DeLOCK internal 20-Pin Key-A USB 3.1 to USB-C 3.1 converter, adapter cable, 0.7m User Manual
Delock Cable USB 3.1 Gen 2 key A 20 pin male > USB 3.1 Gen 2
Type-A female panel-mount 70 cm
Description
This cable by Delock can be connected to the internal USB
3.1 Gen 2 key A socket of a motherboard or a PCI Express
card (e.g. Delock 89603) and can be used to extend a
USB connection. The USB Type-A connector can be
attached with two screws, e.g. on a slot bracket or a
chassis with the corresponding recess. In this way, it is
possible to install a USB port in an easily accessible
position.
Specification
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) key A 20 pin male 90° angled >
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female
• Two mounting holes for screws, spacing 31 mm, with M3 thread
• Cable gauge:
28 + 30 AWG data line
26 + 28 AWG power line
• Resistor: 5.1 kΩ
• Cable diameter: ca. 6 mm
• Data transfer rate up to:
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Length incl. connectors: ca. 70 cm
Item no. 85325
EAN: 4043619853250
Country of origin: China
Package: Poly bag
System requirements
• PC with a free USB 3.1 Gen 2 key A interface
Package content
• USB cable
Images
© 2019 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors,
changes and errors excepted.
www.delock.com
85325
1 / 2
19.09.2019
Interface
Connector 1: 1 x USB 3.1 Gen 2 key A 20 pin male
Connector 2: 1 x USB 3.1 Gen 2 type-A female
Technical characteristics
Data transfer rate: SuperSpeed USB 10 Gbps
Resistor: 5.1 kΩ
Physical characteristics
Cable diameter: 6 mm
Conductor gauge: 28 AWG data line
30 AWG data line
26 AWG power line
28 AWG power line
Length: 70 cm
Powered by TCPDF (www.tcpdf.org)
© 2019 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors,
changes and errors excepted.
www.delock.com
85325
2 / 2
19.09.2019
Loading...