Dell Dimension 9100 User Manual

Dell™ Dimension™ 9100

CD or DVD eject button

CD or DVD activity light

FlexBays (2) for optional floppy drive or optional Media Card Reader

microphone connector

headphone connector

diagnostic lights

hard-drive activity light

power button

USB 2.0 connectors (2)

Service Tag

cover latch release

power connector

sound-card connectors (5)

network adapter

USB 2.0 connectors (5)

Model DCTA

card slots for PCI Express x1 (1), PCI Express x16 (1), PCI Express x4 (1), PCI (3)

www.dell.com | support.dell.com

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.

____________________

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, P owerEdge, P owerV ault, P owerApp,

DellNet, and PowerConnect are trademarks of Dell Inc.; Intel and Pentium, and Intel SpeedStep are registered trademarks of Intel Corporation; Microsoft, Windows, and Outlook are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model DCTA

March 2005 P/N D8663 Rev. A00

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1 Setting Up and Using Your Computer

Setting Up a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Printer Cable

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting a USB Printer

. . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to the Internet

Setting Up Your Internet Connection

Playing CDs and DVDs

Adjusting the Volume Adjusting the Picture

Copying CDs and DVDs

How to Copy a CD or DVD Using Blank CD-Rs and CD-RWs Helpful Tips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using a Media Card Reader (Optional)

Connecting Two Monitors

Connecting Two Monitors With VGA Connectors

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

. . . . . . . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . 22

Connecting One Monitor With a VGA Connector and One Monitor With a DVI Connector

Connecting a TV Changing the Display Settings

Setting Up a Home and Office Network

Connecting to a Network Adapter Network Setup Wizard

Power Management

Standby Mode Hibernate Mode Power Options Properties

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . 26

Contents 3

IEEE 1394 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Hyper-Threading

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2 Solving Problems

Troubleshooting Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Battery Problems

Drive Problems

CD and DVD drive problems Hard drive problems

E-Mail, Modem, and Internet Problems

Error Messages

Media Card Reader Problems

Keyboard Problems

Lockups and Software Problems

The computer does not start up The computer stops responding A program stops responding A program crashes repeatedly A program is designed for an earlier Windows operating system A solid blue screen appears Other software problems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . . 35

. . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . 36

4 Contents

Memory Problems

Mouse Problems

Network Problems

Power Problems

Printer Problems

Scanner Problems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Sound and Speaker Problems

No sound from speakers No sound from headphones

. . . . . . . . . . . . . . . . . . . . . . . . . . 41

. . . . . . . . . . . . . . . . . . . . . . . . 42

Video and Monitor Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 42

If the screen is blank If the screen is difficult to read

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

. . . . . . . . . . . . . . . . . . . . . . . 43

3 Troubleshooting Tools

Diagnostic Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Dell Diagnostics

Dell Diagnostics Main Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Drivers

What Is a Driver? Identifying Drivers Reinstalling Drivers

Resolving Software and Hardware Incompatibilities

Restoring Your Operating System

Using Microsoft Using Dell PC Restore by Symantec

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . . . 51

Windows XP System Restore . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . 53

4 Removing and Installing Parts

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Recommended Tools Turn Off Your Computer Before Working Inside Your Computer

Front View of the Computer

Back View of the Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

. . . . . . . . . . . . . . . . . . . . . . . . . . . 55

. . . . . . . . . . . . . . . . . . . 56

. . . . . . . . . . . . . . . . . . . . . . . . . . . 57

. . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Removing the Computer Cover

Inside View of Your Computer

System Board Components

Memory

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Memory Overview Installing Memory Removing Memory

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

. . . . . . . . . . . . . . . . . . . . . . . . . . 60

. . . . . . . . . . . . . . . . . . . . . . . . . . 62

Contents 5

Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

PCI Cards PCI Express Cards

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Drive Panels

Drives

Hard Drive

Floppy Drive

Media Card Reader

CD/DVD Drive

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Removing the Drive Panel Removing the Drive-Panel Insert Replacing the Drive-Panel Insert Replacing the Drive Panel

