DELPHI SA10175, SA10176, SA10178 User Manual

Delphi Corporation

1441 West Long Lake Road

Troy, Michigan 48098-5090

U.S.A.

Customer Service: [1] 877.GO DELPHI

www.delphi.com

Printed on Recycled Paper

DPSS-06-E-059

roadyXT, the XM name, TuneSelect, and related

logos are trademarks of XM Satellite Radio Inc.

Using roadyXT at home*

Turn off your roadyXT and your home stereo. Connect your roadyXT to your stereo as illustrated.

Place the antenna

on a window or an

exterior wall so that it points south.

Turn on your roadyXT.

To help aim the antenna, use roadyXT’s “Antenna Aiming” feature.

Press the “menu” button. Use the arrow and “select” buttons to choose “Antenna Aiming.” This feature is most helpful when using the roadyXT in a stationary home or office environment.

Slowly turn and tilt the antenna. The signal bars on the display will change. Find the position that gives at least two bars on either “satellite” or “terrestrial.”

The antenna aiming screen remains as long as it’s needed to help you position the antenna. When you’ve found the best position, press the “menu” button twice to return to normal operation.

*With roadyXT Home Kit, (model SA10176, sold separately).

Mounting roadyXT in your vehicle

We’ve included two types of mounts to help you install your roadyXT in your vehicle’s interior.

Swivel Mount

Find a suitable location; the mount uses a strong adhesive and you’ll have difficulty repositioning it after installation. Do not install this mount on a leather surface. Make sure the air temperature is at least 60°F.

Clean the mounting surface with the surface preparation cleaning kit, following the directions on the package.

Peel away the adhesive liner and firmly press the swivel mount to the surface for 30 seconds. For best results, do not touch or apply any pressure to the vehicle mount for 24 hours.

To remove the mount, lift the adhesive pad with your fingers or a spoon. You may warm it with a hair dryer for 2 to 3 minutes to help soften the adhesive. Remove any leftover adhesive from the dash surface by rubbing with your finger, or use a mild cleaner as recommended by your vehicle’s manufacturer.

You can adjust the tension of the swivel mount by using a screwdriver.

Base of mount can be rotated to accommodate vertical or horizontal surfaces. Choose the best for your installation.

Caution: Never use a commercial heat gun or paint-stripping gun. This could result in damage to the unit or to your vehicle.

Warning: roadyXT should be placed in your vehicle where it will not interfere with the function of safety features (e.g., deployment of airbags). Failure to correctly place roadyXT may result in death and/or injury to yourself or to others if the unit becomes detached during an accident and/or obstructs the deployment of an airbag.

Vent Mount

Find a horizontal air vent that is strong enough to hold your roadyXT and its cradle. Clip the vent mount into the vent. To remove the mount, push it into the vent and lift upward slightly to release the mount’s hooks from the vent vanes. Carefully extract the mount.

Insert your roadyXT receiver into the vehicle cradle.

Attach the power, antenna, and audio cable (if needed). Tuck the cables under the plastic tab.

FCC ID: RS2SA10177A

Please note that the cables and antenna wire that have been supplied with your device are supplied with permanently attached

ferrite beads. It is the responsibility of the user to use the cable and antenna wire with the ferrite beads.

The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio, Inc. can void the user’s

authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Warning: The FCC and FAA have not certified the Delphi XM roadyXT Satellite Radio Receiver for use in any aircraft (nei-

ther portable nor permanent installation). Therefore, Delphi cannot support this type of application or installation.

This is the safety alert symbol. It is used to alert you to potential personal

injury hazards. Obey all safety messages that follow this symbol to avoid

possible injury or death.

Do more

• Save favorite channels as presets, which you can instantly recall by pushing just one button.

• Save and recall the artist names and titles of your favorite songs.

• Use TuneSelect™to find your favorite songs when they play on any XM channel.

• Create a personal stock ticker.

• View sports scores, news, and more.

Check out your roadyXT User Guide for more information.

Activating your roadyXT

Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346). You will need the XM Radio ID and a major credit card.

XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but may take up to an hour during peak busy periods.

