Delphi SA10085 User Manual
SA10085
User
Guide
Satellite
Radio
Receiver
Important: This manual contains important safety and operating information.
Please read and follow the instructions in this manual. Failure to do so could result
in personal injury, death, and/or damage to your Roady2 and/or to your vehicle.
FCC ID: RS2SA10085
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
IMPORTANT: The FCC and FAA have not certified the
Delphi XM Roady2 Satellite Radio Receiver for use in any
aircraft (neither portable nor permanent installation).
Therefore, Delphi cannot support this type of application
or installation.
Welcome
Thank you for purchasing a Delphi XM®Roady2™Satellite Radio Receiver.
Your Roady2 gives you access to over 120 XM Satellite Radio channels of
music, news, and information from coast-to-coast.*
Your Roady2 must be used with the enclosed connecting devices (or
other approved accessories) to ensure maximum performance and safety.
*XM subscription required for reception. Not available in Alaska or Hawaii.
3
Caution: Do not modify or alter wires or connections in any way. Shortening wires or
connections may prevent proper functioning of the pr
damage your receiver and will void your warranty.
otection cir
cuit. Doing so may
4
About Roady
Roady2 is the latest in the acclaimed line of portable devices from Delphi and
XM Satellite Radio and represents the best in audio technology. The smallest
and lightest satellite radio receiver currently available, Roady2 is always ready
to go with you. Just plug it in and go! Roady2 now contains an integrated
wireless FM modulator (that lets you play XM through an empty frequency on
the FM dial of your car or home radio) for the ultimate in convenience, and a
stock ticker that will let you track up to 20 of your favorite stocks while listening
to any XM channel.
About Delphi
Delphi is a worldwide leader in mobile electronics and transportation
components of audio technology. Delphi created the first in-dash car radio
decades ago, and is responsible for many audio innovations through the
years. Now Delphi technology has helped make satellite radio a reality,
and Delphi continues to expand its in-vehicle and consumer electronics
technologies. Delphi has a broad portfolio of products to answer a wide
variety of information and entertainment needs.
About XM
One big idea can change everything. And XM Satellite Radio is one big idea:
Radio to the Power of X®. America’s most popular satellite radio service offers
over 120 digital channels of sheer variety: music, sports, talk, comedy, drama,
news, traffic and weather, kids programming, and more. All 68 XM music
channels are 100 percent commercial-free, and XM’s instant traffic and weather
channels provide the most comprehensive, in-depth information on traffic
incidents, delays, and road conditions available on radio. These services are
available for a low monthly subscription, and additional devices may qualify
for a reduced subscription fee through the XM Family Plan.
Contents
Section 1
Getting Started: Activating
Roady2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Section 2
Roady2 Receiver
Roady2 Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Roady2 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Section 3
Basic Operations
Turning Roady2 On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Basic Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Changing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Save and Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Section 4
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Section 5
Installation
Roady2 Kit Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Roady2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
XM Antenna Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Section 6
Reference
Taking Care of Your Roady2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Contacting Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Section 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
5
6
Section 1
Getting Started: Activating Roady2
To quickly begin enjoying Delphi XM Satellite Radio, follow these simple steps :
1. Set up your Roady2 using the installation instructions in Section 5 of this
guide (see page 17) or with the help of a professional installer.
2. Press the power button to turn your Roady2 on and verify that it is
playing Channel 1, the XM Preview Channel.
3. Select Channel 0. The receiver’s eight-character XM Satellite Radio ID
number will appear on the display. Write the number here:
Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used.
4. Activate your XM Satellite Radio service. To subscribe, make sure you
have a major credit card and your XM Satellite Radio ID number
handy and contact XM at http://activate.xmradio.com. You can also
activate your service by calling 1-800-852-9696.
Note: You will need to keep your Roady2 on for at least one hour after activation and installation to
receive the full channel lineup.
Warning: When using this product it is always
important to keep your eyes on the road and your hands
on the wheel. Not doing so could result in injury to you
or to others or in property damage.
Caution: Failure to properly follow all installation instructions may result
in perso nal injury or damage to your Roady2
or to your vehicle.
Roady2 Receiver
Roady2 Display Screen
While tuned to an XM channel, the Roady2 default display contains
information about that channel and the Roady2 settings. See figure 1.
