Dell Precision Rack 7910, Precision Tower 5810, Precision Tower 7810, Precision Tower 7910 Setup Guide

Dell Precision Tower 5810/7810/7910 and Rack
7910

Dual/Quad Host PCIe Cards Setup Guide

Installing the Dual/Quad Host Cards

This section describes in brief on how to install the dual/quad host cards on a Dell Precision Tower 5810,
7810, 7910, and Rack 7910.

1. If you purchased a customer install kit, install the host card in a PCIe slot in your Dell Precision
computer.

NOTE: The purchased customer install kit will be shipped with the host cards.

2. For instructions on how to install the host card and connect the two-wire cable (included in the kit),
see the Owner’s Manual for your computer at www.dell.com/manuals.

NOTE: To download the drivers for install, go to www.dell.com/support.

Finding More Information and Resources

See the safety and regulatory documents that shipped with your computer and the regulatory
compliance website at www.dell.com/regulatory_compliance for more information on:

• Safety best practices

• Regulatory certification

• Ergonomics

See www.dell.com for additional information on:

• Warranty

• Terms and Conditions (U.S. only)

• End User License Agreement

Additional information on your product is available at www.dell.com/support/manuals

Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and
intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

2014- 09