Delta 2522-MPU, 2520-MPU User Manual
2500
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
®
®
U
P
C
2520
2520-MPU
2502
2522
2522-MPU
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
3 7/16"
87 mm)
2"
51 mm)
(
(
2 7/8"
73 mm)
(
15/16"
1
(49 mm)
3/8"
1
(35 mm)
1/2"-14 NPSM
2 7/8"
73 mm)
(
" Centers
4
(102 mm)
"
6
(152 mm)
3/8" (35 mm)
1
Max. Deck
Thickness
ptional Chain
O
Stopper RP7584
on 2500/2502
LAVATORY
FAUCETS
■ Classic Series
■ Two Handle Deck Mount
■ 2 and 3 Hole Sink Applications
■ 4" Centerset
STANDARD SPECIFICATIONS:
• Solid brass fabricated body.
• 4" (102 mm) centerset.
• 3 7/16" (87 mm) long spout.
• Hot and cold stems are interchangeable.
• Control mechanism is the rotating cylinder type with
stainless steel plate and 180° rotation, with
replaceable non-metallic seats operating in stainless
steel lined sockets
• 1/2"-14 NPSM threaded male inlet shanks.
• Models with Snap-N-Pop-Up
polypropylene pop-up type fitting with plated
flange and stopper.
• Models with suffix “MPU” have metal drain have pop-
up type fitting with plated flange and stopper.
• Maximum flow rate 1.5 gpm @ 60 PSI.
.
®
drain have
3 3/8"
(86 mm)
4 5/8"
(118 mm)
2 1/8"
(54 mm)
Dia.
1 5/8"
(42 mm)
to
2 3/8"
(61 mm)
(35 mm)
1 1/4" (32 mm) Dia.
1 3/8"
Dia.
1 1/4" (32 mm) Dia.
1 5/8"
(42 mm)
to
2 3/8"
(61 mm)
2 1/8"
(54 mm)
Dia.
4 1/4"
(108 mm)
5 5/8"
(143 mm)
WARRANTY
• Lifetime Faucet and Finish Limited Warranty to the
original consumer purchaser to be free from
defects in material and workmanship.
• 5 Year Limited Warranty for usage in all industrial,
commercial and business applications.
CCOOMMPPLLIIEESS WWIITTHH:
•
ASME A112 .18 .1 / CSA B125.1
•
ASME A112 .18 .2 / CSA B125.2
Indicates compliance to
ICC/ANSI A117.1
•
EPA Water Sense
•
ASTM F409 (for non-metallic drain)
:
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.specselect.com for finish options and product availability.
DSP-L-2500 Rev. C
55 E. 111th Street, Indianapolis, Indiana 46280
395 Matheson Blvd. E., Mississauga, ON L4Z 2H2
© 2008 Masco Corporation of Indiana
1.D.12
Loading...