Non-volatile memory, 512k
Part place on Interface Board,
Part place on Interface Board.
EEPROM
Non-volatile EEPROM 2Kbit.
Part place on Interface Board,
Non-volatile Flash ROM 2Mbit.
Part place on Interface Board,
Non-volatile EEPROM 2Kbit.
Part place on Interface Board,
Statement of Volatility – Dell UP2414Q
CAUTION: A CAUTION indicat es e ith er po ten ti a l dam age to hardware or loss of data and tells you how to avoid the
problem.
The Dell UP2414Q contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the XXXX system board.
Table 1. List of Non-Volatile Components on System Board
Description
Serial Flash
ROM
W25Q16CV
EEPROM
M24512
DDR3
SDRAM
NT5CB64M
16FP-DH
24C02
ROM
PM25LD020
Reference
Designator
I245 / I248 /
I251
I252
I225 / I226 /
I227 / I228 /
I229 / I230
Volatility Description
Non-volatile Flash memory,
16M bit. To store firmware.
bit. To store DP EDID,
HDCP and user adjust data.
(64Mbx16). To store video
data stream and firmware
code.
To store HDMI EDID data.
To store firmware.
Accessible
for external
data
No Part place on Interface Board,
Remedial Action (Action
necessary to prevent loss of
data)
it has hardware/software write
protected.
it has hard
protected.
it has hardware/soft
protected.
it has soft
ware/software write
ware write
ware write protected.
24C02
CAUTION: All other componen ts on t he s yst em boar d l ose da ta if power is removed from the system. Pr im ary p owe r
loss (unplugging the power co rd an d removing the battery) destroys all u ser da ta on the memory (DDR3, 1067 MHz).
Secondary power loss (removing the on-board coin-cell battery) des tro ys syst em data on the system configuration
and time-of-day information.
Month yyyy
To store monitor DC on / off
store.
it has soft
ware write protected.