Delphi SKYFi Guide

SKYFiTM Audio System

Installation

Operation Guide

&

This symbol is intended to
alert the user to the
presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.

Warning

To prevent fire or shock hazard, do not expose the boom box to rain or moisture.

This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to
alert the user to the
presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.

For customers in the United States

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must a ccept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Delphi could void the user’s authority to operate this
equipment.

Owner’s Record

The model number is located at the bottom and the serial number is located on the label on the re ar of
the Audio System.
Record the serial number in the spa ce provided below. Refer to these numbers whenever you call upon
your dealer regarding this product.

Model No.: DELPHI SA10001 Serial No.____________________

Table of contents

 SKYFi

 Antenna Set-Up……………......................…….........…...….….6

 Using the SKYFi

 Precautions………….. …………………………...….…..……...10

 Troubleshooting…………………………………....……..……...11

 Maintenance……………………………………...………..….....11

 Specifications……………….………………………...….……...12

TM

Audio System Set-Up……….…………….......…….….4

TM

Audio System………..………..…..…...……8

3

SKYFiTM Audio System Set-Up

Your SKYFiTM Audio System Kit contains the following components:

12V. DC Adaptor

Battery compartment and

12V. DC jack

antenna cable storage

Set-up your SKYFi

TM

Audio System a s f ollows:

1. Connect the supplied 12V
DC power adapter to the
socket on the rear of the Audio
System, and the other end to a
wall outlet.

2. Connect the XM Antenna to the antenna jack located
inside the battery and antenna cable storage compart­ment located on the bottom of the Audio System. The
cover must first be removed by pressing down on the
two tabs with your thumbs and then sliding away from
the front of the Audio System. The antenna cable can
either be completely wound around the tabs in the
compartment, leaving just enough cable to attach

the antenna to the four tabs on the back
of the Audio System, or the entire 20 foot
cable can be used to position the

4

antenna away from the Audio System for
better reception. Lining up all six tabs and
then sliding the panel towards the front of
the unit until a click is heard will reatta ch
the panel. Ma ke certain that all six tabs
are engaged and the rear of the panel is
aligned with the rear cover.

Antenna