DELLA 048-GM-48326 Instructions For Use Manual

048-GM-48326

3

SAFETEY OPERATION

Please exercise caution when using this air purifier or any other electrical device! This manual describes
the safety precautions which should be observed in relation to your air purifier. Please review carefully
BEFORE using this product.

DESCRIPTION OF THE APPLIANCE

High performance DC fan, low energy consumption, durable use
Built-in smart gas and dust sensor, automatic sensing and adjust airflow speed
Sleep mode, quite and comforting
Dust collector cell, easy to clean, never needs to be replaced
Multiple air inlets design effective in purification coverage
Large volumes of air rapidly circulate and purify air
Convenient remote control, six operating modes for easy control
High performance filter effectively removes PM2.5 and extra fine particles of 0.1 – 0.3 microns
Excellent dust removal rate up to 99.97%
Effectively eliminate odor and smoke to freshen the air
UV LED and catalyst technology effectively sterilize and kill bacteria

Features

2

CAUTION

The voltage rating for air purifiers sold in the
USA, Japan and Canada is AC100-120V,
50/60Hz and in Europe is AC 230V, 50Hz.
Using the wrong current may result in unit
damage, electrical shock or fire.

Do NOT operate your air purifier while it’s
covered with fabric, plastic or other materials.
This can obstruct air flow, damage the unit
and may pose a fire hazard.

Do NOT attempt to dismantle, repair or
modify this device on your own. Doing so
could result in electrical shock or damage to
the unit. In the event of malfunction, contact
an authorized maintenance facility.

Do NOT operate your air purifier in places
where flammable, explosive or otherwise
combustible materials are stored.

Do NOT place the unit in direct sunlight or
near lit fireplaces, furnaces, ovens or other
high temperature objects. Doing so can
damage the air purifier and may pose a fire
hazard. Avoid operating the unit when the
air temperature exceeds 104 F/40 C.

Do NOT place foreign objects in air purifier
which can damage the unit or result in
electrical shock. To avoid machine damage ,
injury and accidents, Do Not allow children to
touch or play with this device.

To avoid distortion or interference, your air
purifier should be placed at least three (3)
feet from computers, televisions and radios.

For safety reason and to avoid the risk of
electrical shock and/or fire, unplug your air
purifier from the electrical outlet under each
of the following conditions

If the electric cord is damaged in any way, it
must be replaced by the manufacturer or a
qualified service center. NEVER operate a
unit with a damaged electric cord. Doing so
presents a serious risk of fire and/or electrical
shock.

Clean sign

Control panel

Air Inlet

Air Outlet

Back View

Handle

Gas Sensor

Dust Sensor

Dust Collector Cell

DC FAN

UV LED

HEPA Filter

TiO2 Filter

MAJOR COMPONENTS

Air Inlet

Handle

To prevent the possibility of electrical shock
or short-circuiting your air purifier, Do NOT
place the unit in or near the shower, bathtub
or other places where water seep into and
damage the unit.

Pre-filter

Front cover

RATED

VOLTAGE

DO NOT

DISMANTLE

AVOID HEAT

SOURCES

AVOID

DIRECT

SUNLIGHT

DO NOT
TAMPER

KEEP AWAY

FROM WATER

DO NOT
COVER

DO NOT

DISTORTION

DAMAGED

CORD

WHEN TO

UNPLUG

·When cleaning or servicing the air purifier or
replacing filters

·When you will not be using your air purifier for
an extended time period（Traveling）

·When moving the unit from one location to another

When the air purifier or power cord gets heated,

burned smell or weird noise

When thundering or lightening

·

·

Activiated Carbon Filter

Ion Generator

PREPARATIONS BEFORE USE

5

Operation

Locate the unit on a solid surface. Be sure the air inlet/outlet is not blocked by other objects. (At
least 30cm clearance on the sides)
It is best to locate the unit where it will be out of any children's play area.
Before plugging in the unit, please open the windows in the area where you will be using the unit.
Ventilate the area for 2-3 hours if possible. Once the area has been ventilated, close the windows
and plug in the unit.(Figure 1)
Switch on the unit and start to operate under AUTO mode.
Once started, the color of CLEAN SIGN will change alternately for 1 minute (as it memorizes the
existing fresh air condition), and then CLEAN SIGN will indicate current air quality. (Figure 2)
After plugging in, the unit sensor will sample the air and retain a memory of the existing indoor air
condition. (The existing indoor air condition will be input as “Clean Air”).
Note: Whenever the unit is unplugged, all memorized content will be erased.

F1

For initial use or re-operate the unit after unplug, the sensor need to be pre-heated for 3-5
minutes and will not response during this period.
Besides, if the current air quality is not good (such as smoke, cosmetics or alcohol is
presented), please ventilate and freshen the air before closing windows.
Re-operate the unit after long period unused, the sensitivity of the sensor may decrease, it will
revert to normal after 1-2 days operation.

Caution

F2

PREPARATIONS BEFORE USE

4

For initial use or filter replacement, please remove the plastic bag of filter. If the
plastic bag is not removed, the unit may operate noisily.

USES OF FILTERS

The purifying efficiency will decrease if the air purifier operates without filters.
For initial use, new filters may emit a little smell; the smell will dissipate naturally
after operating for more than one day.
Please close the windows or door in the area during operation. For long time use,
please ventilate periodically.
If the smell is heavy in the area(such as cooking), please ventilate the area and
then remove the rest of smell by unit. Otherwise, the purifying efficiency may
decrease and the life span of activated carbon filter will reduce.

ACCESSORY LIST

Pre-filter

Dust Collector Cell

Owner's Manual

CLEAN SIGN

Owner's Manual

HEPA+Activiated Carbon Filter(2in1)

TiO2 Filter

Brush Remote Control