When you can access the full channel lineup on your roadyXT, you’re done!

Press the arrow buttons to find channel 0. Push the “select” button to choose it.

You’ll see an 8character XM Radio ID in the display.

(The XM Radio ID does not use the letters I, O, S, and F.)

Using roadyXT in your vehicle

Because every vehicle is different, we can only provide some general guidelines. If you need help, consult a professional installer.

• Decide which method (cassette adapter, wired connection, or wireless FM transmitter) is best for your vehicle and location.

• Always do a trial run before installing anything permanently. Temporarily connect all power, audio, and antenna lines. Make sure that you receive the XM signal and that you hear XM programming through your vehicle’s audio system.

Audio quality

Placing the antenna

XM recommends the antenna be placed on the roof either:

• In front of the rear window (option 1)

• Behind the windshield (option 2)

For best performance, make sure the antenna has an unobstructed view of the open sky and is surrounded by a minimum of 3 to 6 inches of metal.

option 1

Warning: Failure to properly install the antenna may result in injury to yourself or to others if it becomes detached during an accident.

Controls

Display

Use the CASSETTE ADAPTER if your vehicle’s audio system has a built-in cassette player.

For a neat, fully integrated installation, use the DELPHI FM DIRECT ADAPTER (model SA10112, sold separately). The FM Direct Adapter must be connected to your car radio and to the car’s FM antenna. We recommend that you consult a professional installer.

The WIRELESS FM TRANSMITTER is the easiest and quickest way to hear XM programming in your vehicle. Simply set your FM radio and your roadyXT to the same frequency.

disp – change

what you see on the display

up and down arrows, select – change chan-

nels, choose menu options, TuneSelect

™

jump – return to previous channel; press and hold to select one of the last six FM frequencies used for the transmitter

numbers – enter a channel directly or select favorite presets

menu – access advanced features and configuration options

pre/dir – select between direct channel entry or up to 30 presets

search – look up channels by category or scan all channels

memory – save and recall up to 20 artist names or song titles

power

signal strength –

1 to 3 bars

search by scanning all channels

display modes 1-5

search channels by category

channel selection mode – direct

entry or preset banks A, B, or C

additional info – channel name, channel number, artist, song title, Stock Ticker, and Info Extras

TIP: If using option 1 and routing the antenna cable through the trunk seal, use the lowest part of the weather seal. This should minimize any water leaks.

TIP: For best results when using your roadyXT’s wireless FM transmitter, mount the XM antenna as close to your vehicle’s FM antenna as possible. The FM antenna may be a wire or metallic strip embedded in the windshield or rear window.

TIP: Don’t install the XM antenna inside your vehicle or on a non-metallic surface. Doing so will likely degrade the signal and you will probably experience more signal interruptions.

option 2

vehicle vent

mount

What’s in the box?

cassette adapter

vehicle swivel

mount

vehicle antenna

roadyXT

receiver

vehicle cradle

vehicle power

adapter

surface

preparation kit

home power

adapter

audio cables

roadyXT

Home Kit:

sold separately.

(SA10176)

home antenna

remote

Remember to pull out the clear plastic tab from the remote battery compartment before using the remote.

To remove the battery from the remote, use your thumb to press the center of the battery tray and pull it out. Replace the battery with the equivalent size and voltage, taking care to insert it with the positive (+) side up.

up and down arrows, select – change channels, choose menu options, TuneSelect

power

search – look up

channels by category or scan all channels

pre/dir – select between direct channel entry or up to 30 presets

display – change what you see on the display; show artist name, song title, channel number, Stock Ticker, or Info Extras

menu – access advanced features and configuration options

+ and - – change channels, or control volume if roadyXT is placed in an audio system

jump – return to previous channel; press and hold to select one of the last six FM frequencies used for the modulator

numbers – enter a channel directly or select favorite presets

memory – save and recall up to 20 artist names or song titles

Remote control*

*Sold separately.

Additional Vehicle Kits sold separately (SA10178)

home cradle

Important: See your roadyXT User Guide for important

FCC information.

TIP: If using option 2 and routing the cable along the door jamb, use the weather seal near the bottom of the door to minimize water leaks.