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

General Installation Guidelines

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Removing a Hard Drive Installing a Hard Drive Adding a Second Hard Drive

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Removing a Floppy Drive Installing a Floppy Drive

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Removing a Media Card Reader Installing a Media Card Reader

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Removing a CD/DVD Drive Installing a CD/DVD Drive

. . . . . . . . . . . . . . . . . . . . . . . . . 82

. . . . . . . . . . . . . . . . . . . . . . 83

. . . . . . . . . . . . . . . . . . . . . . 84

. . . . . . . . . . . . . . . . . . . . . . . . . 84

. . . . . . . . . . . . . . . . . . . . . . . 85

. . . . . . . . . . . . . . . . . . . . . . . . . . . 87

. . . . . . . . . . . . . . . . . . . . . . . . . . . 88

. . . . . . . . . . . . . . . . . . . . . . . . 89

. . . . . . . . . . . . . . . . . . . . . . . . . . 91

. . . . . . . . . . . . . . . . . . . . . . . . . . 93

. . . . . . . . . . . . . . . . . . . . . . 93

. . . . . . . . . . . . . . . . . . . . . . . 95

. . . . . . . . . . . . . . . . . . . . . . . . . 98

. . . . . . . . . . . . . . . . . . . . . . . . . . 99

5 Appendix

6 Contents

Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Replacing the Battery

Replacing the Computer Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . 101

. . . . . . . . . . . . . . . . . . . . . . . . 102

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

System Setup

Overview Entering System Setup System Setup Options Boot Sequence

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

. . . . . . . . . . . . . . . . . . . . . . . . . . 108

. . . . . . . . . . . . . . . . . . . . . . . . . . . 110

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Clearing Forgotten Passwords. . . . . . . . . . . . . . . . . . . . . . . . . 114

Clearing CMOS Settings

Cleaning Your Computer

Computer, Keyboard, and Monitor

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Mouse Floppy Drive CDs and DVDs

Dell Technical Support Policy (U.S. Only)

Definition of "Dell-Installed" Software and Peripherals Definition of "Third-Party" Software and Peripherals

FCC Notices (U.S. Only)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Class A Class B

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

FCC Identification Information

Contacting Dell

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

. . . . . . . . . . . . . . . . . . . . 116

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

. . . . . . . . . . . . . . . . . . . 117

. . . . . . . . . 117

. . . . . . . . . . . 118

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

. . . . . . . . . . . . . . . . . . . . . . 119

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Contents 7

8 Contents

Finding Information

What Are You Looking For? Find It Here

• Warranty information

• Terms and conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

• How to set up my computer

Dell™ Product Information Guide

NOTE: This document is available as a PDF at

support.dell.com.

Setup Diagram

Finding Information 9

What Are You Looking For? Find It Here

• Service Tag and Express Service Code

• Microsoft Windows License Label

www.dell.com | support.dell.com

Service Tag and Microsoft Windows License

These labels are located on your computer.

• Use the Service Tag to

• Enter the Express

identify your computer when you

support.dell.com

use or contact technical support.

Service Code to direct your call when contacting technical support. The Express Service Code is not available in all countries.

10 Finding Information

What Are You Looking For? Find It Here

• Solutions — Troubleshooting hints and tips, articles from technicians, online courses, frequently asked questions

• Community — Online discussion with other Dell customers

• Upgrades — Upgrade information for components, such as memory, the hard drive, and the operating system

Dell Support Website — support.dell.com

NOTE: Select your region to view the appropriate support

site.

NOTE: Corporate, government, and education customers

can also use the customized Dell Premier Support website at premier.support.dell.com. The website may not be available in all regions.

