Delfield ST4460N User Manual

ST4460N Flat Top
Front-Breathing Self-Contained Flat Top Refrigerated Bases
Models
• ST4460N Two section refrigerator, flat top with doors
• STD4460N Two section refrigerator, flat top with drawers
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
ST4460N Flat Top: Front-Breathing Self-Contained Flat Top Refrigerated Bases
ST4460N
Specifications
Exterior top is one-piece, 22-gauge stainless steel with integral
width and 4” (10cm) tall.
Exterior back and bottom are two-piece 24-gauge galvanized
steel. Exterior ends are stainless steel.
Interior sides of door models are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoformed ABS plastic. Base is fully insulated with
high-density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and condensate evaporator
mounted on rear of the cabinet. Evaporator coils are located
on the interior rear wall of the cabinet. Refrigerant flow is
controlled by a capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).
Standard Features
• All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
• Durable, rugged stainless steel sides, top and front
• Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
• Heavy duty self-closing hinges
• “ST” prefix models have a 4” stainless steel
backsplash
• “D” prefix models feature Delfield’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
• Black recessed quick grip handle
• Standard on 5” casters for easy cleaning and
Electromechanical control is mounted on the right side of
the evaporator housing inside the cabinet. It allows the unit to
maintain consistent temperatures in heavy duty conditions.
Electrical connections are 115 volt, 60 Hertz, single phase.
Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 5” (13cm) diameter plate
casters with front two locking. Equipment clearance above the
floor is 2.5” (6cm).
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Drawers have a 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Drawer units have two drawers. Top
drawer holds one 12” x 20” (30.5cm x 50.8cm), three 1/9 size
and three 1/6 size 4"-6" (10.2cm-15.2cm) deep pans. Bottom
drawer holds one 12" x 20", three 1/9 size and three 1/6 size 4"
deep pans. Pans are supplied by others.
installation
• 60-cycle single phase electrical system
• 6’ cord and plug supplied
• One epoxy coated wire shelf standard,
installed per door section
• Electromechanical control
• One year parts and 90 day labor
standard warranty
Options & Accessories
• 18” wide single tier overshelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• 3” casters, 3.75” ride height
• Door lock (solid door models only)
• Exterior thermometer (solid door
models only)
• Interior lights
• Glass door(s)
• 220V/50 Hertz electrical system*
* Inclusion of this option will alter
electrical specifications of the unit
Only
Model ST4460N
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
www.delfield.com
ALT. SHELF
SHELF
31.50" [80.00]
29.55 [75.10]
2.50" [6.30]
30.66" [77.88] TO EDGE OF DOOR
NOSE OF UNIT
INTERIOR DIMENSION
55.75" [141.61]
DOOR WIDTH DIMENSION
25.94" [65.89]
60.13" [152.72]
21.94" [55.73]
26.86" [68.22]
20.75" [52.70]
6.11" [15.52]
7.53" [19.10]
12.98" [33.00]
17.35" [44.08]
23.79" [60.43]
30.66" [77.88] TO EDGE OF DOOR
NOSE OF UNIT
INTERIOR DIMENSION
55.75" [141.61]
DOOR WIDTH DIMENSION
25.94" [65.89]
33.59" [85.31]
4.00" [10.20]
36.00" [91.40]
23.79" [60.43]
12.98" [33.00]
7.53" [19.10]
17.35" [44.08]
6.11" [15.52]
26.86" [68.22]
ALT. SHELF
SHELF
31.50" [80.00]
29.55 [75.10]
21.94" [55.73]
20.75" [52.70]
2.50" [6.30]
Front-Breathing Self-Contained Flat Top Refrigerated Bases
25.94" [65.89]
DOOR WIDTH DIMENSION
55.75" [141.61]
INTERIOR DIMENSION
ST4460N ISO View
ST4460N Elevation View
NOSE OF UNIT
30.66" [77.88] TO EDGE OF DOOR
60.13" [152.72]
33.59" [85.31]
4.00" [10.20]
36.00" [91.40]
ST4460N Right Side View
STD4460N ISO View
31.50" [80.01]
29.55" [75.1]
NOSE OF UNIT
19.60" [49.78]
TO EDGE OF DRAWER
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
STD4460N Elevation View STD4460N Right Side View
INSTALLATION NOTE:
Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties.
Specifications
Model
ST4460N
STD4460N
ST4460N Flat Top
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
# of
Shelves
2 7.19ft
NA NA 20.20ft
Shelf
Area
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Volume H.P. V/Hz/Ph Amps
2
20.20ft
3
1/5 115/60/1 3.9 5-15P 411lbs/186kg
3
1/5 115/60/1 3.9 5-15P 495lbs/225kg
Printed in the U.S.A. DSST4460N 01/11
Nema
Plug
2.50" [6.30]
Ship Weight
Energy
KWH/Day
2.75
NA
Loading...