Delphi SA10069 Install Guide

8816DM Roady Card Keys 6/25/04 8:06 AM Page 1

XM Satellite Radio Accessory Products Limited Consumer Warranty

Delphi Product and Service Solutions (“Delphi”) warrants all Portable XM Satellite Radio Accessory Products sold by Delphi (“Products”) to be free of

defects in material and workmanship, subject to the following conditions: The duration of Delphi’s warranty with respect to Delphi Portable XM

Satellite Radio Accessory Products is limited to one (1) year from the date of sale to the original consumer purchaser. No other express warranties are

made with respect to any Product. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited to

the warranty period set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product. Delphi will, as

its sole obligation under this warranty, replace or repair, at its option, any Product that does not conform to this warranty. Products may be repaired or

replaced with new or with refurbished items. This limited warranty does not cover defects in appearance, cosmetic, or decorative items, including any

non-operative parts. Under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied

warranties. These remedies are the customer’s exclusive remedies for breach of warranty. This limited warranty only extends to customers who purchase

the Products in the United States. Delphi will not be responsible for damage resulting from any (i) deviation from Delphi’s operating instructions as

printed in Delphi’s catalog or on any packaging, labels, or other literature provided with a Product, (ii) installation of a Product in a manner which is

inconsistent with Delphi’s written instructions, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, (viii) normal

wear and tear, (ix) commercial use, (x) improper storage, (xi) environmental conditions, including excessive temperature or humidity, (xii) service by

anyone other than a Delphi authorized repair facility, (xiii) other improper application, installation or operation of the Product, or (xiv) defects or

malfunctions of which Delphi is not advised within ten (10) days of the expiration of the limited warranty period. How you (the Customer) can get

service: To obtain warranty service, you must return the defective Product with the original receipt to the original place of purchase. If further clarification

or additional information is required from Delphi, you may call Delphi at: 1.877.GO DELPHI (1.877.463.3574). If warranty service is needed at any time

during the warranty period, the purchaser will be required to furnish a sales receipt/proof of purchase indicating the date of purchase, amount paid,

and place of purchase. Customers who fail to provide such proof of purchase will be charged for the repair/replacement of any Product. How state

law relates to the warranty: Some states do not allow limitations on how long implied warranties last, or the exclusion or the limitation of incidental

or consequential damages. So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also

have other rights that may vary from state to state. NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO THIS LIMITED WARRANTY.

Delphi Corporation
1441 West Long Lake Road • Troy, Michigan 48098-5090 U.S.A.
Customer Service: [1] 877.GO DELPHI

www.delphi.com

The Roady name, Roady2 name, XM name, and related
logos are trademarks of XM Satellite Radio Inc.

Printed on Recycled Paper
©2004 Delphi Corporation. All rights reserved.
DPSS-04-E-043

For Use With Roady™and Roady2™Satellite Radio Receivers

Warning: This guide and the user

guide that came with your Roady or Roady2

contain important safety and operating

information. Please read and follow the

instructions in these manuals. Failure to do

so could result in personal injury or damage

to your unit or property.

Roady Home Kit

Installation Guide

Roady Home Kit Set-up

Your Roady Home Kit contains the following components:

control

XM®High-gain
Home Antenna

Audio cable

Roady Home Stand

6V A/C power adaptor Remote

Figure 1. Roady Home Kit components.

Caution: Connect only
appropriate input devices to
the unit’s jacks. Connecting an
incorrect input device may
damage the system and/or any
external electronic device. It is
recommended that you use
only the A/C power adaptor
that came with your Roady
Home Kit. If you need to use a
different adaptor, it must be a
6V, 100mA DC adaptor and
must contain a unified polarity
type jack, identified by the

symbol.

Set up your Roady Home Kit as follows:

1. Connect the XM Home Antenna to
the jack labeled .

2. Connect the power adaptor to the
connector labeled “6V.”

3. Connect the ministereo (black
connector) end of the audio cable
to the jack labeled . Connect the
red and white connectors to the
input jacks of your audio equipment.
Or, connect a set of powered speakers
directly to your unit by plugging the
speakers’ cables directly into the

jack.

