

4. UMD Data: Enter no more than 32 characters. Click Data Send to display the
characters. Default seƫngs are the numbers 1 through 8.

5. The interface operaƟon overrides dipswitch seƫngs for audio level meters and
Ɵme codes.

Delvcam DELV‐8LCD‐SDI Page 5

TROUBLE SHOOTING

No Image

- Ensure that the cables are properly connected.

- Use the standard power adapter that is included as improper voltage
input may cause damage or injury.