DeLOCK internal 20-Pin Key-B USB 3.1 on 2x USB-A 3.1 converter, adapter cable, 45cm User Manual
Delock Cable USB 3.1 Gen 2 key B 20 pin male > 2 x USB 3.1
Gen 2 Type-A female panel-mount 45 cm
Description
This cable by Delock can be connected to the internal USB
3.1 Gen 2 key B socket of a motherboard or a PCI Express
card and can be used to extend a USB connection. The
USB Type-A connectors can be attached with two screws,
e.g. on a slot bracket or a chassis with the corresponding
recess. In this way, it is possible to install two USB ports in
an easily accessible position.
Specification
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) key B 20 pin male 90° angled >
2 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female
• Two mounting holes for screws, spacing 48 mm, with M3 thread
• Cable gauge:
28 + 30 AWG data line
26 + 28 AWG power line
• Resistor: 5.1 kΩ
• Cable diameter: ca. 6 mm
• Data transfer rate up to:
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Length incl. connectors: ca. 45 cm
Item no. 85327
EAN: 4043619853274
Country of origin: China
Package: Poly bag
System requirements
• PC with a free USB 3.1 Gen 2 key B interface
Package content
• USB cable
Images
© 2019 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors,
changes and errors excepted.
www.delock.com
85327
1 / 2
19.09.2019
Interface
Connector 1: 1 x USB 3.1 Gen 2 key B 20 pin male
Connector 2: 2 x USB 3.1 Gen 2 Type-A female
Technical characteristics
Data transfer rate: SuperSpeed USB 10 Gbps
Resistor: 5.1 kΩ
Physical characteristics
Cable diameter: 6 mm
Conductor gauge: 28 AWG data line
30 AWG data line
26 AWG power line
28 AWG power line
Length: 45 cm
Powered by TCPDF (www.tcpdf.org)
© 2019 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors,
changes and errors excepted.
www.delock.com
85327
2 / 2
19.09.2019
Loading...