Delphi Premium Sound System User Guide

Important: This manual contains impor tant safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injur y, death, and/or damage to your Delphi Premium Sound System, accessories, and/or to your vehicle or proper ty.

Premium Sound System

User Guide

(SKYFi3 receiver sold separately)

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Warning: To prevent ﬁre or shock hazard, do not expose the Delphi Premium Sound System to rain, moisture or water.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

This Class B apparatus complies with Canadian ICES-003.

The Delphi XM® SKYFi2® and RoadyXT® Satellite Radio Receiver each incorporate an FM transmitter and are thereby classiﬁed as intentional transmitters. Changes or modiﬁcations not expressly approved by Delphi could void your authority to operate this equipment.

Warning: The FCC and FAA have not certiﬁed the SKYFi3®, MyFi®, or

Roady XT® for use in any aircraft (neither portable nor permanent installation). Use of these devices in an aircraft could interfere with the aircraft navigation or communication devices and result in an accident including fatal injuries and/or property damage.

Attention: Do not place your sound system directly on or near credit cards or hard drives. This product contains powered magnetic speaker drivers that may impact, alter, destroy, and/or erase magnetic data storage.

Owner’s Record

The model number is located below and the serial number is located on the label on the rear of the Delphi Premium Sound System.

Record the serial number in the space provided below. Refer to these numbers whenever you call your dealer regarding this product.

Model No.: DELPHI SA10221

Serial No.: __________________________________________________

Delphi Premium Sound System Controls:

VOL

BASS VOL

volume down bass boost volume up

Need help?

Call us at 1.877.GO.DELPHI

Monday through Friday from 8:00 a.m. - 8:00 p.m. Eastern Time

Saturday and Sunday from 10:00 a.m. - 4 :00 p.m Eastern Time

Note: Extended seasonal hours may be available.

Thank you for purchasing the Delphi Premium Sound System. We’ve

designed many thoughtful features into this system to ensure that your

In the event that you have questions or trouble getting started with your

new system, please do not return to the store. Call us ﬁrst! We can help.

Technical Support is also available at www.shopdelphi.com/skyﬁ3support.

level of listening enjoyment is the very best it can be.

All features and functions are subject to change without notice.

Table of Contents

Contents

Welcome ............................................................... 3

About Delphi ........................................................3

Getting Started ....................................................4

What’s in the Box ................................................. 4

Setting up the System .........................................5

Installing the Cradle ............................................. 6

Power up the System ..........................................7

Using SKYFi3® .................................................... 8

Using MyFi® ..................................................... 10

Using Roady® XT .............................................. 12

Using Audiovox® XpressTM .............................14

Using Batteries ................................................... 16

Setting up the Antenna ....................................18

Optimizing Antenna Position/Signal ................ 18

Positioning the XM Antenna ............................. 19

Indoor Installation on a Flat Surface ................20

Outdoor Installation or

Indoor Wall Mounting .......................................20

Repeater Antenna ..............................................23

Using the Delphi Premium Sound System .....24

Volume ................................................................ 24

Bass Boost ..........................................................24

Headphones .......................................................24

Aux In .................................................................. 26

Other Things You Should Know.......................27

Precautions ......................................................... 27

Troubleshhooting...............................................28

Maintenance ....................................................... 29

Speciﬁcations .....................................................30

Warranty ............................................................. 31

Delphi Limited Consumer Warranty

United States of America ..................................31

Delphi Limited Consumer Warranty

Canada ................................................................33

Welcome

Thank you for purchasing the new Delphi Premium Sound System. You are just minutes away from being able to play more than 170 crystal clear channels of live XM® satellite radio on a precisely engineered speaker system.

Read the following pages to get started with your new Delphi Premium Sound System.

About Delphi

Delphi is a world leader in mobile electronics, vehicle components and audio technology. Delphi created the ﬁrst in-dash car radio in 1936 and continues its strong tradition of innovation in the audio industry. Delphi technology has helped make satellite radio a reality, and Delphi continues to expand its in-vehicle and consumer electronics technologies. With its exciting line of satellite radio products, Delphi offers a broad portfolio of products to answer a wide variety of information and entertainment needs—in the vehicle, home, ofﬁce, or virtually anywhere.

