Delonghi Active board ADS 3600 Instruction manuals

ASSE DA STIRO ATTIVA
ACTIVE IRONING BOARD
PLANCHE À REPASSER ACTIVE
AKTIV-BÜGELTISCH
ACTIEVE STRIJKPLANK
TABLA DE PLANCHAR ACTIVA
TÁBUA DE ENGOMAR ACTIVA

™π¢∂ƒø™∆ƒ∞ ATTIVA

Instructions for use
Instructions d'utilisation
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzingen
Instrucciones para el uso
Instruções para o uso

√‰ËÁ›Â˜ ¯Ú‹Û˘

ELECTRICAL CONNECTION (UK ONLY)

A) If your appliance comes fitted with a plug, it will incorporate a 13

Amp fuse. If it does not fit your socket, the plug should be cut off from
the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing
the fuse: do not insert in a 13 Amp socket elsewhere in the house
as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be
protected by a 15 Amp fuse.
If the plug is a moulded-on type, the fuse cover must be re-fitted
when changing the fuse using a 13 Amp Asta approved fuse to BS

1362. In the event of losing the fuse cover, the plug must NOT be
used until a replacement fuse cover can be obtained from your
nearest electrical dealer. The colour of the correct replacement fuse
cover is that as marked on the base of the plug.

B) If your appliance is not fitted with a plug, please follow the

instructions provided below:

WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the
following code:

WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the
following code:

Green and yellow: Earth
Blue: Neutral
Brown: Live

As the colours of the wires in the mains lead may not correspond with
the coloured markings identifying the terminals in your plug, proceed as
follows:
The green and yellow wire must be connected to the terminal in the plug
marked with the letter E or the earth symbol or coloured green or
green and yellow.
The blue wire must be connected to the terminal marked with the letter N
or coloured black.
The brown wire must be connected to the terminal marked with the letter
L or coloured red.

High
Temperature

OK

4

5