DeLonghi KF8150M User Manual
instructions
BLENDER KF8150M
Blender KF8150M
2
Description of Appliance
The following terms are used throughout the instruction manual
Measuring cup (with hole)
Measuring cup (with hole)
Lid
Fruit tray
Glass jar
Blade unit
Motor base
ON/OFF/P knob
Speed indicator
Fig.1
Fig.2
Fig.3
Blender KF8150
3
Thank you for choosing this De’Longhi Blender.To get the best
results from your new blender it is advisable to read these instructions carefully before using the appliance.This is the only way to
ensure optimum results and maximum safety.
Using for the first time
• Before using the appliance for the first time, wash all accessories thoroughly.Take care when handling the blades as they
are sharp.Wipe the motor base with a damp cloth
• Never immerse the motor base in water!
• Check that the mains supply voltage corresponds to the voltage
indicated on the rating plate.
Using the Blender
• Place the appliance on a dry flat surface.
DO NOT PLUG THE APPLIANCE INTO THE MAINS UNTIL
ALL ACCESSORIES HAVE BEEN CORRECTLY FITTED.
•Place the blender jar on the motor base.
•Pour the ingredients into the jar.
This may be done by:
1. Removing the entire lid by rotating anticlockwise;
2. using the lid without the measuring cup;
3. using the fruit tray inserted upside down in the hole in
the lid (fig. 1).
• The appliance is supplied with a handy measuring cup with a
useful hole for adding, for example, drops of flavouring or
essence without opening the lid (fig. 2). If you turn the measuring cup upside down and close the hole, it can also be used as a
measure for oil or similar. (see fig. 3).
Important:
Never use the appliance for more than 3 minutes consecutively.
Pause for 3 minutes and continue to use for a maximum of five
cycles. The appliance must then be left to cool down.
• Cut solid food into cubes and add water.
• Place the lid on the jar and rotate clockwise until the safety
device on the handle of the jar clicks into place.The blender
will not function if the lid is not correctly positioned on the jar.
• Plug into the mains.
•To start processing the ingredients, just turn the ON/OFF knob to
the desired speed (1/2/3).When the ingredients have reached the
required consistency, turn the knob back to the (0 ) position.
• On the "P" position, the blender operates at maximum speed,
improving control for short periods of processing.
• Before cleaning, always unplug from the mains.
Fig.4
Fig.5
Fig.6
Blender KF8150
4
Using the "P" function
The "P" (pulse) function improves control for short periods of
processing.
The appliance functions as long as the knob is kept in the "P"
position.
Cleaning the appliance
NEVER IMMERSE the motor base in water!
Make sure the appliance is unplugged from the mains socket.
• Remains of the ingredients being processed must be removed
with a spatula. In models with a plastic blender jar, use a rubber
spatula to avoid scratching the surface.
•Pour lukewarm water into the blender jar, filling to the halfway point.
Operate the appliance for a few seconds then empty the jar.
Repeat the operation if possible.
• Remove the blender jar, lid and measuring cup and wash in lukewarm water. Rinse and dry thoroughly.
•To facilitate cleaning, in certain models the blade unit can be
removed as follows:
1. Remove the jar from the base and turn it upside down.
2. Insert the hooks on the end of the measuring cup into the
notches on the bottom of the upturned jar (see fig. 4).
3. Turn the measuring cup clockwise (fig. 5) as far as it will go then
pull until the blade unit is released (fig. 6).
4. Wash, dry, then reassemble, taking care to replace the gasket
correctly. Position the blade unit on the bottom of the jar,
pressing down until it fits in place, then use the measuring cup
to rotate the blade unit anticlockwise as far as it will go.
The blender jar and all plastic components must not be washed
in the dishwasher or in boiling water.
•Take care when handling the glass jar to avoid violent impact.
• Clean the motor base and power cable with a damp cloth or
sponge.
Dry thoroughly with a soft cloth.
• Wrap the power cable carefully around the bottom of the
motor base.
Suggestions for use
1 General
• In order to get results and not risk that the ingredients spill out of
the blender jar, add the ingredients to the jug a little at a time.
• Do not fill the jar more than full – the movement of the blades
will increase the volume of the ingredients in the jug. The
recipes which use large quantities of ingredients should be
processed in batches.
Lock
Open
Loading...