Dell Axim X3 User Manual [zh]

Dell

0G2511A01

™

Axim™X3

Features

| |

NOTICE: First charge the battery for
at least 8 hours.

5

6

7

8

9

4

3

2

1

10

11

14

15

13

12

CAUTION:

Before you set up and
operate your device, read and follow
the safety instructions in the System
Information Guide.

1. scroll dial

2. headphone connector

3. touch screen

4. microphone

5. infrared sensor

6. Secure Digital card slot

7. power button

8. wireless antenna (optional)

9. stylus (extended)

10. battery lock

11. battery

12. reset button

13. speaker

14. wireless or Windows

Player on/off button

15. Home button

16. Inbox button

17. navigator button

18. Contacts button

19. Calendar button

20. record button

®

Media

®

16

17

19

18

20

1

NOTICE: While charging your device
for the first time, you
power button to charge the backup
battery.

NOTICE: Do not connect your device to
the computer until the instructions
prompt you to do so.

Charge the Battery First

mmuusstt

press the

| |

1. Install the battery.

2. Connect the AC adapter and

1

charge the device for at least 8
hours.

3. After the battery is charged, press

the power button. Follow the
instructions on the screen.

2

2

NOTICE: Do not connect your device to
the computer until the instructions
prompt you to do so.

Install Microsoft®ActiveSync

®

| |

Use Microsoft ActiveSync to
synchronize the data on your device
with the data on your computer.

1. Insert the Dell Companion CD.

2. Click the yellow triangle and click

Start Here.

3. Install and configure Microsoft

Outlook only if it is not already
installed and configured on your
computer and you do not have a
more recent version.

4. Click Install ActiveSync xx.xx,

click Install, and then follow
the instructions on the screen.

5. When prompted, use the

instructions on the reverse side
to connect your device.

See ActiveSync Help on your
computer for more information.

www.dell.com | support.dell.com

3

Connect the Sync Cable OR the Cradle

| |

Sync cable

Connect the USB connector on
the end of the sync cable to your
computer.

OR | | |

Docking With
the Cradle

Keep the front of the
device flush with the
front of the cradle, and
lower the device until
it is firmly seated in
the cradle. When the
device is docked, the
DELL logo on the
cradle lights up and
the connection status
icon appears on the
command bar.

Cradle cable

Connect the USB connector on
the end of the cradle cable to your
computer.

4

Additional Information

• Rotate the scroll dial to
move the cursor and press
in to perform actions
similar to pressing
<Enter> on a keyboard.

• To adjust the brightness,
press and hold the scroll
dial and press the top or
bottom of the navigator
button.

• To dim the display, press
and hold the power
button. Repeat to light
the display.

| |

Finding Information

• Dell User's Guide — Setting
up and using your device.

• Microsoft Pocket PC
Help — Tap Start→→Help.

• Dell Companion CD —
Additional programs that
you can install.

• ActiveSync Help — Click

Help→→Microsoft
ActiveSync Help on your

computer.

Information in this document is subject to change without notice.
© 2003–2004 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden.

Dell, the DELL logo, and Axim are trademarks of Dell Inc.; Microsoft, Windows, Media,
and ActiveSync are registered trademarks of Microsoft Corporation. Dell disclaims
proprietary interest in the marks and names of others.

February 2004

Printed on recycled paper

Printed in China