DELLA 048-GM-48196, 048-GM-48330 Instruction Manual

1

Commercial Ice Maker

Instruction Manual

Model: 048-GM-48196
048-GM-48330

To ensure proper use of this appliance and your safety, please read the following
instructions carefully before operating this appliance.

2

CONTENTS

IMPORTANT SAFETY-------------------------------------------------------------------------------------3
SPECIFICATION--------------------------------------------------------------------------------------------5
DIMENSION/CONNECTION---------------------------------------------------------------------5
RATING------------------------------------------------------------------------------------------------5
GENERAL INFORMATION-------------------------------------------------------------------------------6

MAIN UNIT CONSTRUCTION------------------------------------------------------------------------6
ICE-MAKING AND ITS WATER TANK PARTS----------------------------------------- -----6

CONTROL PANEL----------------------------------------------------------------------------------7
EXPLOSIVE DRAWING---------------------------------------------------------------------------8

OPERATING PROCEDURE AND MAINTENANCE-----------------------------------------------10

UNPACKING YOUR ICE MAKER-

------------------------------------------------------------------------10

INSTALLATION LOCATION REQUIREMENT------------------------------------------------10

ELECTRICAL REQUIREMENT & CONNECTIONS----------------------------------------11

CCLLEEAANNIINNGG YYOOUURR IICCEE MMAAKKEERR BBEEFFRROOEE FFIIRRSSTT UUSSIINNGG--------------------------------12

WATER CONNECTIONS FOR YOUR ICE-MAKER-----------------------------------------12

OPERATION YOUR UNIT--------------------------------------------------------------------------------13

OPERATION THE ICE MAKING PROCESS-------------------------------------------------13

AUTOMATIC SELF-CLEANING PROGRAM-------------------------------------------------14

OFF-TIMER AND ON-TIMER SETTING------------------------------------------------------14

WIRING DIAGRAM-----------------------------------------

----------------------------------------------15

NORMAL SOUNDS--------------------------------------------------------------------------------15

PREPARING ICE MAKER FOR LONG STORAGE----------------------------------------16

CLEAND AND MAINENANCE ------------------------------------------------------------------16
EXTERIOR CLEANING----------------------------------------------------------------------------17
INTERIOR CLEANING-----------------------------------------------------------------------------17
ICE MAKING PARTS CLEANING---------------------------------

-----------------------------------17

ICE MAKING ASSEMBLY SYSTEM CLEANING BY USING NU-CALGON NICKLE SAFE

ICE-MACHINE CLEANER ----------------------------------------------------------------------------------19

CLEANING SUGGESTION------------------------------------------------------------------------------------20

NORMAL TROUBLE SHOOTING-------------------------------------------------------------------------21

PRODUCT WARRANTY--------------------------------------------------- ----- ------- ---- ------ --22
CORRECT DISPOSAL OF THIS PRODUCT-------------------------------------------------22

3

IMPORTANT SAFETY

When using electrical appliances, basic safety precautions should be followed to
reduce the risk of fire, electric shock, and injury to persons or property. Read all
instructions before using any appliance.

Use this appliance only for its intended purpose as described in this owner’s manual.

This ice-maker must be properly installed in accordance with the installation instructions before it is
used.

This unit must be positioned so that the plug is accessible. Do not run cord over carpeting or other heat
insulators. Do not cover the cord. Keep cord away from traffic areas, and do not submerge in water . No
other appliance should be plugged into the same outlet, and be sure that the plug is fully inserted into
the receptacle.

We do not recommend the use of extension cord as it may overheat and cause a risk of fire. If you must
use an extension cord, use 1.5mm

2

minimum size and rated no less than 1875 watts.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.

Disconnect the mains plug from the supply socket when not in use for a long term, where supply
connection is via mains plug.

Remove power plug or disconnect from the mains before cleaning or servicing the appliance. NOTE: If

for any reason this product requires service, we strongly recommend that a certified technician perform
the service.

Never unplug you unit by pulling on the power cord. Always grasp the plug firmly and pull straight out
from the outlet.

Do not use your unit outdoors. Keep the unit away from direct sunlight and make sure that there is at
least 15 cm of space between the back of your unit and wall and keep the front free. Keep ventilation
opening in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not tip over the unit which will cause abnormal noisy and make the ice-cube size abnormal. And
seriously, it may cause water leakage from the unit.

If the unit is brought in from outside in the winter season, give it a few hours to warm up to room
temperature before plugging it in.

Do not use other liquid to make the ice-cube other than water.
Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.

4

-- WARNING: This appliance must be earthed. Use the proper power source according to the
nameplate.
– WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear

of obstruction.

