pravicah ter intelektualni lastnini. Dell™ in logotip Dell sta blagovni znamki družbe Dell Inc. v Združenih državah Amerike in/ali v drugih
pristojnostih. Vse druge znamke in imena, omenjene v tem dokumentu, so lahko blagovne znamke ustreznih družb.
2015–01
Rev. A00
Contents
1 Preden začnete delo v notranjosti računalnika................................................................................. 7
Preden začnete .....................................................................................................................................................................7
5 Odstranjevanje osnovne plošče.................................................................................................... 12
Pred postopkom................................................................................................................................................................... 12
Po postopku..........................................................................................................................................................................13
Pred postopkom................................................................................................................................................................... 14
Po postopku..........................................................................................................................................................................16
Pred postopkom................................................................................................................................................................... 17
Po postopku..........................................................................................................................................................................18
Pred postopkom...................................................................................................................................................................19
Po postopku......................................................................................................................................................................... 20
Pred postopkom................................................................................................................................................................... 21
Po postopku......................................................................................................................................................................... 23
15 Odstranjevanje naslona za dlani.................................................................................................. 24
Po postopku......................................................................................................................................................................... 27
Po postopku......................................................................................................................................................................... 30
19 Odstranjevanje plošče gumba za vklop.........................................................................................31
Po postopku......................................................................................................................................................................... 33
Po postopku......................................................................................................................................................................... 36
Po postopku......................................................................................................................................................................... 38
Po postopku......................................................................................................................................................................... 42
Po postopku......................................................................................................................................................................... 47
Po postopku......................................................................................................................................................................... 53
35 Odstranjevanje vrat za napajalnik...............................................................................................54
Po postopku.........................................................................................................................................................................55
Po postopku......................................................................................................................................................................... 57
Po postopku.........................................................................................................................................................................60
Po postopku......................................................................................................................................................................... 63
Po postopku.........................................................................................................................................................................66
46 Iskanje pomoči in stik z družbo Dell............................................................................................ 68
6
Contents
Preden začnete delo v notranjosti računalnika
OPOMBA The images in this document may differ from your computer depending on the configuration you ordered.
Teme:
•Preden začnete
•Varnostna navodila
•Priporočena orodja
Preden začnete
1. Shranite in zaprite vse odprte datoteke ter zaprite vse odprte programe.
2. Zaustavite računalnik.
•Windows 10: Kliknite ali tapnite Start > Napajanje > Zaustavitev sistema.
•Windows 8.1: Na začetnem zaslonu tapnite ali kliknite ikono za napajanje > Zaustavitev računalnika.
•Windows 7: kliknite ali tapnite Start > Zaustavitev.
1
OPOMBA
sistema.
3. Računalnik in vse priključene izključite naprave iz električnih vtičnic.
4. Iz računalnika izključite vse telefonske kable, omrežne kable in druge kable.
5. Iz računalnika izključite vse priključene naprave, kot so tipkovnica, miška, monitor in druge naprave.
6. Iz računalnika odstranite vse pomnilniške kartice in optične pogone.
Če uporabljate drug operacijski sistem, navodila za izklop poiščite v dokumentaciji vašega operacijskega
Varnostna navodila
Uporabite naslednja varnostna navodila, da zaščitite računalnik pred morebitnimi poškodbami in zagotovite svojo lastno varnost.
OPOMBA
safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
OPOMBA Disconnect all power sources before opening the computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to the power source.
POZOR To avoid damaging the computer, ensure that the work surface is flat and clean.
POZOR To avoid damaging the components and cards, handle them by their edges and avoid touching pins and
contacts.
POZOR You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety
instructions that shipped with the product or at www.dell.com/regulatory_compliance.
Before working inside your computer, read the safety information that shipped with your computer. For more
POZOR Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such
as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate
static electricity, which could harm internal components.
POZOR When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have
connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When
disconnecting cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure
that the ports and connectors are correctly oriented and aligned.
Preden začnete delo v notranjosti računalnika7
POZOR Press and eject any installed card from the media-card reader.
Priporočena orodja
Za postopke, navedene v tem dokumentu, boste potrebovali naslednja orodja:
•Izvijač Phillips
•Plastično pero
8Preden začnete delo v notranjosti računalnika
After working inside your tablet
CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer.
1. Replace all screws and ensure that no stray screws remain inside your tablet.
2. Connect any external devices, peripherals, and cables you removed before working on your tablet.
3. Replace any media cards, discs, and any other parts that you removed before working on your tablet.
4. Connect your tablet and all attached devices to their electrical outlets.
5. Turn on your tablet.
2
After working inside your tablet9
Odstranjevanje baterije
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Procedure
Procedure
1. Close the display and turn the computer over.
2. Slide the battery-release latch to the unlock position.
3. Lift the battery at an angle and remove the battery from the battery bay.
3
1. battery2. battery-release latch
4. Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
10Odstranjevanje baterije
Ponovna namestitev baterije
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Postopek
Postopek
Potisnite jezičke na bateriji v reže na ležišču za baterijo ter nežno pritisnite baterijo, da se zaskoči.
OPOMBA
Zapah za sprostitev baterije gre nazaj v zaklenjen položaj, če je baterija pravilno nameščena.
4
Ponovna namestitev baterije11
Odstranjevanje osnovne plošče
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Pred postopkom
•Postopek
Pred postopkom
Odstranite baterijo.
Postopek
1. Odstranite vijake, s katerimi je osnovna plošča pritrjena na ohišje računalnika.
2. S konicami prstov nežno privzdignite osnovno ploščo z ohišja računalnika.
5
Osnova računalnika2. Vijaka (2)
1.
