SA10085
Quick
Guide
Satellite
Radio
Receiver
Important: This manual contains important safety and operating information.
Please read and follow the instructions in this manual. Failure to do so could result
in personal injury, death, and/or damage to your Roady2 and/or to your vehicle.
Display sets one of four different display options.
Power turns unit
on and off manually.
Memory saves song
information. Press to
save song information;
press and hold for 3
seconds to retrieve
song information.
Menu contains 10
options (11 when in
FM mode). Press to
enter menu; use the
Tuning Wheelto scroll
through options and
make selections..
See your Roady2™User Guide for additional operating,
installation, and safety information.
Preset/Direct scrolls
through three preset
banks (A, B, and C)
and Direct Entry.
Category scrolls
through XM
®
categories such
as Rock, Country,
News, etc. Use the
Tuning Wheel to
scroll within each
category.
Tuning Wheel
scrolls through
channels, menu
options, and
channels within categories.
Press Tuning Wheel
in
make selection; press in and
hold for 3 seconds to place a
song on your TuneSelect list.
Number Keys go directly
to a channel when in Direct
Entry Mode or to save (press
and hold) and access presets
when in preset bank A, B, or C.
to
Some Other Features to Know About…
Basic Channel Selection
Press the Preset/Direct button until “Direct Entry” displays, then:
• Use Number Keys: Press the number keys in the bottom row to enter a channel
number, for example
• Use the Tuning Wheel: Turn the Tuning Wheel on the corner of your Delphi XM
Roady2 to increase or decrease channel number; then press it into select that channel.
Presets
Your Delphi XM Roady2 has three banks of presets: A, B, and C. Each bank of presets
can hold up to 10 channels.
To set a preset, first go to the channel you want to set as a preset—make sure that it
is playing. Then choose a preset bank where you wish to store it (use the
Preset/Direct button). Then, press and hold (for 2 seconds) the number key you wish
to use for that channel. The radio will beep once and display the preset number that
has been set.
To choose a preset channel, make sure you are in the right preset bank. (Press the
Preset/Direct button until Preset A, Preset B, or Preset C appears.) Then, press the
number key for the preset channel you wish to play.
Menu
The menu in your Delphi XM Roady2 lets you change the colors and contrast of the
display, set the FM frequency, set the audio level, optimally position a home antenna,
recall stored song titles and artist names, erase song titles from your TuneSelect
enter and delete stock symbols from the stock ticker, activate or turn off Direct Tune,
change your Auto-On and Auto-Off settings, and restore your unit to the factory
default settings. See your Delphi XM Roady2 User Guide for an explanation of these
features.
Warning: When using this product it is always important to keep your eyes on the road and your
hands on the wheel. Not doing so could result in injury to you or to others or in property damage.
5 then 0
for channel 50 or
1 then 2 then 1
for channel 121.
™
list,
To access the menu, press the Menu button, then use the Tuning Wheel to move the
cursor (press in to select an option). You can back up within the menu by pressing the
Menu button. The menu times out and returns to the normal display after approximately 8 seconds if you do not move the cursor or make any choices.
TuneSelect
TuneSelect notifies you when a favorite song is playing on a channel other than the
one where you are currently tuned.
To store a song title in TuneSelect, press and hold the Tuning Wheel in for 2 seconds
while listening to a song that you want to put on your TuneSelect list. The radio will
beep once and display “Song Selected.”
Later, when any song on your list is playing on another channel, the radio will beep
once and display the song name. Press the Tuning Wheel in to go to the channel where
the song is playing. You can use the menu to erase songs from your TuneSelect list.
Stock Ticker
You can track the performance of up to 20 stocks with your Delphi XM Roady2 receiver.
Use the menu to select specific stocks and then use the display key to select display
mode 4 in order to view the ticker.
FM Modulator
The Roady2 wireless FM modulator is automatically turned on whenever the Roady2
is turned on without a connector attached to the audio-in jack on the side. Select “FM
Frequency” in the menu to set a specific frequency.
The Roady2 name, XM name, and related logos are trademarks of XM Satellite Radio Inc.
Printed on Recycled Paper
©2004 Delphi Corporation. All rights reserved.
DPSS-04-E-031
Loading...