• Customer Care — Contact information, service call and order status, warranty, and repair information

• Service and support — Service call status and support history, service contract, online discussions with technical support

• Reference — Computer documentation, details on my computer configuration, product specifications, and white papers

• Downloads — Certified drivers, patches, and software updates

• Desktop System Software (DSS)— If you reinstall the operating system for your computer, you should also reinstall the DSS utility. DSS provides critical updates for your operating system and support for Dell™

3.5-inch USB floppy drives, Intel

Pentium®M processors, optical drives, and USB devices. DSS is necessary for correct operation of your Dell computer. The software automatically detects your computer and operating system and installs the updates appropriate for your configuration.

To download Desktop System Software:

Go to

support.dell.com

Enter your Service Tag or product model.

In the

Download Category

Select the operating system and operating system language for your computer, and click

Under

Select a Device Configuration Utilities Software

and click

Downloads

drop-down menu, click

Submit.

, scroll to

, and click

System and

Dell Desktop System

All

Finding Information 11

What Are You Looking For? Find It Here

• How to use Windows XP

• Documentation for my computer

• Documentation for devices (such as a modem)

www.dell.com | support.dell.com

Windows Help and Support Center

Click the

Start

button and click

Help and Support

Type a word or phrase that describes your problem and click the arrow icon.

Click the topic that describes your problem. Follow the instructions on the screen.

12 Finding Information

Setting Up and Using Your Computer

Setting Up a Printer

NOTICE: Complete the operating system setup before you connect a printer to the computer.

See the documentation that came with the printer for setup information, including how to:

• Obtain and install updated drivers

• Connect the printer to the computer

• Load paper and install the toner or ink cartridge

• Contact the printer manufacturer for technical assistance

Printer Cable

Your printer connects to your computer with a USB cable. Your printer may not come with a printer cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you purchased a printer cable at the same time you purchased your computer, the cable may arrive in the computer box.

Setting Up and Using Your Computer 13

Connecting a USB Printer

NOTE: You can connect USB devices while the computer is turned on.

Complete the operating system setup, if you have not already done so.

Install the printer driver if necessary. See the documentation that came with your printer.

Attach the USB printer cable to the USB connectors on the computer and the printer. The USB connectors fit only one way.

USB connector on computer

www.dell.com | support.dell.com

Connecting to the Internet

NOTE: ISPs and ISP offerings vary by country.

To connect to the Internet, you need a modem or network connection and an Internet service provider (ISP), such as AOL or MSN. Your ISP will offer one or more of the following Internet connection options:

• Dial-up connections that provide Internet access through a telephone line. Dial-up connections are considerably slower than DSL and cable modem connections.

• DSL connections that provide high-speed Internet access through your existing telephone line. With a DSL connection, you can access the Internet and use your telephone on the same line simultaneously.

• Cable modem connections that provide high-speed Internet access through your local cable TV line.

USB printer cable

USB connector on printer

14 Setting Up and Using Your Computer

NOTE: If you use a dial-up connection, you need an add-in PCI modem expansion card.

If you are using a dial-up connection, connect a telephone line to the modem connector on your computer and to the telephone wall jack before you set up your Internet connection. If you are using a DSL or cable modem connection, contact your ISP for setup instructions.

Setting Up Your Internet Connection

To set up an AOL or MSN connection:

Save and close any open files, and exit any open programs.

Double-click the

Follow the instructions on the screen to complete the setup.

If you do not have an Internet connection with a different ISP:

Save and close any open files, and exit any open programs.

Click the

The

Click

In the next window, click the appropriate option:

Start

New Connection Wizard

Connect to the Internet

• If you do not have an ISP and want to select one, click

service providers (ISPs)

• If you have already obtained setup information from your ISP but you did not receive a setup CD, click

• If you have a CD, click

Click

If you selected instructions on the screen to complete the setup.

MSN Explorer

button and click

AOL

Internet Explorer

appears.