3. spodnjo ploščo
12Odstranjevanje osnovne plošče
Ponovna namestitev osnovne plošče
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Postopek
•Po postopku
Postopek
1. Jezičke na osnovni plošči potisnite v reže na ohišju računalnika in osnovno ploščo nežno pritisnite na ustrezno mesto.
2. Namestite vijake, s katerimi je osnovna plošča pritrjena na ohišje računalnika.
Po postopku
Ponovno namestite baterijo.
6
Ponovna namestitev osnovne plošče13
Odstranjevanje trdega diska
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
POZOR Hard drives are fragile. Exercise care when handling the hard drive.
POZOR To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
Teme:
•Pred postopkom
•Procedure
Pred postopkom
1. Odstranite baterijo.
2. Odstranite osnovno ploščo.
7
Procedure
1. Remove the screws that secure the hard-drive assembly to the computer base.
2. Lift the latch and disconnect the hard-drive cable from the system board.
3. Lift the hard-drive assembly off the computer base.
screws (4)2. hard-drive assembly
1.
3. hard-drive cable4. latch
4. Disconnect the interposer from the hard drive.
14Odstranjevanje trdega diska
1. hard-drive assembly2. interposer
5. Remove the screws that secure the hard-drive bracket to the hard drive and lift the hard-drive bracket off the hard drive.
screws (4)2. hard-drive bracket
1.
3. hard drive
Odstranjevanje trdega diska15
8
Ponovna namestitev trdega diska
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
POZOR Hard drives are fragile. Exercise care when handling the hard drive.
Teme:
•Postopek
•Po postopku
Postopek
1. Namestite nosilec trdega diska na trdi disk in poravnajte odprtine za vijake na nosilcu trdega diska z odprtinami za vijake na trdem
disku.
2. Ponovno namestite vijake, s katerimi je nosilec trdega diska pritrjen na trdi disk.
3. Potisnite sklop trdega diska v ohišje računalnika in poravnajte odprtine za vijake na sklopu trdega diska z odprtinami za vijake na ohišju
računalnika.
4. Priključite kabel trdega diska na trdi disk.
5. Ponovno namestite vijake, s katerimi je sklop trdega diska pritrjen na osnovo računalnika.
Po postopku
1. Ponovno namestite osnovno ploščo.
2. Ponovno namestite baterijo.
16Ponovna namestitev trdega diska
Odstranjevanje pomnilniških modulov
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Pred postopkom
•Procedure
Pred postopkom
1. Odstranite baterijo.
2. Odstranite osnovno ploščo.
Procedure
1. Using your fingertips, pry apart the securing clips on each end of the memory-module slot until the memory module pops up.
2. Slide and remove the memory module from the memory-module slot.
9
securing clips2. memory module
1.
Odstranjevanje pomnilniških modulov17
Ponovna namestitev pomnilniških modulov
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Procedure
•Po postopku
Procedure
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
10
NOTE:
1. notch2. memory module
3. securing clips4. tab
If you do not hear the click, remove the memory module and reinstall it.
Po postopku
1. Ponovno namestite osnovno ploščo.
2. Ponovno namestite baterijo.
18Ponovna namestitev pomnilniških modulov
Odstranjevanje brezžične kartice
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Pred postopkom
•Procedure
Pred postopkom
1. Odstranite baterijo.
2. Odstranite osnovno ploščo.
Procedure
1. Disconnect the antenna cables from the wireless card.
2. Remove the screw that secures the wireless card to the system board.
3. Lift the wireless card, and then slide and remove it from the system board.
11
antenna cables (2)2. wireless card
1.
3. screw4. notch
5. tab
Odstranjevanje brezžične kartice19
Ponovna namestitev brezžične kartice
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Postopek
•Po postopku
Postopek
12
POZOR
1. Zarezo na brezžični kartici poravnajte z jezičkom na reži za brezžično kartico in nato potisnite kartico v režo.
2. Ponovno namestite vijak, s katerim je brezžična kartica pritrjena na matično ploščo.
3. Antenske kable priključite na brezžično kartico. V spodnji tabeli je prikazana barvna shema antenskih kablov za brezžično kartico, ki jo
podpira vaš računalnik:
Connectors on the wireless card
Main (white triangle)White
Auxiliary (black triangle)Black
Ne postavljajte kablov pod brezžično kartico, da je ne poškodujete.
Antenna-cable color
Po postopku
1. Ponovno namestite osnovno ploščo.
2. Ponovno namestite baterijo.
20Ponovna namestitev brezžične kartice
Odstranjevanje tipkovnice
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•Pred postopkom
•Postopek
Pred postopkom
Odstranite baterijo.
Postopek
1. Obrnite računalnik in odprite zaslon, kolikor je mogoče.
2. S plastičnim peresom nežno sprostite jezičke, s katerimi je tipkovnica pritrjena na sklop naslona za dlani.
13
Jeziček2. Plastično pero
1.
3. Tipkovnica4. Sklop naslona za dlani
3. Previdno obrnite tipkovnico in jo postavite na sklop naslona za dlani.
4. Dvignite zapahe in odklopite kabel tipkovnice in kabel za osvetlitev ozadja tipkovnice s sistemske plošče.
OPOMBA
Kabel za osvetlitev tipkovnice je na voljo le, če je prenosni računalnik opremljen z osvetljeno tipkovnico.
Odstranjevanje tipkovnice21
Loading...
+ 47 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.