Dell XT2 XFR User Manual
11
18
20
Dell™ Latitude™ XT2 XFR
Setup and Features Information
WARNING: A WARNING indicates a potential for property damage, personal injury,
or death.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data
and tells you how to avoid the problem.
NOTE: A NOTE indicates important information that helps you make better use of your
computer.
Front and Right View
22
15
16
17
19
21
1
2
3
4
5
6
7
14
13
10
8
9
08/2009 4FNPNA00 Model P05S
12
Dell™ Latitude™ XT2 XFR Setup and Features Information
1 Display 12 Wireless radio on/off switch
2 Ambient light sensor 13 Touch pad
3 Device status lights 14 Touch pad/Track stick buttons
4 Digital array microphone 15 Track stick
5 Biometric reader 16 Keyboard
6 Microphone connector 17 Digital array microphone
7 Headphones connector 18 Power button
8 ExpressCard slot 19 Windows security button
9 Secure digital (SD) card slot 20 Screen rotate button
10 USB/e-SATA combo connector 21 Dell Control Point (DCP) button
11 Wi-Fi Catcher™ button 22 Hot Swappable Modules: Camera or
GPS (optional)
NOTE: Press <Fn><F9> to toggle between WLAN and WWAN. Latitude XT2 XFR does not
support simultaneous operation of WLAN and WWAN modes.
Page 2
Dell™ Latitude™ XT2 XFR Setup and Features Information
1
3
Back and Left View
16
15
14
13
12
11
10
9
8
4
5
6
7
2
1 Speaker 9 Tablet grip
2 IEEE 1394 connector 10 Rotating hinge
3 USB connector (for power share) 11 Powered USB connector
4 QuadCool™ Thermal Management 12 Network connector
5 Pen tether anchor 13 Video connector
6 Pen 14 AC adapter connector
7 Pen indicator LED 15 Tablet back button
8 Power / battery charge indicators 16 Scroll control button
WARNING: Do not block, push objects into, or allow dust to accumulate in the air
vents. Do not store your Dell™ computer in a low-airflow environment, such as a
closed briefcase, while it is running. Restricting the airflow can damage the computer
or cause a fire. The computer turns on the fan when the computer gets hot. Fan noise
is normal and does not indicate a problem with the fan or the computer.
Page 3
Dell™ Latitude™ XT2 XFR Setup and Features Information
Bottom View
1
2
3
4
5
1 Memory access 4 Docking connector
2 Wireless access 5 Hard disk drive access
3 Battery & HDD locking latches 6 Battery access
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
WARNING: This equipment is provided with external antenna connector(s) for
connectivity to a Port Replicator for mobile external mounted antenna(s). The external
antenna approved for use in this product is the AP-Quad Mode combo antenna.
External antenna(s) must be professionally installed and cannot exceed the
recommended maximum antenna gain for each specified band: 2.4GHz (3.24 dBi),
5.2GHz (3.73 dBi), 5.5GHz (4.77 dBi) and 5.8GHz (3.87 dBi). Additionally, the user
must maintain a minimum of 20cm spacing between the external antenna(s) and the
whole person’s body during wireless operation.
CAUTION: This product is restricted to indoor use only. The FCC requires the product to
be used indoors for the frequency range 5.15-5.25GHz to minimize interference in
Mobile Satellite systems’ channels. High Power Radars are the primary users of the
5.25-5.35GHz and 5.65-5.85GHz bands. These radar stations can cause interference
with and/or damage the product.
6
Page 4
Dell™ Latitude™ XT2 XFR Setup and Features Information
I/O Door Operation
All ports and I/O connectors on the computer are secured behind locking I/O doors. To open the I/O
locking doors, use the following procedure.
1. The image below shows the door in its closed and locked position. Lift the door flap.
2. To unlock the door, rotate the flap clockwise 180
3. Pull the flap to open the door.
0
.
Page 5
Dell™ Latitude™ XT2 XFR Setup and Features Information
4. The door is now in its open position.
5. Reverse the procedure to close and lock the door.
Quick Setup
WARNING: Before you begin any of the procedures in this section, read the safety
information that shipped with your computer. For additional safety best practices
information, see www.dell.com/regulatory_compliance.
WARNING: The AC adapter works with electrical outlets worldwide. However, power
connectors and power strips vary among countries. Using an incompatible cable or
improperly connecting the cable to the power strip or electrical outlet may cause fire
or equipment damage.
CAUTION: When you disconnect the AC adapter cable from the computer, grasp the
connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
When you wrap the AC adapter cable, ensure that you follow the angle of the
connector on the AC adapter to avoid damaging the cable.
NOTE: Some devices may not be included if you did not order them.
NOTE: All ports and I/O connectors are sealed behind I/O locking doors. See section above on
I/O Door Operation.
1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical
outlet.
Page 6
Dell™ Latitude™ XT2 XFR Setup and Features Information
2. Connect the network cable.
3. Connect USB devices, such as a mouse or keyboard.
4. Connect IEEE 1394 devices, such as a DVD player.
5. Open the computer display and press the power button to turn on the computer.
1
2
1 Power indicator 2 Battery charge indicator
Page 7
Dell™ Latitude™ XT2 XFR Setup and Features Information
NOTE: It is recommended that you turn on and shut down your computer at least once before
you install any cards or connect the computer to a docking device or other external device, such
as a printer.
Battery
Battery Removal
1. Ensure that the computer is turned off.
2. If the computer is connected to a docking device (docked), undock it. See the documentation
that came with your docking device for instructions.
3. Ensure that the computer is turned off.
4. Turn the computer upside down and place on a flat surface.
5. Lift the locking latches on the left and right side of the battery.
6. Push the locking latches outward, as shown below.
Page 8
Loading...