Dell Express Flash PM1735
Technical Specifications and Information
July 2020
Rev. A00
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
Dell Express Flash PM1735 Specifications and
Information
Use these specifications and model-specific information to ensure proper application of your PM1735.
Table 1. PM1735 technical specifications
Features Description
Media type V5 256/512 Gb NAND
Capacities or form factors 1.6 TB U.2
1.6 TB HHHL low-profile AIC
3.2 TB U.2
6.4 TB U.2
6.4 TB HHHL low-profile AIC
1
Capacities or form factors (Qualified, not shipped (QNS))
NOTE: QNS components are not shipped with
the standard PowerEdge servers. Contact your
sales representative to purchase a system with
QNS components.
User-addressable 512-byte sectors
Host bus interface PCIe Gen 4.0 x 4, U.2
Device protocol NVM Express 1.3
TCG Support OPAL 2.0, SED device only
1.6 TB SED U.2
1.6 TB SED HHHL low-profile AIC
3.2 TB SED U.2
3.2 TB SED HHHL low-profile AIC
3.2 TB HHHL low-profile AIC
6.4 TB SED U.2
6.4 TB SED HHHL low-profile AIC
12.8 TB SED U.2
12.8 TB U.2
1.6 TB: 3,125,627,568
3.2 TB: 6,251,233,968
6.4 TB: 12,502,446,768
12.8TB: 25,000,148,992
PCIe Gen 4.0 x 8, AIC
Multiple namespaces support Yes, limited support only
Bootable device Yes, U.2 only, UEFI mode only
Hot-swap support Yes, U.2 only
I/O operations per second, 4 K random read/write up to 800/220 K IOPS, U.2
Dell Express Flash PM1735 Specifications and Information 3
Table 1. PM1735 technical specifications(continued)
Features Description
up to 1500/250 K IOPS, AIC
Endurance rating (TBW) 1.6 TB: 8.76 PB, 3 DWPD
3.2 TB: 17.52 PB, 3 DWPD
6.4 TB: 35.04 PB, 3 DWPD
12.8 TB: 70.08 PB, 3 DWPD
Data retention at end of life 3 months at 40°C
Power 12 V, 3.3 V aux
8.5 W idle, typical
25 W active, max
Operating temperature 0 °C–70°C, Operating temperature
-40 to 85℃, Non-operating temperature
Physical dimensions (Width x Length x Thickness) 69.85 mm ± 0.25 mm x 100.20 mm ± 0.25 mm x 15.00 mm + 0.00/-0.50
mm, U.2
Max 68.90 mm x Max 167.65 mm x Max 18.71 mm, AIC
Weight Up to 190g, U.2
Up to 310g, AIC
Shock 1,500 G/0.5 millisecond
Vibration 20 Gpeak, 10 Hz ~ 2000 Hz
Minimum supported operating systems
NOTE: Supported on all operating systems using the included native drivers.
• Microsoft
○ Windows Server 2019
○ Windows Server 2019 (including Hyper-V)
○ Windows Server 2016
○ Windows Server 2016 (including Hyper-V)
○ Windows Server 2012 R2 64-Bit
• Linux
○ Red Hat Enterprise Linux 8.0 and above
○ Red Hat Enterprise Linux 7.6 and above
○ Red Hat Enterprise Linux 7.5 (Kernel 3.10.0)
○ SUSE Linux Enterprise Server 15 and above
○ SUSE Linux Enterprise Server 12 SP3 and above
○ SUSE Linux Enterprise Server 12 (Kernel 3.12.61)
○ CentOS 7.5 (Kernel 3.10.0)
• Ubuntu
○ Ubuntu 18.04 and above
• VMware
○ ESXi 7.0 and above
○ ESXi 6.7 and above
4
Dell Express Flash PM1735 Specifications and Information
○ ESXi 6.5 and above
Dell Express Flash PM1735 Specifications and Information 5
Loading...