Delfield SSRS, SMRS-S User Manual

®
Specication Line®
Self-Contained Solid Door Shallow Reach-In Refrigerator
Models
One section Two section Three section
SSR1S-S SSR2S-S SSR3S-S Stainless exterior and interior full door
SSR1S-SH SSR2S-SH SSR3S-SH Stainless exterior and interior half door
SAR1S-S SAR2S-S SAR3S-S Stainless exterior and aluminum interior full door
SAR1S-SH SAR2S-SH SAR3S-SH Stainless exterior and aluminum interior half door
SMR1S-S SMR2S-S SMR3S-S Stainless front aluminum exterior and interior full door
SMR1S-SH SMR2S-SH SMR3S-SH Stainless front aluminum exterior and interior half door
Specication Line®: Solid Door Shallow Reach-In Refrigerator
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
SSR2S-SH
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed oor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters axed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal
Standard Features
Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front (SM)
• Built in door locks with heavy duty strikes
• Recessed metal door handle
• Pressure relief valve is standard to prevent door
• vapor lock Exterior digital thermometer with high/low
• temperature alarm Easy to use electronic control
• Easy access “ip up” shroud
• Three wire shelves per section - SA/SS standard
• with chrome plated shelves and SM standard with epoxy coated shelves Tough ABS interior door liners
• 10’ attached cord and plug on 115V units
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
• High density foamed in place environmentally
• friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low Energy savings door heater switch
• Two year parts & labor warranty
• Five year compressor warranty
door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.
Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Deleld’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum eciency. Evaporator condensate is eliminated using an energy ecient hot gas system.
Electrical: Standard electrical on one and two section units shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Three section units shall be 115/208-230 and will require hardwire connections.
Options & Accessories
Security (prison) package 6” polyurethane casters Door eld rehingability Stainless steel interior door liner Additional shelves Tray slides Stainless steel back Laminate on front, sides and back Bottom mount electrical Stainless steel banking strip Heat shield end Stainless steel kick plate Laminate kick plate 4” stainless steel utility base 230-50-1 electrical 220-60-1 electrical
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619
www.delfield.co m
®
PLAN VIEW
30"
58"
6.12
81.12
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
30.00"
76.2cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
205.0cm
29.00
34.00
56.00
34.00
83.00
34.00
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
75.00”
190.5cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
56.00
34.00
83.00
34.00
83.00
34.00
83.00”
210.8cm
79.00"
200.7cm
34.00”
86.4cm
29.00”
73.7cm
26.00”
66.0cm
56.00”
142.2cm
83.00”
210.8cm
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
26.00”
66.0cm
26.00”
66.0cm
48.00”
121.9cm
44.00"
111.8cm
26.00”
66.0cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
26.00”
66.0cm
26.00”
66.0cm
83.00”
210.8cm
79.00"
200.7cm
26.00”
66.0cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
26.00”
66.0cm
26.00”
66.0cm
48.00”
121.9cm
44.00"
111.8cm
26.00”
66.0cm
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
22.00”
55.9cm
SSR1S-S, SAR1S-S, SMR1S-S
SSR1S-SH, SAR1S-SH, SMR1S-SH
PLAN VIEW
SSR2S-S, SAR2S-S, SMR2S-S
SSR2S-SH, SAR2S-SH, SMR2S-SH
PLAN VIEW
SSR3S-S, SAR3S-S, SMR3S-S
SSR3S-SH, SAR3S-SH, SMR3S-SH
ELEVATION VIEW
SSR1S-S, SAR1S-S,
SMR1S-S
ELEVATION VIEW
SSR1S-SH, SAR1S-SH,
SMR1S-SH
ELEVATION VIEW
SSR2S-S, SAR2S-S, SMR2S-S
ELEVATION VIEW
SSR2S-SH, SAR2S-SH, SMR2S-SH
Self-Contained Solid Do or Shallow Reach-I n Refri gerator
SSR3S-S, SAR3S-S, SMR3S-S
ELEVATION VIEW
ELEVATION VIEW
SSR3S-SH, SAR3S-SH, SMR3S-SH
END VIEW
ALL MODELS
Mechanical Data
STORAGE
CU.FT.
SHELVES SQ.FT.
MODEL NUMBER VOLTAGE AMPS
SSR1S-S, SSR1S-SH, SAR1S-S,
Specication Line®
Deleld reserves the right to make changes to the design or specications without prior notice.
SAR1S1-SH, SMR1S-S, SMR1S-SH
SSR2S-S, SSR2S-SH, SAR2S-S,
SAR2S-SH, SMR2S-S, SMR2S-SH
SSR3S-S, SSR3S-SH, SAR3S-S,
SAR3S-SH, SMR3S-S, SMR3S-SH
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
115 6.8 18.25 12.81 3 1/4 2092
115 7.8 37.96 27.54 6 1/3 2488
115/208-230 7.8 57.57 42.47 9 1/4, 1/3 4580
Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619 www.delfield.co m
NO. OF
SHELVES
Printed in the U.S.A. DSSSRS 06/08
UNIT H.P.
BTU/HR
SYSTEM CAP
SHIP
WEIGHT
396lbs
(180kg)
586lbs
(266kg)
795lbs
(361kg)
NEMA PLUG
5-15P 2.66
5-15P 2.98
N/A N/A
ENERGY
(KWH)
Loading...