Set up my connection manually

Use the CD I got from an ISP

Set up my connection manually

icon on the Microsoft® Windows® desktop.

icon on your desktop or if you want to set up an

Choose from a list of Internet

, continue to step 6. Otherwise, follow the

NOTE: If you do not know which type of connection to select, contact your ISP.

Click the appropriate option under

click

Use the setup information provided by your ISP to complete the setup.

How do you want to connect to the Internet?

, and then

If you are having problems connecting to the Internet, see "E-Mail, Modem, and Internet Problems" on page 31. If you cannot connect to the Internet but have successfully connected in the past, the ISP might have a service outage. Contact your ISP to check the service status, or try connecting again later.

Setting Up and Using Your Computer 15

Playing CDs and DVDs

NOTICE: Do not press down on the CD or DVD tray when you open or close it. Keep the tray closed when

you are not using the drive.

NOTICE: Do not move the computer when you are playing CDs or DVDs.

Press the eject button on the front of the drive.

Place the disc, label side up, in the center of the tray.

www.dell.com | support.dell.com

Press the eject button or gently push in the tray.

To format CDs for storing data, to create music CDs, or to copy CDs, see the CD software that came with your computer.

NOTE: Ensure that you follow all copyright laws when you create CDs.

A CD player includes the following basic buttons:

Play

Move backward within the current track

Pau se

Move forward within the current track

Stop

Go to the previous track

16 Setting Up and Using Your Computer

Eject

Go to the next track

A DVD player includes the following basic buttons:

Stop

Restart the current chapter

Play

Fast forward

Pau se

Fast reverse

Advance a single frame while in pause mode

Go to the next title or chapter

Continuously play the current title or chapter

Go to the previous title or chapter

Eject

Help

For more information on playing CDs or DVDs, click

on the CD or DVD player (if available).

Adjusting the Volume

NOTE: When the speakers are muted, you do not hear the CD or DVD playing.

Click the

Volume Control

In the slide it up or down to increase or decrease the volume.

For more information on volume control options, click

Start

button, point to

Volume Control

All Programs → Accessories→ Entertainment

window, click and drag the bar in the

Help

in the

, and then click

Volume Control

Setting Up and Using Your Computer 17

column and

window.

Adjusting the Picture

If an error message notifies you that the current resolution and color depth are using too much memory and preventing DVD playback, adjust the display properties:

Click the

Under

Pick a category

Under

Pick a task...

In the

Display Properties

setting to

Click the drop-down menu under

www.dell.com | support.dell.com

Click OK.

Copying CDs and DVDs

NOTE: Ensure that you follow all copyright laws when you create CDs or DVDs.

This section applies only to computers that have a CD-R, CD-RW, DVD+RW, DVD+R, or DVD/CD-RW combo drive.

NOTE: The types of CD or DVD drives offered by Dell may vary by country.

The following instructions show how to make an exact copy of a CD or DVD. You can also use Sonic RecordNow for other purposes, including creating CDs from audio files on your computer and creating MP3 CDs. For instructions, see the Sonic RecordNow documentation that came with your computer. Open Sonic RecordNow, click the question mark icon in the upper-right corner of the window, and then click

Start

button and click

, click

window, click and drag the bar in

800 by 600 pixels

RecordNow Help

Control Panel

Appearance and Themes

Change the screen resolution

Color quality

, and then click

RecordNow Tutorial

Screen resolution

Medium (16 bit)

to change the

How to Copy a CD or DVD

NOTE: If you have a DVD/CD-RW combo drive and you experience recording problems, check for

available software patches at the Sonic support website at support.sonic.com.

Currently, five DVD-writable disc formats are available: DVD+R, DVD+RW, DVD-R, DVD-RW, and DVD-RAM. The DVD-writable drives installed in Dell™ computers can write to DVD+R and DVD+RW media, and can read DVD-R and DVD-RW media. However, DVD-writable drives do not write to and might not read DVD-RAM media. In addition, commercially available DVD players for home theater systems might not read all five formats.

