&
Delphi Audio System
Installation
Operation Guide
Warning: To prevent fire or shock hazard, do not expose the Delphi Audio System to rain, moisture, or water.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury
or death.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with Canadian ICES-003.
The Delphi XM® SKYFi2™ and roadyXT™ Satellite Radio Receiver each incorporate an FM transmitter and are
thereby classified as intentional transmitters. Changes or modifications not expressly approved by Delphi
could void your authority to operate this equipment.
Warning: The FCC and FAA have not certified the SKYFi, SKYFi2, or roadyXT for use in any aircraft
(neither portable nor permanent installation). Use of these devices in an aircraft could interfere with the
aircraft navigation or communication devices and result in an accident including fatal injuries and/or
property damage.
Owner’s Record
The model number is located below and the serial number is located on the label on the rear of the Delphi
Audio System.
Record the serial number in the space provided below. Refer to these numbers whenever you call upon
your dealer regarding this product.
Model No.: DELPHI SA10201 Serial No.:
2
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up the Delphi Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using SKYFi/SKYFi2 with the Delphi Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using roadyXT with the Delphi Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the Delphi Audio System with Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting up the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Positioning the XM Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Optimizing Antenna Position/Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the XM Antenna on the Rear of the Delphi Audio System . . . . . . . . . . . . . . . . . . . . . 7
Indoor Installation on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Outdoor Installation or Indoor Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Delphi Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Bass & Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
Table of Contents
Your Delphi Audio System Kit contains the following components:
Set up your Delphi Audio System by
following these steps:
1. Connect the supplied 12V DC power
adaptor to the jack on the rear of
the Delphi Audio System, and the
other end to a wall outlet.
2. Connect the XM Antenna to the
antenna jack located inside the battery compartment and antenna
cable storage located on the bottom of the Delphi
Audio System. The cover must first be removed
by pressing down on the two tabs with your
thumbs and then sliding it away from the front of
the Delphi Audio System. The antenna cable can
either be completely wound around the two cable
hooks in the compartment, leaving just enough
cable to attach the antenna to the four tabs on
the back of the Delphi Audio System, or the
entire 20' cable can be used to position the
antenna away from the Delphi Audio System for
better reception. To reattach the panel, line up
all six tabs and then slide the panel toward the
front of the unit until a click is heard. Make certain that all six tabs are engaged and the rear of
the panel is aligned with the rear cover.
Battery compartment and
antenna cable storage
12V DC jack
12V DC adaptor
XM Antenna
What’s in the Box
Setting up the Delphi Audio System
4