Dell PowerEdge R920 User Manual

Dell PowerEdge R920
Getting Started Guide

Regulatory Model: E23S Series
Regulatory Type: E23S001

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property
laws.
mentioned herein may be trademarks of their respective companies.

2013 – 06

Rev. A00

™

and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names

Dell

Installation And Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the system.

Unpacking A Rack System

Unpack your system and identify each item.
Assemble the rails and install the system in the rack following the safety instructions and the rack installation

instructions provided with your system.

Figure 1. Installing the Rails and System in a Rack

Optional—Connecting The Keyboard, Mouse, And Monitor

Figure 2. Optional—Connecting Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating the type of cable to be plugged into each connector.

Be sure to tighten the screws (if any) on the monitor's cable connector.

3