Dell 5330dn User Manual

Statement of Volatility – Dell 5330dn

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.

A Dell 5330dn Mono Laser Printer contains both volatile and non-volatile (NV) components. Volatile
components lose their data immediately after power is removed from the component. Non-volatile (NV)
components continue to retain their data even after power is removed from the component. The following
NV components are present on the system board.

Table 1. List of Volatile and Non-Volatile Components on System Board

Mono Laser

Products

5330dn

Memory
Application

Usage
Statistics,

Memory

Size

SIZE NOT
AVAILABLE

Memory Type

Volatile/ Non-

Volatile

EEPROM Non-Volatile No

Configuration

Firmware
(Code)

SIZE NOT
AVAILABLE

FLASH Non-Volatile No

Base Memory 256 MB DDR2-SDRAM Volatile Yes

Optonal

512 MB DDR2-SDRAM Volatile Yes

Memory

Toner SIZE NOT

NVRAM Non-Volatile No

AVAILABLE

Drum NA NA Volatile No

Fuser NA NA Volatile No

User Data

CAUTION: All other components on the motherboard will lose data if power is removed from the system. Primary
power loss (unplugging the power cord) will cause user data on the memory to be lost.

Notes

:

• EEROM may be used and could contain user data.

• User Data utilized by memory type.

Optional Hard
Disk

80 GB HDD Non-Volatile Yes

_____________

Copyright © 2014 Dell Inc. All rights reserved.

This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks of
Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their
respective companies.

February 2014