NOTE: Most commercial DVDs have copyright protection and cannot be copied using Sonic

RecordNow.

Click the

RecordNow!

Click either the audio tab or the data tab, depending on the kind of CD or DVD you want to copy.

18 Setting Up and Using Your Computer

Start

button, point to

All Programs→

Sonic→ RecordNow!

, and then click

Click

Exact Copy

To copy the CD or DVD:

If you have one CD or DVD drive

• computer reads your source CD or DVD and copies it to a temporary folder on your computer hard drive.

When prompted, insert a blank CD or DVD into the CD or DVD drive and click

, ensure that the settings are correct and click

Copy

. The

If you have two CD or DVD drives

• source CD or DVD and click the blank CD or DVD.

Once you have finished copying the source CD or DVD, the CD or DVD that you have created automatically ejects.

, select the drive into which you have inserted your

Copy

. The computer copies the data on the CD or DVD to

Using Blank CD-Rs and CD-RWs

Your CD-RW drive can write to two different types of recording media: CD-Rs and CD-RWs (including high-speed CD-RWs). Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you cannot write to that CD-R again (see the Sonic documentation for more information). Use blank CD-RWs to write to CDs or to erase, rewrite, or update data on CDs.

Your DVD-writable drive can write to four different types of recording media: CD-Rs, CD-RWs (including high-speed CD-RWs), DVD+Rs, and DVD+RWs. Blank DVD+Rs can be used to permanently store large amounts of information. After you create a DVD+R disc, you may not be able to write to that disc again if the disc is "finalized" or "closed" during the final stage of the disc creation process. Use blank DVD+RWs if you plan to erase, rewrite, or update information on that disc later.

Helpful Tips

• Use Microsoft® Windows® Explorer to drag and drop files to a CD-R or CD-RW only after you start Sonic RecordNow and open a RecordNow project.

• You must use CD-Rs to burn music CDs that you want to play in regular stereos. CD-RWs do not play in most home or car stereos.

• You cannot create audio DVDs with Sonic RecordNow.

• Music MP3 files can be played only on MP3 players or on computers that have MP3 software installed.

• Do not burn a blank CD-R or CD-RW to its maximum capacity; for example, do not copy a 650-MB file to a 650-MB blank CD. The CD-RW drive needs 1 or 2 MB of the blank CD to finalize the recording.

Setting Up and Using Your Computer 19

• Use a blank CD-RW to practice CD recording until you are familiar with CD recording techniques. If you make a mistake, you can erase the data on the CD-RW and try again. You can also use blank CD-RWs to test music file projects before you record the project permanently to a blank CD-R.

• See the Sonic support website at

Using a Media Card Reader (Optional)

Use the Media Card Reader to transfer data directly to your computer.

The Media Card Reader supports the following memory types:

www.dell.com | support.dell.com

•xD-Picture Card

• SmartMedia (SMC)

• CompactFlash Type I and II (CF I/II)

• MicroDrive Card

• SecureDigital Card (SD)

• MultiMediaCard (MMC)

• Memory Stick (MS/MS Pro)

support.sonic.com

for additional information.

20 Setting Up and Using Your Computer

For information on installing a Media Card Reader, see "Installing a Media Card Reader" on page 95.

Memory Stick

xD-Picture Card and SmartMedia (SMC)

CompactFlash Type I and II (CF I/II) and MicroDrive Card

SecureDigital Card (SD)/ MultiMediaCard (MMC)

(MS/MS Pro)

To use the Media Card Reader:

Check the media or card to determine the proper orientation for insertion.

Slide the media or card into the appropriate slot until it is completely seated in the connector.

If you encounter resistance, do not force the media or card. Check the card orientation and try again.

Connecting Two Monitors

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

NOTE: If you are connecting two monitors that have VGA connectors, you must have the optional DVI

adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector. If you are connecting a television, you may connect only one monitor (VGA or DVI) in addition to the television.

