Delock USB 2.0 Camera Module 5.04 mega pixel 91° V5 fix focus
Description
This USB 2.0 camera module by Delock offers in a compact construction a high resolution and low power consumption. It is ideally suited for installation in industrial components like IPCs, embedded systems, sensors and in device manufacture. The use of a photosensitive sensor with back side illumination (BSI) expands the scope of this module.
Specification
•Connector:
1x 5 pin USB 2.0 pin header female SMT, pitch 1.00 mm
•Resolution: 5.4 megapixel
•With optical IR filter
•Standard SCCB interface (I²C Bus)
•Output support for RAW RGB, RGB565/555/444, CCIR656, YUV422/420, YCbCr422 and compression
•Maximum resolution: QSXGA (2592 x 1944)
•Automatic image control functions including:
Automatic exposure control (AEC)
Automatic white balance (AWB)
Automatic band filter (ABF)
Automatic black-level calibration (ABLC)
•Image quality controls including colour saturation, gamma, sharpness (edge enhancement), lens correction, white pixel canceling, noise canceling, and automatic 50 / 60 Hz luminance detection
•Supports scaling
•Power consumption:
Sensor suspend: 90 mA
sensor active: 140 mA ± 5 mA @ 640 x 480 Pixel
•Operating voltage: 5 V DC
•Operating temperature: 5 °C ~ 50 °C
•Operating humidity: ≤ 80 %
•Sensor size: 1/4"
•Sensitivity: 0.6 V / lx s
•Signal-to-noise ratio (SNR): ca. 36 dB
•Dynamic range: 69 dB
•Fix focus: 0.3 m - infinite
•Aperture: F/3.0
•Frame rates:
30 fps @ HVGA, VGA, XGA, 720p, QVGA
15 fps @ UXGA, 1080p, QXGA
7 fps @ 2592 x 1944
• Dimensions (LxWxH): ca. 60 x 8 x 12 mm
System requirements
•PC with UVC support
•Windows Vista/7/8.1/10
•DirectX 9.0c or above
•Linux Kernel 2.6.15 and above with Video4Linux
•Minimum CPU P4 1.4 GHz, 512 MB RAM
Item no. 96362
EAN: 4043619963621
Country of origin: China
Package:
Loading...