The Dell OptiPlex 780-USFF All-in-One Stand is a unique
mounting solution with integrated cable management
designed to adapt to your unique environment.
Hazard Symbols Review
A
These symbols alert the user about a safety condition that demands attention. All users of the
product should be able to recognize and understand the significance of the following safety
hazards if encountered on the product or within product documentation.
Symbol Signal Word Level of Hazard
NOTE
CAUTION
WARNING
A NOTE indicates important information that helps you make
better use of your Dell AIO Stand.
A CAUTION indicates potential damage to hardware or loss of
data and tells you how to avoid the problem.
WARNING indicates a potential for property damage, personal
injury, or death.
An ELECTRICAL indicates an impending electrical hazard
ELECTRICAL
which, if not avoided, may result in personal injury, fire and/or
death.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictl y forbidden.
Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or
their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
equipment damage, the AIO Stand must be
placed on a level, stable surface.
6/15
Determine which monitor cable will be used (VGA or DisplayPort), and follow appropriate
2
instructions.
Locate the provided VGA cable.
a
VGA
Route the VGA cable through the cable tray.
b
DisplayPort
Locate the system-end of the cable in the cable tray.
a
Remove the front cable cover to locate the monitor-end of the cable.
b
7/15
Attach the monitor to the AIO stand.
3
Connect the power plug, the monitor cable (VGA or DisplayPort), and the USB cable to the
4
monitor.
DisplayPort
8/15
Route the accessory cable (keyboard, mouse, speakers, etc.) through the cable tray.
5
Ensure the system sleeve is unlocked (orange tab will show).
6
9/15
7
Extend the system label carrier.
a
If applicable, remove mylar from front surface(s) of chassis prior to sleeve installation.
b
Insert the system into the system sleeve in the orientation illustrated below.
CAUTION:
Do not reverse the
insertion orientation!
Slide the switch to lock the system sleeve.
8
NOTE:When inserted
properly , the CD end of
the system will reach
the end of the system
sleeve.
10/15
Ensure the AIO stand is unlocked (orange tab will show).
9
Slide the system sleeve onto the back of the AIO stand. Ensure that the cables do not
10
impede the sleeve from fully seating onto the stand.
11/15
Connect the monitor cable (VGA or DisplayPort), power plug, network cable and any
11
accessory cables, (keyboard, mouse, speaker, etc.) to the rear of the system.
12
Slide the lock switch out to unlock the cable cover. With the system label carrier
Slide the switch to lock the cable cover.
a
extended, attach the cable cover underneath the label carrier and to the system sleeve.
Then push the system label carrier back to reveal the cable cover lock switch.
b
12/15
Slide the switch to lock the AIO stand.
13
Attach customer-supplied security accessories.
14
NOTE:These security features are only accessible when the AIO S t and lock is engaged as shown
in Step 13.
13/15
15
Connect your facility network cable to the rear of the AIO stand to access the facility
a
network.
Connect the power cord supplied with the system to the rear of the AIO Stand and to
Height 15 inches (380 mm)
Depth 9.6 inches (245 mm)
Width 10.8 inches (275 mm)
Weight 8.0 lbs (3.7 kg)
* not including monitor and system
Monitor and System Weight Capacities
Dell Monitor: P190S/1909W/P2210 ≦ 10.1 lbs (4.6 kg)
Dell System: OptiPlex 780-USFF ≦ 7 lbs (3.2 kg)
Temperature
Operating 32oF to 95℉ (0oC to35oC)
Storage
Transportation
Power Ratings
Input 100-120 V~, 50/60 HZ, 3.5 A
220-240 V~, 50/60 HZ, 1.75 A
Output - Monitor Port 100-120 V~, 50/60 HZ, 1.5 A
220-240 V~, 50/60 HZ, 0.75 A
Computer Port 100-120 V~, 50/60 HZ, 2.0 A
220-240 V~, 50/60 HZ, 1.0 A
Security Features
Kensington Security Slot Accepts standard Kensington Slim MicroSaver
Padlock Ring Accepts Padlocks with shaft diameter of 3 - 8 mm
Finding Information
If you need to:
Find safety best practices information for your computer,
review Warranty information, Terms and Conditions (U.S.
only), Safety instructions, Regulatory information,
Ergonomics information, and End User Agreement.
-40
-40
o
F to149℉ (-40oC to+69oC)
o
F to149℉ (-40oC to+69oC)
See:
The safety and regulatory documents that shipped with
your computer and the Regulatory Compliance
Homepage at www.dell.com/regulatory_compliance
3
.
15/15
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.