Setting Up and Using Your Computer 21

If you purchased a graphics card that supports dual monitors, follow these instructions to connect and enable your monitors. The instructions tell you how to connect either two monitors (each with a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or aTV.

Connecting Two Monitors With VGA Connectors

Follow the procedures in "Before You Begin" on page 55.

Connect one of the monitors to the VGA (blue) connector on the back of the computer.

Connect the other monitor to the optional DVI adapter and connect the DVI adapter to the DVI (white) connector on the back of the computer.

www.dell.com | support.dell.com

optional DVI adapter

Connecting One Monitor With a VGA Connector and One Monitor With a DVI Connector

Follow the procedures in "Before You Begin" on page 55.

Connect the VGA connector on the monitor to the VGA (blue) connector on the back of the computer.

Connect the DVI connector on the other monitor to the DVI (white) connector on the back of the computer.

DVI (white) connector

TV-OUT connector

VGA (blue) connector

22 Setting Up and Using Your Computer

Connecting a TV

NOTE: To connect a TV to your computer, you must purchase an S-video cable, which is available at

most consumer electronics stores. An S-video cable is not included with your computer.

Follow the procedures in "Before You Begin" on page 55.

Connect one end of the S-video cable to the TV-OUT connector on the back of the computer.

Connect the other end of the S-video cable to the S-video input connector on your TV.

Connect the VGA or DVI monitor.

Changing the Display Settings

After you connect the monitor(s) or TV, turn on the computer.

The Microsoft

Enable clone mode or extended desktop mode in the display settings.

• In clone mode, both monitors display the same image.

• In extended desktop mode, you can drag objects from one screen to the other, effectively doubling the amount of viewable work space.

For information on changing the display settings for your graphics card, see the user’s guide in the Help and Support Center (click the

guides

, click

Windows® desktop displays on the primary monitor.

Device guides

Start

button, click

Help and Support

, click

, and then click the guide for your graphics card).

User and system

Setting Up and Using Your Computer 23

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTICE: Plug the network cable into the network adapter connector on the computer. Do not plug the

network cable into the modem connector on the computer. Do not plug a network cable into a telephone wall jack.

Connect the network cable to the network adapter connector on the back of your computer.

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

Connect the other end of the network cable to a network device.

www.dell.com | support.dell.com

network adapter connector

network adapter connector on computer

Network Setup Wizard

The Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet connection between computers in a home or small office.

Click the click

Network Setup Wizard

On the welcome screen, click

Click

Checklist for creating a network

Start

button, point to

network device

network cable

All Programs→ Accessories→ Communications

, and then

NOTE: Selecting the connection method This computer connects directly to the Internet enables the

integrated firewall provided with Windows XP Service Pack.

Complete the checklist and required preparations.

Return to the Network Setup Wizard and follow the instructions on the screen.

24 Setting Up and Using Your Computer

Power Management

The Microsoft® Windows® XP power management features can reduce the amount of electricity your computer uses when it is on and you are not using it. You can reduce power to just the monitor or the hard drive, or you can use standby mode or hibernate mode to reduce power to the entire computer. When the computer exits from a power conservation mode, the Windows desktop is restored to the state it was in before it entered the mode.

NOTE: Windows XP Professional includes security and networking features not available in

Windows XP Home Edition. When a Windows XP Professional computer is connected to a network, different options related to security and networking appear in certain windows.

Standby Mode

Standby mode conserves power by turning off the display and the hard drive after a time-out. When the computer exits from standby mode, it returns to the operating state it was in before it entered standby mode.

To set standby mode to automatically activate after a defined period of inactivity:

Click the

Under

To immediately activate standby mode without a period of inactivity, click the

Turn Off Computer

To exit from standby mode, press a key on the keyboard or move the mouse.

