Page 1
DELV-2LCD-7XLPRO
DELV-2LCD-7XLRM
DELV-2LCD7XLS (SDI)
DUAL NTSC 7" COLOR TFT 16:9 / 4:3
LCD R
ACKMOUNT MONITOR SERIES
USER MANUAL
Page 2
I. Product Description
Get ready for the new and demanding high resolution video production market, the
Delvcam LCD series advanced monitoring system is loaded with features. A dual monitor rackmount solution for the high end video environment, the Delvcam LCD series
provides both 16:9 and standard 4:3 aspect ratio video monitoring in a well designed,
rackmount housing with optional adjustable pitch.
DELV-2LCD-7XLPRO
Tilting Model
Features:
Picture Mode Select: 16:9 Wide Cinema Mode
4:3 Normal Mode
4:3 Wide Mode
4:3 Full Mode
Looping BNC inputs
High Resolution Performance
NTSC-M
Standard CATV, UHF, VHF TV ATSC Receiver (Monitor A only:
7XLPRO)
Allows 180° of tilt while mounted in rack : 7XLPRO
Low power consumption and heat dissipation for mobile applications
Fits in standard 19" rack, 4 spaces high
On screen color, tint, brightness and contrast controls
Wireless I/R remote control
Assembled in USA, 90 Day Warranty
II. Product Specifications
DISPLAY 7” active matrix TFT-LCD(16:9)
BACK LIGHT Internal CCFT
DOT MATRIX 0.129 (H) x 0.447 (V)
RESOLUTION 1440 Horizontal x 234 Vertical
BRIGHTNESS 300 cd/m2(NIT)
CONTRAST 150:1
VIEWING ANGLE U :15 / D :35, R / L :50
PIXEL CONFIGURATION Striped
VIDEO SIGNAL 1Vpp into 75Ω Terminated &
Looping Input
STANDARD NTSC-M
POWER REQUIREMENTS
DELV-2LCD-7XLPRO:
DELV-2LCD7XLS:(SDI) 110-220VoltsAC 50/60 cycAuto switching,14watts
DELV-2LCD-7XLRM: Dual AC Power Adapters 12v 2A
OPERATING TEMPERATURE 32-122 Degrees F (0-50°C)
REMOTE CONTROL Handheld Infrared
DIMENSIONS
DELV-2LCD-7XLPRO: 19"W x 4.5"D x 7"H (4RU)
DELV-2LCD7XLS:(SDI) 19"W x 4.5"D x 7"H (4RU)
DELV-2LCD-7XLRM: 19"W x 1.75"D x 7"H (4RU)
WEIGHT XLPRO-16.0 Lbs.
DELV-2LCD-7XLRM
DELV-2LCD7XLS (SDI)
110-220VoltsAC 50/60 cycAuto switching,14watts
XLS-18.0 Lbs.
RM-10.0 Lbs.
Page 3
III. Items Included
DELV-2LCD-7XLPRO
2
1
1
Hand-Held IR Remote Control Unit (2)
2
75 Ohm Terminator (2)
3
RF Adapter (Monitor A Only)
4
110-220V 50/60Hz Power Adapter: 12VDC @ 4A
Items Included
DELV-2LCD-7XLRM & DELV-2LCD7XLS (SDI)
3
4
4
1
1
Hand-Held IR Remote Control Unit (2)
2
External RF Antenna Adapter Cable (2)
3
Video / Audio Input Cable (2)
4
110-220V 50/60Hz Power Adapter: 12VDC @ 1.2A (2)
5
12V Cigarette Adapter (2)
6
75 Ohm Terminator (2)
2
-- DDEELLVV--22LLCCDD--77XXLLRRMM OONNLLYY
-- DDEELLVV--22LLCCDD 77XX LLSS ((SSDDII)) OONNLLYY
3
DELV-2LCD-7XLRM ONLY
6
5
DELV-2LCD7XLS (SDI) ONLY
Page 4
IV. Front Panel Product Controls
DELV-2LCD-7XLPRO
DELV-2LCD-7XLRM
DELV-2LCD7XLS (SDI)
IR Remote
Complete instructions for LCD setup and operation are covered in the included LCD manual. Please
note that the manual does cover mechanical items and topics that are no longer covered for the
Delvcam dual-rack monitor configuration. It is recommended that you read and study that manual first.
Page 5
V. Rear Panel Connections
DELV-2LCD-7XLPRO
1
1
Power Entry
2
Monitor B - Video input (looping)
3
Monitor B - Audio input
Monitor A - RF (CATV) input
4
5
Monitor A - Audio input
6
Monitor A - Video input (looping)
2
3
VI. Monitor Tilt Operation
1
Mount Monitor in Rack
4
5 6
Side View
2
Push Top or Bottom of Monitor to Tilt as Desired
Page 6
VII. Rear & Side Panel Features
DELV-2LCD-7XLRM
5
1
2
3
4
Interface Area - Side View
Monitor A & B
1
Headphone Jack
2
AV Input 2
3
AV Input 1
4
12V DC Power Input
6
7
8
For presentation clarity, information is
shown for one monitor only
5
Internal Antenna
6
Speaker - Left
7
Speaker - Right
8
External RF Input Jack
Page 7
VIII. Rear Panel Connections
DELV-2LCD-7XLS (SDI)
1
2
3
4
5
7
6
For presentation clarity, information
is shown for one monitor only
1
Audio L-R Input
2
Power Input 12V DC @ 1.2A
3
Encoder Circuit On / Off Note: If battery powered this switch must be turned off after use.
4
Composite Video / SDI Video Switch
5
Composite Video Input - Note: CVI uses side port AV1 input
6
SDI Video Input (terminated)
Composite Video Loop Output
7
REV. 09-16-08
Side View - Composite Video Input
Page 8
SAFETY WARNING
1. To prevent fire or shock hazard, do not expose this equipment to
the environment of high humidity and dust. Do not use it in an
unprotected outdoor installation or any area classified as wet.
2. The temperature for installation should be kept between -40°C ~ +95°C.
Avoid direct sunlight or extreme changes of temperature.
3. For the sake of safety, do not disseminate the unit or put it on an
unstable base. Do not drop it and avoid heavy impact.
4. Ventilation: Openings in the enclosure are provided for ventilation and to
ensure reliable operation of the unit and to protect it from overheating.
These openings must not be blocked or covered. This unit should not be
placed in a built-in installation unless proper ventilation is provided.
5. Cleaning: Unplug the unit from the outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth.
6. Overload: Do not overload outlets and extension cords as this may result
in a risk of fire or electric shock.
7. Object and Liquid Entry: Never push objects of any kind into this
unit through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the unit.
8. Service: Do
opening or removing covers may expose you to dangerous voltage
of other hazards.
not attempt to open or service this unit yourself as
1 Tower Drive
Saugerties, NY 12477
Tel 845-246-0428
Fax 845-246-0626
Loading...