Delonghi HFX85W20C Instruction manuals
DESCRIPTION
A ON/STANDBY button
B Lid release button
C Air purication lter
D Remote control
E Control panel
F Heating button
F1 Heating mode
G Temperature buttons
G1 Temperature indicator (C° and F°)
H ECO button
H1 ECO function
I Airow direction button
J Oscillation button
K Timer button
K1 Timer function
L Fan speed buttons
L1 Fan speed indicator
M Fan button
M1 Fan mode
N Hours
O Power indicator light
P Receiver for remote control
Increase button
Decrease button
Q Handle
R Air inlet
S Air outlet
OPERATION AND USE
Electrical connection
Before plugging the appliance into the outlet, check that
the power supply corresponds to the value indicated on the
rating plate and that the power supply is adequate for the
load.
Installation
The appliance can be used on any horizontal stable surface.
Do not overload the electrical circuit.
Avoid using the same socket for other appliances.
Please note: the appliance can be easily moved
carrying it by the handle. Before moving it remember to turn
it o.
Starting instructions
Please note: the lter is provided with a protective
wrapper around it that needs to be removed before rst use.
- Before turning on the appliance remove the lter from
its housing as explained in the lter maintenance
section.
- Remove the wrapper covering the lter (g.1).
g.1
- Replace the lter in its housing as explained in the lter
maintenance section.
- Connect the appliance to the power outlet.
- The appliance emits three beeps and the power
indicator light (O) also comes on and remains lit while
power to the appliance is on. The appliance goes into
STANDBY.
OPERATING MODES
Turn on the appliance
- Press/touch the ON/STANDBY button (A) to turn on the
appliance.
There are two buttons to select the operating modes of
the appliance: heating (F) and fan (M).
- To turn o the appliance press/touch button ON/
STANDBY (A). If unit has been in heat mode, expect
the display to count down for about 10 seconds before
the unit shuts o. After that, to completely turn o the
appliance, remove the plug from the socket.
Please note: never turn o the appliance by only
pulling the plug. Press/touch the ON/STANDBY button (A)
and wait a few minutes before pulling the plug. In this way
the appliance can perform operating status checks.
Air purication
The product is designed to oer constant air purication
from allergens and pollutants in heating and fan modes. The
purication function is NOT working when in the STANDBY
mode. If air purication is desired regardless of the need for
heating or cooling, it is advisable to set the product in fan
mode using ventilation levels 1 through 5.
Heating mode
- To select this operating mode, press the heating button
(F) on the remote control. The display shows the
11
symbol (F1); the temperature can be set by pressing
the temperature buttons ( or ) (G) on the remote
control.
At rst pressing, the display will show the current set-
point for approximately 4-5 seconds along with the
symbol; the temperature can be increased or decreased
by pressing button or respectively.
-
The minimum setting is 10°C and the maximum is 28°C .
- In this mode it is possible to increase or decrease the
fan speed by pressing the speed button or (L) on
remote control; the minimum fan speed available in
heating mode is 1, the maximum is 6.
- At rst pressing, the display will show the current fan
speed for approximately 4-5 seconds along with the
symbol.
Please note: the appliance will operate for few
seconds with a reduced airow to allow the preheating in
order to guarantee the best comfort.
Please note: When the set temperature is reached,
the appliance will automatically stop heating but could
keep working for a preset time at reduced airow speed. The
appliance will restart heating again, at the previous settings,
as long as needed to maintain the desired set temperature.
Examples: heating mode
- Press the speed button or (L) to increase or
decrease the fan speed.
ECO function
This function can be activated only with the heating operating
mode. To activate this function, press the ECO button (H) on
the remote control, the display shows . The appliance
will automatically set the power level to guarantee the best
comfort while reducing the energy consumption.
Fan mode
In this operating mode only the fan operates so the appliance
does not heat the room. This is ideal during summer days
because it moves air in a room, creating a pleasant breeze
instead of stale air.
- To select this operating mode, press the fan button
(M) on the remote control, the display shows the symbol
(M1).
- In fan mode 10 speeds are available. It's possible to
increase or decrease the fan speed by pressing the
speed button or (L) on the remote control. The
value changes one fan speed at a time.
- At rst pressing, the display will show the current fan
speed.
- Press heating button (F), the display shows .
- Press the temperature button or (G) to select
desired temperature.
Examples: fan mode
- Press fan button (M) , the display shows the symbol
.
12
Please note: while this funtion is active, if the timer
button is pressed one time, the remaining time will be shown
on the display.
Please note: if a power failure or power interruption
occurs, the timer function is reset and the appliance
automatically goes to STANDBY.
- Press the speed button or (L) to increase or
decrease the fan speed. The display will show the fan
speed you have selected.
TIMER operation
The timer can be used to delay appliance start up or
shutdown. This avoids wasting electricity by not operating
the appliance when it is not needed.
This function can be activated from any operating mode.
- DELAYED SWITCH-ON: with the appliance in the
STANDBY mode position, press the timer button (K)
on the remote control, the display shows the symbol
(K1) together with "h" (N). The time can be set pressing
the timer button repeatedly to select from the following
choices: 0.5h, 1h, 2h, 4h, 6h, 8h and 12h.
Once having set the desired time, it will remain in the
display for 4-5 seconds and then disappear.
When the programmed time has been reached, the
appliance automatically turns on with the same settings
it had during the previous operation.
Once the function has been set, if you want to go back to
operation without the timer, press the timer button (K)
twice rapidly. The timer symbol disappears from the
display.
- DELAYED SHUT-OFF: With the appliance ON, press the
timer button (K) on the remote control. The display
shows the symbol (K1) together with "h" (N). The
time can be set pressing the timer button repeatedly
to select from the following choices: 0.5h, 1h, 2h, 4h,
6h, 8h and 12h. Once having set the desired time, it
will automatically disappear after 4-5 seconds. When
the programmed time has been reached, the appliance
shuts o automatically.
Once the function has been set, if you want to go back to
operation without the timer, press the timer button (K)
twice rapidly. The timer symbol disappears from the
display.
Please note: if the ON/STANDBY button is pressed
while the timer function is active, the unit changes its status
(for example it goes to ON from STANDBY or vice versa) and
timer function will be deactivated.
Examples: timer function
- In heating mode press timer button till 6h appears
on display, press again to the desired value of 8h. The
selected time will disappear after 4-5 seconds if timer
button is not pushed again.
Oscillation button
If you want the appliance to distribute the airow over a
larger area, press the oscillation button (J) on remote control.
The appliance will then oscillate right and left.
To stop the oscillation in the desired position, just press
oscillation button (J) again.
Please note: while the timer is active, the operating
settings of the unit can still be modied.
Please note: never try to rotate the appliance
manually as you may damage the unit.
13
Loading...