Delfield ST4460N-8 User Manual

ST4460 Salad Top
Front-Breathing Self-Contained Salad Top Refrigerated Bases
Models
• ST4460N-8 Two section with doors, eight pan capacity
• STD4460N-8 Two section with drawers, eight pan capacity
Standard Features
• Patented air screen ensures product stays cold without drying it out
• All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
• Durable, rugged stainless steel sides, top and front
• Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
• Delfield supplies 1/6 size pans and positive placement adapter bars for top opening
• Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature
STD4460N-8
holding performance
• Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board treated with antimicrobial agent
• “D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
Warming Potential) polyurethane keeps energy costs low
• Black recessed quick grip handle
• Standard on 5” casters for easy
cleaning and installation
• 6’ cord and plug supplied
• One epoxy coated wire shelf standard,
installed per door section
• ACT solid state electronic control
• "ST" models have a 4" stainless steel
backsplash
• One year parts and 90 day labor standard warranty
Options & Accessories
• Flat lift off cover
• 18” wide single tier overshelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• 3” casters, 3.75” ride height
• Door lock (solid door models only)
• Exterior thermometer (solid door
models only)
• Glass door(s)
• 220V/50 Hertz electrical system*
* Inclusion of this option will alter
electrical specifications of the unit
ST4460 Salad Top: Front-Breathing Self-Contained Salad Top Refrigerated Bases
Specifications
Exterior top is one-piece 22-gauge stainless steel with integral
Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance.
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coils are located on the interior rear wall of the cabinet. Refrigerant flow is
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control: ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm).
The following applies to two door models only. Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf per door opening.
The following applies to four drawer models only. Drawer fronts have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Each section has two drawers. Each top drawer holds one full size 12” x 20” (30.5cm x 50.8cm) pan, three 1/9 size and three 1/6 size 4”-6” (10.2cm -15.2cm) deep pans. Each bottom drawer holds one 12” x 20” (30.5cm x
50.8cm) pan, three 1/9 size and three 1/6 size 4” (10.2cm) deep pans. Pans supplied by others.
www.delfield.com
30.66" [77.88]
TO EDGE OF DOOR
NOSE OF UNIT
INTERIOR DIMENSION
55.75" [141.61]
DOOR WIDTH DIMENSION
25.94" [65.89]
2.24
21.63
13.63
26.25
1.69
64.13
33.08
1.39
3.13
12.96
13.63
64.13
2.04
2.42
28.63
12.96
13.63
4.96
60.13
13.63
3.13
21.63
64.13
21.63
13.63
2.74
4.96
1.39
21.63
1.31
STANDARD PAN CONFIGURATIONS
72.1372.13 72.1372.13 72.13
ALT. SHELF
SHELF
2.50" [6.30]
30.66" [77.88]
TO EDGE OF DOOR
NOSE OF UNIT
INTERIOR DIMENSION
55.75" [141.61]
DOOR WIDTH DIMENSION
25.94" [65.89]
21.94" [55.73]
26.86" [68.22]
20.75" [52.70]
6.11" [15.52]
7.53" [19.10]
12.98" [33.00]
17.35" [44.08]
23.79" [60.43]
9.72 [24.69]
31.50" [80.01]
29.55" [75.1]
1.19 [3.02]
1.00”
[2.5cm]
6.06”
[15cm]
9.72“
[25cm]
TO EDGE OF DRAWER
NOSE OF UNIT
19.60" [49.78]
TO EDGE OF DRAWER
NOSE OF UNIT
19.60" [49.78]
2.50" [6.30]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
9.72 [24.69]
31.50" [80.01]
29.55" [75.1]
1.19 [3.02]
6.06” [15cm]
9.72“
[25cm]
1.00”
[2.5cm]
60.13
28.63
13.63
2.53 [6.43]
6.14 [15.61]
Front-Breathing Self-Contained Salad Top Refrigerated Bases
2.53 [6.43]
6.14 [15.61]
12.96
Pan Cutout Conguration
ST4460N-8 Elevation View
60.13" [152.72]
60.13" [152.72]
27.78 [70.55]
27.78 [70.55]
28.37
31.50" [80.01]
33.59" [85.31]
4.00" [10.20]
33.59" [85.31]
4.00" [10.20]
36.00" [91.40]
36.00" [91.40]
23.79" [60.43]
12.98" [33.00]
1.00”
[2.5cm]
9.72 [24.69]
1.00”
[2.5cm]
26.86" [68.22]
ALT. SHELF
17.35" [44.08]
7.53" [19.10]
SHELF
6.11" [15.52]
ST4460N-8 Right Side View
31.50" [80.01]
29.55" [75.1]
9.72 [24.69]
29.55" [75.1]
20.75" [52.70]
21.94" [55.73]
1.19 [3.02]
[15cm]
1.19 [3.02]
9.72“
[25cm]
6.06”
[15cm]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
6.06”
2.50" [6.30]
[25cm]
9.72“
25.94" [65.89]
DOOR WIDTH DIMENSION
55.75" [141.61]
INTERIOR DIMENSION
ST4460N-8 ISO View
30.66" [77.88]
NOSE OF UNIT
TO EDGE OF DOOR
NOSE OF UNIT TO EDGE OF DRAWER
19.60" [49.78]
STD4460N-8 Elevation View
2.50" [6.30]
STD4460N-8 Right Side View
STD4460N-8 ISO View
INSTALLATION NOTE:
Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties.
Specifications
Model
Pan Cap.
ST4460N-8
STD4460N-8
ST4460 Salad Top
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
1/6 Size
8 2 7.19ft
8 N/A N/A 20.20ft
# of
Shelves
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Shelf
Area
2
Volume H.P. V/Hz/Ph Amps
3
20.20ft
1/2 115/60/1 12.0 5-15P 411lbs/186kg
3
1/2 115/60/1 12.0 5-15P 495lbs/225kg
Printed in the U.S.A. DSST4460N-S 04/11
Nema
Plug
Ship Weight
Loading...