Signal-strength indicator
(zero to three bars)
Channel name
and number
Artist name
Display mode
indicator
Category search
indicator
Direct/preset mode (Direct, Preset A,
Preset B, or Preset C)
Figure 1. Roady2 display.
7
Section 2
Roady2 Controls
Power button
Number keys
Control keys
Category search
Infrared lens
e 2. Roady2 contr
Figur
Tuning Wheel
(inset on corner
of unit)
ols.
display
menu
category
preset/direct
1
memory
8
Section 2
The Roady2 unit has seven function buttons, a Tuning Wheel, and 10 number keys.
Turns the Roady2 on or off.
The display button toggles between four display options:
1. Channel name, channel number, artist name
2. Channel name, channel number, song title
3. Artist name, song title
4. Artist name, stock ticker
Press Memory to save artist name and song title information. Press
and hold memory key to recall information (or access this information from “Memory Recall” in the menu).
Press Menu to select and change receiver configuration options.
Pressing Menu when in menu mode will allow the user to back out
to the previous level.
Switches between Direct Entry, Preset A, Preset B, and Preset C.
Enters category search and displays channels grouped by category.
Continued presses step through available categories. Use the
Tuning Wheel to scroll through channels within a category; press
the Tuning Wheel
in to select a channel. Category search times out
after approximately 8 seconds if no channels are selected.
Use the Tuning Wheel to scroll through channel or menu options.
Pressing the Tuning Wheel
in selects a channel or menu option.
Number keys are used to select a channel directly (when in Direct
Entry mode), and to select or set presets when in a Preset mode.
Basic Operations
preset/direct
preset/direct
preset/direct
Turning Roady2 On and Off
Press on the Roady2. When first turned on, the receiver will
automatically tune in to the last channel listened to and recall the
previous settings.
Basic Channel Selection
Select a channel by number
1. Make sure that Roady2 is in Direct Entry mode. “Direct” should appear in the
upper right corner of the display. If A, B, or C appears, press until the
display says “Direct.”
2. Enter channel number using the number keys,
Set/select channel presets
Your Roady2 can store up to 30 preset channels. They are organized into
three different groups (Preset A, Preset B, and Preset C), each with 10
channels corresponding to the 10 number keys. For the tenth preset in
each group, press the “0” key.
Selecting channel presets
Press until an A, B, or C appears in the upper right corner of the
display. Press the number key corresponding to the desired preset.
Setting channel presets
1. Tune in the channel you want to register as a preset, making sure it is playing.
2. Select either Preset A, Preset B, or Preset C by pressing until an A,
B, or C appears in the upper right corner of the display.
Warning: When using this product it is always important to keep your eyes on the road and your
hands on the wheel. Not doing so could result in injury to you or to others or in property damage.
i.e., 5 then 0 for Channel 50.
9
Section 3
10
category
category
Section 3
3. Press and hold the number key corresponding to the preset you would
like to set. The receiver will beep to indicate that the preset is registered.
4. When you first get Roady2, all presets go to Channel 1.
Preview and select channels using the Tuning Wheel
You can use your Roady2 to preview the XM channel lineup, see what
is currently playing, and then decide if you want to leave your current channel.
1. Turn the Tuning Wheel repeatedly (hold to move quickly) to scroll
through the channel lineup.
2. Select a channel by pressing the Tuning Wheel
in. If you do not select
a channel, the display will time out and return to the channel you are
listening to.
Tune to a channel using the Tuning Wheel (option)
Preview mode can be disabled, allowing you to tune up and down the channel
list using the Tuning Wheel without having to take the separate step of
pressing it
in to select a channel. To activate this mode, go to the “Direct Tune”
option in the menu section and turn Direct Tune on.
Select a channel by category
Press either of the category keys to enter category search.
1. Continue pressing one of the category keys until a category you
are interested in appears.
2. Use the Tuning Wheel to scroll through channels within each category.
3. Press the Tuning Wheel
in to select a channel.
4. If you do not select a channel, category search will time out after several
seconds.
Warning: When using this product it is always important to keep your eyes on the road and your
hands on the wheel. Not doing so could result in injury to you or to others or in property damage.
Loading...