Start

button and click

Pick a category

or pick a Control Panel icon

, click

, and then click

Control Panel

Performance and Maintenance

Stand by

, click

Power Options

Start

button, click

NOTICE: If your computer loses power while in standby mode, it may lose data.

Hibernate Mode

Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then completely turning off the computer. When the computer exits from hibernate mode, the desktop is restored to the state it was in

To activate hibernate mode:

Click the

Under

Define your hibernate settings on the Power

To exit from hibernate mode from hibernate mode. Pressing a key on the keyboard or moving the mouse does not bring the computer out of hibernation, because the keyboard and the mouse do not function when the computer is in hibernate mode.

Start

button and click

Pick a category

or pick a Control Panel icon

, click

press the power button. The computer may take a short time to exit

before it entered hibernate mode.

Control Panel

Performance and Maintenance

, click

Power Options

Schemes

tab,

Advanced

tab, and

Setting Up and Using Your Computer 25

Hibernate

tab.

Because hibernate mode requires a special file on your hard drive with enough disk space to store the contents of the computer memory, Dell creates an appropriately sized hibernate mode file before shipping the computer to you. If the computer’s hard drive becomes corrupted, Windows XP recreates the hibernate file automatically.

Power Options Properties

Define your standby mode settings, hibernate mode settings, and other power settings in the

Options Properties

Click the

Under

Pick a category

Under

www.dell.com | support.dell.com

Power Schemes Tab

Each standard power setting is called a scheme. If you want to select one of the standard Windows schemes installed on your computer, choose a scheme from the The settings for each scheme appear in the fields below the scheme name. Each scheme has different settings for starting standby mode or hibernate mode, turning off the monitor, and turning off the hard drive.

The

Power schemes

•

If you want to change the default settings for a scheme, click the drop-down menu in the

monitor

out from the displayed list. Changing the time-out for a scheme field permanently changes the default settings for that scheme, unless you click scheme.

or pick a Control Panel icon

Define your power settings on the Power

Always On

Home/Office Desk

minimal power conservation.

Presentation

conservation).

Minimal Power Management

conservation.

Max Battery

batteries for extended periods of time.

Turn off hard disks, System stand by

window. To access the

Start

button and click

, click

Performance and Maintenance

Power Options Properties

Control Panel

, click

Power Options

Schemes

tab,

window:

Advanced

tab, and

Power schemes

Hibernate

drop-down menu.

drop-down menu displays the following schemes:

(default) — If you want to use your computer with no power conservation.

— If you use your computer as a home or office computer and you require

— If you want your computer to run without interruption (using no power

— If you want your computer to run with minimal power

— If your computer is a portable computer and you run your computer from

, or

System hibernates

Save As

and enter a new name for the changed

field, and then select a time-

Power

tab.

Tur n of f

NOTICE: If you set the hard drive (hard disk) to time-out before the monitor does, your computer may

appear to be locked up. To recover, press any key on the keyboard or click the mouse. To avoid this problem, always set the monitor to time-out before the hard drive.

26 Setting Up and Using Your Computer

Advanced Tab

The

Advanced

• Place the power options icon in the Windows taskbar for quick access.

• Set the computer to prompt you for your Windows password before the computer exits from standby mode or hibernate mode.

• Program the power button to activate standby mode, activate hibernate mode, or turn off the computer.

To program these functions, click an option from the corresponding drop-down menu and click

Hibernate Tab

The

Hibernate

you defined on the

Hibernate

For more information on power management options:

Click the

In the

tab allows you to:

tab allows you to enable hibernate mode. If you want to use the hibernate settings

Power Schemes

tab.

Start

button and click

Help and Support

Performance and maintenance

tab, click the

Help and Support

window, click

Enable hibernate support

Performance and maintenance

window, click

Conserving power on your computer

check box on the

IEEE 1394

IEEE 1394 is a digital interface that can move large amounts of data between computers and peripheral devices. IEEE 1394 is ideal for use with multimedia devices because it speeds the transfer of data and large files, which enables a computer to connect directly to devices such as digital video cameras.