Figure 2. Connect components to your unit as shown.

8816DM Roady Card Keys 6/25/04 8:06 AM Page 2

Roady Home Stand Installation

Figure 3. Attach unit to the Roady Home Stand as shown.

1. Insert the unit into the Roady Home
Stand and press the power button.

2. If the display reads “ANTENNA,”
check that the antenna connection
is secure and completely pushed in.
Next, change channels (from 0 to 1
or from 1 to 0 if the receiver is not
authorized yet). If the “ANTENNA”
message remains, power down the
radio, unplug the antenna, and
look for any obvious damage. If no
damage is detected, reconnect the
antenna, turn the unit back on, and
change channels again. If the message
still appears, contact your retailer.

3. If the display reads “NO SIGNAL,”
your antenna needs to be reposi­tioned. See the next section for
more information.

XM Home Antenna Set-up

The position of your antenna must be
optimized to receive the strongest possible
signal and consistent, mute-free reception.
Your unit has a basic signal-strength
indicator visible at the top of the display
screen during normal listening. It has
from zero to three vertical bars; three
bars represent the strongest signal.

The supplied antenna is a high-gain
antenna that can receive XM’s signal
from one of XM’s satellites and/or,
depending on where you live, XM’s
terrestrial repeaters. For best results,
the antenna should be positioned near
a south-facing window or outdoors with
a clear view of the southeastern sky. In
some cases, it will be possible to
receive XM’s signal through standard
home walls or a roof.

You can install your antenna either indoors
or outdoors, following these steps:

Indoor installation on a flat surface

1. Set the antenna flat against its base
on a flat (horizontal) surface.

2. Turn the base of the antenna so that
the XM logo is facing south if you
are in the eastern half of the U.S., or
to the south/southeast if you are in
the western half.

3. If necessary, experiment with different
locations until you receive the
strongest signal.

Your antenna comes with 20 feet of
cable. If that is not sufficient to locate
the antenna where there is a strong XM
signal, purchase a 50-foot cable extension
(Delphi model number SA10006) from
your retailer. Up to two extensions can
be used together for up to 120 total
feet of cable.

Note: Using more than 120

feet may result in sugnal degredation.

Outdoor installation or
indoor wall mounting

The antenna can also be attached
vertically to an external or internal wall
if that is more convenient than placing it
on a horizontal surface.

1. Holding your antenna up, find a wall
location that provides a strong signal.
You can use an extension cord to
temporarily locate your Roady Home

3. Tilt the antenna fully back on the base,
place the antenna base on the four
screw heads with the antenna pivot
on tip, and pull down approximately
1/4 inch until the base is firmly
secured. Note that the XM logo will
be upside down when the antenna is
properly installed.

4. Tilt the antenna away from the wall/base
until the signal strength is optimized.

Stand outdoors while optimizing the
antenna location.

2. Attach four screws to the wall using the
screw-locator pattern in figure 4. Use
screws with head sizes small enough
to fit in the center of each of the four
holes but large enough not to pop
out of the elongated sections. Leave
1/8 inch of the screw shanks behind

Note: Do not cut the antenna cable and
attempt to splice it or attach alternative
connectors or cable. The cable and connectors
used in your Roady Home Kit are specially
chosen and attached at the factory to ensure
that they will work with XM’s unique frequency
band. Use an XM-approved extension kit
(Delphi model number SA10006) with your
unit. Failure to do so could damage the unit.

the heads sticking out of the wall.

Warning: Take note of all electrical wiring and heating ducts near where you are installing the antenna. Use extreme caution when cutting or

drilling around these areas. Always wear protective eyewear when using tools. If using a ladder, follow manufacturer’s instructions.

1.4 in. (35 mm)

1.6 in. (40 mm)

Figure 4.
Photocopy this
diagram of the
screw-locator
pattern on the
bottom of your
XM Antenna to
use as a template
for wall attachment.