Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your Monitor. Some features or media may not be available in certain countries.
Monitor with stand
Power Cable
VGA Cable
DVI Cable
Drivers and Documentation media
Quick Setup Guide
Safety Information
Product Features
The Dell™ E2009W/E2209W flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:
■E2009W:20-inch (508 mm) viewable area display.
■E2209W:22-inch (558.68 mm) viewable area display.
■ 1680 x 1050 resolution, plus full-screen support for lower resolutions.
■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side.
■ Tilt adjustment capabilities.
■ Plug and play capability if supported by your system.
■ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■ Software and documentation media includes an information file (INF), Image color Matching File (ICM), and product documentation.
■ Energy Saver feature for Energy Star compliance.
■ Asset Management Capable.
Identifying Parts and Controls
Front View
Front ViewFront panel controls
1OSD menu button
2Up button
3Down button
4OK button
5Power button
Back View
Back viewBack View with monitor stand
LabelDescription/Use
1
VESA mounting holes (100mm)
(Behind attached VESA plate)
Use to mount the monitor.
2Barcode serial number labelRefer to this label if you need to contact Dell for technical support.
3Security lock slotUse a security lock with the slot to help secure your monitor.
4Dell Soundbar mounting bracketsAttach the optional Dell Soundbar.
5Stand removal buttonPress to release the stand.
6Regulatory rating labelLists the regulatory approvals.
7Cable management slotHelp organize cables by placing them through the slot.
Weight with packaging14.15 lbs (6.42 kg)16.76 lbs (7.62 kg)
Weight with stand assembly and cables10.80 lbs (4.90 kg)13.16 lbs (5.98 kg)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
8.10 lbs (3.68 kg)11.92 lbs (5.41 kg)
Weight of stand assembly2.64 lbs (1.20 kg)2.73 lbs (1.24 kg)
Environmental Characteristics
ModelE2009W/E2209W
Temperature
Operating5° to 35°C (41° to 95°F)
Non-operating
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F)
Humidity
Operating10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude
Operating3,657.6m (12,000 ft) max
Non-operating12,192 m (40,000 ft) max
Thermal dissipation
256.08 BTU/hour (maximum)
153.6 BTU/hour (typical)
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is
referred to as Power Save Mode*. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following
table shows the power consumption and signaling of this automatic power saving feature:
E2009W
VESA ModesHorizontal SyncVertical SyncVideoPower IndicatorPower Consumption
Normal operationActiveActiveActiveBlue38 W (typical)/43 W (maximum)
Active-off modeInactiveInactiveBlankedAmberLess than 2 W
Switch off---OffLess than 1 W
E2209W
VESA ModesHorizontal SyncVertical SyncVideoPower IndicatorPower Consumption
Normal operationActiveActiveActiveBlue40 W (typical)/45 W (maximum)
Active-off modeInactiveInactiveBlankedAmberLess than 2 W
Switch off---OffLess than 1 W
The OSD will only function in the normal operation mode. When the menu or plus buttons are pressed in Active-off mode, one of the following messages will be displayed:
Analog Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
OR
Digital Input In Power Save Mode. Press Computer Power Buttonor Any Key on Keyboard or Move Mouse
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR®-compliant as well as TCO '99/TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Pin
Number
15-pin Side of the Connected Signal
Cable
1Video-Red
2Video-Green
3Video-Blue
4GND
5Self-test
6GND-R
7GND-G
8GND-B
9Computer 5V/3.3V
10GND-sync
11GND
12DDC data
13H-sync
14V-sync
15DDC clock
DVI Connector
Pin
Number
24-pin Side of the Connected Signal
Cable
1TMDS RX2-
2TMDS RX2+
3TMDS Ground
4Floating
5Floating
6DDC Clock
7DDC Data
8Floating
9TMDS RX1-
10TMDS RX1+
11TMDS Ground
12Floating
13Floating
14+5V/+3.3V power
15Self test
16Hot Plug Detect
17TMDS RX0-
18TMDS RX0+
19TMDS Ground
20Floating
21Floating
22TMDS Ground
23TMDS Clock+
24TMDS Clock-
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can
select different settings if desired. For more information about changing the monitor settings, see
Operating the Monitor.
LCD Monitor Quality and Pixel Policy
During the LCD monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that
appears as an extremely tiny dark or bright discolored spot. In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A
display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.
Maintenance Guidelines
Cleaning Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
If you notice white powder when you unpack your monitor, wipe it off with a cloth.
Handle your monitor with care as dark-colored monitors may scratch and show white scuff marks more than light-colored monitors.
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.
Back to Contents Page
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.