NOTE: The connector can accept 4-pin IEEE 1394 devices with the use of an adapter.

Your computer may have an optional front IEEE 1394 connector (see "Front View of the Computer" on page 57). This connector is only available if you purchased an add-in card that uses IEEE 1394. To purchase a card, contact Dell.

Setting Up and Using Your Computer 27

Hyper-Threading

Hyper-Threading is an Intel® technology that can enhance overall computer performance by allowing one physical processor to function as two logical processors, capable of performing certain tasks simultaneously. It is recommended that you use the Microsoft (SP1) or later operating system because Windows XP is optimized to take advantage of Hyper-Threading technology. While many programs can benefit from Hyper-Threading, some programs have not been optimized for Hyper-Threading and may require an update from the software manufacturer. Contact the software manufacturer for updates and information about using Hyper-Threading with your software.

To determine if your computer is using Hyper-Threading technology:

www.dell.com | support.dell.com

Click the

Click

Hardware

In the

Device Manager

is enabled, the processor is listed twice.

You can enable or disable Hyper-Threading through system setup. For more information on accessing system setup, see page 108. For more information on Hyper-Threading, search the Knowledge Base on the Dell Support website at

Start

button, right-click

and click

My Computer

Device Manager

window, click the plus (+) sign next to

, and then click

support.dell.com

Windows® XP Service Pack 1

Properties

Processors

. If Hyper-Threading

28 Setting Up and Using Your Computer

Solving Problems

Troubleshooting Tips

Follow these tips when you troubleshoot your computer:

• If you added or removed a part before the problem started, review the installation procedures and ensure that the part is correctly installed.

• If a peripheral device does not work, ensure that the device is properly connected.

• If an error message appears on the screen, write down the exact message. This message may help technical support personnel diagnose and fix the problem(s).

• If an error message occurs in a program, see the program’s documentation.

• If you cannot boot into your operating system after you have changed your SATA operation settings, restore your previous SATA operation settings and retry booting into the operating system.

Battery Problems

CAUTION: There is a danger of a new battery exploding if it is incorrectly installed. Replace the

battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

REPLACE THE BATTERY — If you have to repeatedly reset time and date information after turning on

the computer, or if an incorrect time or date displays during start-up, replace the battery (see page 101). If the battery still does not work properly, contact Dell (see page 119).

Solving Problems 29

Drive Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

ENSURE THAT MICROSOFT® WINDOWS® RECOGNIZES THE DRIVE — Click the Start button and

click My Computer. If the floppy, CD, or DVD drive, is not listed, perform a full scan with your antivirus software to check for and remove viruses. Viruses can sometimes prevent Windows from recognizing the drive.

TEST THE DRIVE —

www.dell.com | support.dell.com

• Insert another floppy, CD, or DVD to eliminate the possibility that the original one is defective.

• Insert a bootable floppy and restart the computer.

CLEAN THE DRIVE OR DISK — See page 116.

CHECK THE CABLE CONNECTIONS

RUN THE HARDWARE TROUBLESHOOTER — See page 52.

RUN THE DELL DIAGNOSTICS — See page 48.

CD and DVD drive problems

NOTE: High-speed CD or DVD drive vibration is normal and may cause noise, which does not indicate a

defect in the drive or the CD or DVD.

NOTE: Because of different regions worldwide and different disc formats, not all DVD titles work in all

DVD drives.

ADJUST THE WINDOWS VOLUME CONTROL —

• Click the speaker icon in the lower-right corner of your screen.

• Ensure that the volume is turned up by clicking the slidebar and dragging it up.

• Ensure that the sound is not muted by clicking any boxes that are checked.

CHECK THE SPEAKERS AND SUBWOOFER — See "Sound and Speaker Problems" on page 41.

30 Solving Problems

+ 110 hidden pages