Getting Started

What’s In the Box

Your Delphi Premium Sound System Kit contains the following components:

Items in the box

1. Premium Sound System

2. Radio cradle inserts for Roady® XT, MyFi®, SKYFi3® and Audiovox® receivers

3. Repeater Antenna Bracket and mounting screws

4. 18 volt power supply with separate cord (not pictured)

5. User Guide (not pictured)

6. Satellite home antenna (included inside the Premium Sound System)

Getting Started

Setting Up the System

You can set up your Delphi Premium Sound System by following these steps:

1. Connect the supplied 18-volt DC power adaptor to the jack on the rear of the Delphi Premium Sound System. Plug the other end into the wall outlet. You may also use 8 “C” batteries (not included).

2. The XM Antenna is located under the top cover of the Delphi Premium Sound System. If needed (i.e. unit is placed away from a south facing window or you live in an area without XM terrestrial repeaters), lift the handle on the top of the unit and remove the cover to access the antenna and wire management area.

Remove the cover by pressing down on the two tabs with your thumbs and sliding the cover away from the front of the Delphi Premium Sound System. Be sure that the antenna is connected to the antenna jack located inside the antenna compartment on the top of the Delphi Premium Sound System.

You can wind the two cable hooks in the compartment, leaving just enough cable

Getting Started

to attach the antenna to the four tabs on the back of the Delphi Premium Sound System. Or you can extend the entire 20’ cable away from the system to improve reception.To reattach the top cover, line up all tabs and then slide the cover toward the front of the unit until a click is heard. Make certain that all tabs are engaged and the rear of the panel is aligned with the rear cover.

Installing the Radio Cradle

Before installing the cradles, be sure to choose the proper cradle from the options that are included in the package. The receiver name is printed on the bottom of each cradle insert.

Insert your satellite receiver (which is sold separately) into the cradle. Slide the receiver down into the cradle so that the radio lines up with the slots on the receiver and the connector is completely seated. The receiver can be removed by reversing this process.

Getting Started

Power Up the System

Use the power button on the receiver or on its remote control to turn on the receiver. If the display reads “ANTENNA” after powering up, check that the antenna connection is secure and completely pushed in. Next, change channels (from 0 to 1 or from 1 to 0 if the receiver is not authorized yet).

NOTE: Some receivers will power up automatically when installed in the Delphi Premium Sound System.

If the “ANTENNA” message remains, power down the radio, unplug the antenna and look for any obvious damage in the connector, jack or antenna cable. If no damage is detected, reconnect the antenna, turn the unit back on, and change channels again. If the message still appears, contact your retailer.

If the display reads “NO SIGNAL” after powering up, follow the instructions in “Setting up the Antenna” on page 5.

Getting Started

Using SKYFi3® with Delphi Premium Sound System

1. Install the SKYFi3 cradle insert onto the Delphi Premium Sound System. Insert the SKYFi3 receiver (sold separately) into the cradle insert included with the Delphi Premium Sound System until snug.

Caution: Do not use excessive force when inserting the receiver into the cradle. Doing so could cause damage to the unit.

2. Place the cradle insert containing the SKYFi3 into the cradle by first pressing in on the back of the black inset cradle in the Delphi Premium Sound System. Then let the cradle tilt forward, carefully slide the cradle insert down into the tray so that the alignment tabs on the sides of the tray line up with the slots on the cradle insert and the connector is completely seated. Push on the top center above the display of the cradle insert so that it tilts back into the Delphi Premium Sound System until a click is heard. The SKYFi3 Receiver adaptor can be removed by reversing this process.

3. Power up the system by using the power button on the receiver or on the remote control. If the display reads “ANTENNA” after powering up, check that the antenna connection is secure and completely pushed in. Next, change channels (from 0 to 1 or from 1 to 0 if the receiver is not activated yet). If the “ANTENNA” message remains, power down the radio, unplug the antenna, and look for any obvious damage in the connector, jack, or antenna cable. If no damage is detected, reconnect the antenna, turn the unit back on, and change channels again. If the message still appears, contact your retailer.

+ 28 hidden pages