Delta GLIDING BASSINET 27201 Assembly Instructions Adult Assembly Required

GLIDING BASSINET
27201

ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED

Styles and colors may vary

Required: Phillips Screwdriver
IMPORTANT: Read all instructions before assembly and use of the product.
Keep the instructions for future reference.

Customer Care Tel. [phone]

(A)

www.DeltaChildrensProducts.com

DCP Cat # 04-08-11-V1

Consumer Information

WARNING

Failure to follow these warnings and instructions could result in serious injury or death.

• Read all instructions before assembling unit.
KEEP INSTRUCTIONS FOR FUTURE USE.
DO NOT USE THIS UNIT IF THE INSTRUCTIONS CANNOT BE STRICTLY FOLLOWED.

• Before each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or
torn mesh/fabric. Check before assembly and periodically during use. Contact Delta Children’s Products
Customer Service Department at 1-800-377-3777 (8:00am ~ 4:30pm PST) for replacement parts, repair

or instructions.

• DO NOT substitute parts.

• FALL HAZARD—To help prevent falls, DO NOT use this product when the infant begins to push up on
hands and knees or has reached manufacturer’s recommended maximum weight of 15lbs. (6.8kg),
whichever comes first.

• Use bassinet with only one child at a time.

• Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a product or attach strings to toys.

• SUFFOCATION HAZARD: Infants can suffocate:

• In gaps between an extra pad and side of the bassinet/cradle.

• On soft bedding.

• NEVER add a mattress, pillow, comforter or padding. Use ONLY the pad provided by the manufacturer.

• If a sheet is used with the pad, use only the one provided by the manufacturer or one specifically
designed to fit the dimensions of the bassinet/cradle.

• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep,
unless otherwise advised by your physician.

• Never use plastic shipping bags or other plastic film as a mattress covers not sold and intended for
that purpose. They can cause suffocation.

• DO NOT place bassinet near a window where cords from blinds or drapes may strangle a child.
Child may fall out of window.

• DO NOT place cords, straps or similar items that could become wound around a child’s neck in or
near the bassinet.

CARE AND MAINTENANCE

Check bassinet for worn parts, torn material or stitching periodically. Replace or repair the
parts as needed. Use Delta replacement parts.

Manufactured for and distributed by:

114 West 26th Street, New York, NY 10001

2

Customer Service

Tel. [phone]

www.DeltaChildrensProducts.com

MADE IN CHINA

Parts

IMPORTANT! Please remove all parts from the package and identify them before assembly.

Frame

Base Legs Mattress Pad Support Tubes X4

Mattress Support

Fabric Liner Fabric Storage Liner

Canopy

Storage Basket X2

Sheet

Mobile arm

Customer Service Tel. [phone]

G6 Screw X8

Toys

Screwdriver

3

Wheels X4

G5 Screw X4

www.DeltaChildrensProducts.com

Bassinet Assembly

1 3

Note: You may need the help of another adult to help steady all parts for

assembly.

• Place the frame on a flat surface with the support legs facing up.

Support Legs

2

Plastic Slider

Support

• Rotate the support legs out as shown in the above images.

Customer Service Tel. [phone]

• Locate the four (x4) support tubes.

• Slide a support tube into the plastic glider support. Push the support
bar through the second plastic slider support.

• Repeat with the second support tube.

4

G6

Support Tube

• Locate the four G6 screws and the base legs.

• With the open end up, line the bottom holes up with the two sup­port tubes and plastic glider supports.

• Insert the G6 screw and hand tighten.

• Align the other bottom hole on the base leg with the other support
tube and plastic glider support.

• Insert the other G6 screw and hand tighten.

• Using the screw driver provided, tighten the two screws.

•Repeat for other support tube.

4

Plastic Slider

Support

www.DeltaChildrensProducts.com