Delonghi KF 8170H Instructions Manual

9

GENERAL WARNINGS

- After removing the packaging, make sure the
product is complete and undamaged. If in
doubt, do not use the appliance and contact a
qualified professional only.

- The plastic bag containing the product must not
be left within reach of children as it represents a
potential hazard.

- If the plug fitted to the appliance does not match
the power socket, have the socket replaced with
a suitable type by a qualified professional.
The use of adapters, multiple sockets and/or
extensions is not recommended. If their use is
unavoidable, only adapters, multiple sockets
and extensions complying with current safety
standards and regulations should be used,
taking care not to exceed the power limit indi­cated on the adapter and/or extension.

- Earthed models must be connected to an effi­cient earth connection as specified by current
electrical safety standards and regulations.

- In the event of malfunction, contact an authori­sed service centre only.

- The appliance must be used only for those pur­poses for which it was specifically designed.
Any other use is considered improper and thus
dangerous. The manufacturer is not liable for
damage caused by inappropriate, incorrect or
irresponsible use of the appliance and/or
repairs carried out by unqualified persons.

- Make sure that hands, hair, clothing and kitchen
utensils are clear of the container before starting
the appliance. The blades can cut. Handle with

care.
Special attention must be paid to the following
fundamental safety rules:

- NEVER use the blender empty.

- Never touch the appliance with wet or damp
hands.

- Never use the appliance with bare or damp
feet.

- Never unplug the appliance by pulling the
power cable.

- Protect the appliance from atmospheric agents
(rain, sun, frost, etc).

- The appliance is not intended for use by persons
(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.

- Unplug the appliance from the mains socket when
not in use.

- Never leave the appliance on unnecessarily, as it
is a potential source of danger.

- Never immerse the appliance in water.

- If the power cable is damaged, it must be repla­ced by the manufacturer or an authorised servi­ce centre to avoid all risk.

- Before cleaning or servicing, disconnect the
appliance by unplugging from the mains.

- If the appliance breaks down or malfunctions,
turn it off. Do not tamper.
For any repairs, contact an authorised service
centre only and insist on the use of original
spare parts and accessories.

- When the appliance is to be discarded, after
unplugging from the mains, cut the cable to
make the appliance unusable.

- Save these instructions carefully for future refe­rence.

- Never pour boiling hot liquids into the jar.

Materials and accessories coming into contact with
food conform to EC regulation 1935/2004.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.

At the end of its working life, the product must
not be disposed of as urban waste. It must be
taken to a special local authority differentiated
waste collection centre or to a dealer provi­ding this service. Disposing of a household
appliance separately avoids possible nega-

tive consequences for the environment and
health deriving from inappropriate disposal and enables
the constituent materials to be recovered to obtain signifi­cant savings in energy and resources.As a reminder of the
need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.

READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE

GB

10

DESCRIPTION
A. Measure
B. Lid
C. Glass jar
D. Motor base
E. ON/OFF slide and speed indicator
F. "P" pulse button

BEFORE USE

Before using the appliance for the first time, wash
all accessories thoroughly. Take care when handling
the blades as they are sharp. Wipe the motor base
with a damp cloth.

Never immerse the motor base in water!

Check that the mains supply voltage corresponds to
the voltage indicated on the rating plate.

HOW TO USE

• Place the appliance on a dry flat surface.
DO NOT PLUG THE APPLIANCE INTO THE
MAINS UNTIL ALL ACCESSORIES HAVE BEEN
CORRECTLY FITTED.

• Place the blender jar on the motor base.

• Pour the ingredients into the jar.
This may be done by:

1.Removing the entire lid (A+B) (fig.1)

2.Removing the measure (A) by rotating anti­clockwise (fig. 2).

Important:

Never use the appliance for more than 1 minute
consecutively. Pause for 4 minutes between one
cycle and the next and use for a maximum of five
cycles. The appliance must then be left to cool
down.

• Cut solid food into cubes and add water.

• Place the lid (B) on the jar.

• Plug into the mains.

•To start processing the ingredients, just move the
slide (E) to select the desired speed.

When the ingredients have reached the requi­red consistency, move the slide back to the (0)
position.

• Before cleaning, always unplug from the mains.

USING THE "P" FUNCTION

The "P" (pulse) function improves control for short
periods of processing.
Position the slide (E) in the "P" position and press
the button (F) intermittently until you have completed
processing.
The appliance functions while the (F) button is pressed.

CLEANING THE APPLIANCE
NEVER IMMERSE the motor base in water!

Make sure the appliance is unplugged from the
mains socket.

• Remains of the ingredients being processed
must be removed with a spatula.

• Half fill the blender jar with lukewarm water.
Operate the appliance for a few seconds then
empty the jar.

Repeat the operation if possible.

The blender jar and all plastic components
must not be washed in the dishwasher or in
boiling water.

•Take care when handling the glass jar to avoid
violent impact.

For more thorough cleaning, the base of the jar
can be removed by turning the ring on the bottom.

After cleaning, replace the base and screw on.

• Clean the motor base and power cable with a
damp cloth or sponge.

Dry thoroughly with a soft cloth.

•Wrap the power cable carefully around the bot­tom of the motor base.

TIPS
1 General

• Add the ingredients to the jar a little at a time for best
results and to avoid them overflowing.

• Do not fill the jar more than two thirds full. The move­ment of the blades will increase the volume of the
ingredients. Recipes using large quantities of ingre­dients should be processed in batches.

• Unless the recipe specifies otherwise, add liquid
ingredients before solid ingredients.
The liquid will facilitate processing and allow you to
use a slower speed. Always add a cup of water
before processing ice.