– WARNING: Do not damage the refrigerant circuit.
– WARNING: This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

– WARNING: Children should be supervised to ensure that they do not play with the appliance.
– WARNING: This appliance must be earthed. And use the 110-1200V/60Hz earthed power supply.
– WARNING: Do not store explosive substances such as aerosol cans with a flammable propellant in

this appliance.
– WARNING: This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.

IMPORTANT:
The wires in this mains lead are colored in accordance with the following code:
Green or Green with a strip yellow: Earth
White: Neutral
Black: Live

To avoid a hazard due to instability of the appliance, it must be placed at a even or flat surface

5

SPECIFICATIONS

1) DIMENSIONS/CONNECTIONS

2) Rating

69184-MG-840 LEDOM

POWER SUPPLY VOLTAGE 1Phase, 110-120/60Hz

T/TS/N/NS SSALC ETAMIALC

ELECTRICAL PROTECTION CLASS I

ICE MAKING RATING (Amps) 3.5Amp

ICE HARVEST RATING (Amps) 5.5 Amp

ICE MAKING CAPACITY (KG/24H) 45kg/24Hour

*

REFRIGERANT CHARGE R134A, 240g

01H5C TNACISEV

UNIT DIMENSIONS(W X D X H) (mm) 448 x 400 x 798

NET WEIGHT/GROSS WEIGHT(KG) 28.3Kg

GWA81----DROC REWOP NOITCENNOC

WATER SUPPLY----6.35mm diamete
DRAIN----Φ16

SYLPHON BELLOWSS(REAR)

WATER CONSUMPTION(L/24H) 50L

MAX ICE STORAGE CAPACITY(KG) 15Kg

STIK NOITALLATSNI ,LEVOHS SEIROSSECCA

RUNNING CONDITIONS

ROOM TEMP 10-38℃
WATER SUPPLY TEMP 5-35℃

WATER SUPPLY PRESSURE 0.04-0.6 MPa

NOTE *: TESTED AT 21℃ ROOM TEMPERATURE AND 10℃ WATER TEMPERATURE.

Water
Inlet Port

Water
Drainage Port

03384-MG-840

1Phase, 110-120/60Hz

T/TS/N/NS

I

3.5Amp

5.5 Amp

45kg/24Hour

*

R134A, 240g

01H5C

448 x 400 x 798

28.3Kg

GWA81----DROC REWOP

WATER SUPPLY----6.35mm diamete
DRAIN----Φ16

SYLPHON BELLOWSS(REAR)

50L

15Kg

STIK NOITALLATSNI ,LEVOHS

ROOM TEMP 10-38℃
WATER SUPPLY TEMP 5-35℃

WATER SUPPLY PRESSURE 0.04-0.6 MPa

6

GENERAL INFORMATION

1) Main Unit Construction

1. Top cover

2. Door for ice taking

3. Ice-making & its water tank assembly: Including ice-making evaporator, water tank, water pump
and some detecting parts

4. Front panel

5. Operation panel

6. Air outlet: Must keep the air circulate smoothly, hot air will blow out when unit running.

7. Water draining port：Normal plugged with the cap. When need to drain the water, unplug the cap.
And connect the white drain pipe.

8. Water inlet port for water supply: Use to connect the water supply pipe.

Accessory: 2 meters long and white color water drain pipe、
water quick connector of the water faucet,
¢6.35mm diameter and white color water supply pipe(3 meters long）。

2) Ice-making and its water tank parts

7

A. Water dividing pipe：with nine little holes, water will flow out from these little holes. And if no water
flows out, can be disassembled and cleaned.
B. Evaporator (ice-making module)
C. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the the
ice-harvest process is over or not.
D．Water tank：
E．Water supplying pipe：
F．Cover board on the right side of the evaporator：
G．Water level switch installing plate：
H．Water drain pipe of the water tank：when ice-making, this pipe should be clamped in the slot of
the water tank wall; And when draining, this pipe should be pulled out.
I．Water pump：
J．Water level detecting switch

3) Operation panel

A．“ADD WATER”light：
When the light flashes, it means the water supplying now;
and when the light is on always, it means absence of water in unit.

B．“TIMER”light：
When this light is on, it means setting with the TIMER。
When the unit is turned off, can set with the ON-TIMER;

and when the unit is on, can set with OFF-Timer.

C．“ICE”light：

If the light is on, means the unit is making ice;

And if the light flashes, means the unit is during the ice-harvest process.
D．“FULL”light：
When the unit is full of the ice cube, the light will be on.
E．“CLEAN”light：

When this light is on, water pump cleaning start.

When the light flashes, water pump cleaning stop.
F．“+”、“-”button：

Use to adjust the ice-making process duration period length, the default setting is zero, 1
minute adding or decreasing per each pressing of “+” or “-” button.

Also to adjust the delay time of the timer, the default setting is zero, 1 hour adding or
decreasing per each pressing of “+” or “-” button.
G．“88”digital window：
At normal condition, the number in the window is on always, it means the ambient