Delfield SCSC-36-EF User Manual

PROJECT

ITEM #

QUANTITY DATE

APPROVAL

SCSC-EF

Mobile Self-Contained LiquiTec™ Cold Pan Serving Counters

Short Form Specifications

Exterior Body is constructed of

18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners which are welded in place. All body cutouts are reinforced with 14-gauge galvanized channel supports.

Exterior top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit.

The LiquiTec cold pan has 2-6 die stamped 19.87" x 11.87" (50.5cm x

30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5" drain mainfold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained at 86˚F (30˚C) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation.

Refrigeration system uses HFC-404A refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan pressure control. Unit is wired with a 3-wire, grounded, maximum 10’ (3m) cord and plug. Unit has an on/off switch mounted on the exterior.

Casters: Unit is mounted on 5” (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00” (15.2cm).

Optional Accessories and Modifications:

A) 12” (30.5cm) wide stainless steel

fold-down tray slide

C) 10” (25.4cm) wide three-bar fold-

down tray slide

D) 10” (25.4cm) wide composite fold-

down cutting board

E) 10” (25.4cm) wide stainless steel

fold-down work shelf

F) Line-up interlock device G) Glass-front counter protector H) Two tier display with glass shelves

and sneeze guards

HD) Dual service two tier display with

sneeze guards

I) T hree tier diplay with glass shelve\

and sneeze guards

J) 12” (30.5cm) wide 18-gauge stain-

less steel overshelf

KS) Single service flip-up sneeze guard KD) Double service flip-up sneeze guard L) *Fluorescent light fixtures LI) *Incandescent light fixtures P) Open understorage with shelf Q) *120V/60Hz/1ø, 10 amp conve-

nience outlet with breaker

ST) Stainless steel trim strips U) 14” x 30” (35.6cm x 76.2cm) stain-

less steel end drop shelf

V) 6” (15.2cm) high adjustable stain-

less steel legs

*Inclusion of these options will alter the electrical specifications of unit.

Model SCSC-96-EF

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

SCSC-36-EF

SCSC-96-EF

SCSC-74-EF

SCSC-60-EF

SCSC-50-EF

Isometric

View

SCSC-36-EF

SCSC-96-EF

SCSC-74-EF

SCSC-60-EF

SCSC-50-EF

Plan View

Unit on/off switch

Drain Valve

36.00"

91.44cm

30.00"

76.2cm

SCSC-EF

Mobile Self-Contained LiquiTec™ Cold Pan Serving Counters

50.00" 127cm

96.00"

30.00"

76.2cm

243.84cm

30.00"

76.2cm

60.00"

152.4cm

30.00"

76.2cm

74.00"

187.96cm

30.00"

76.2cm

21.25"

53.97cm

.12"

0.3048cm

36"

91.44cm

1.62.00"

4.11cm

6.00"

15.24cm

1.75"

4.44cm

Mechanical Data — Standard Unit

MODEL VOLTAGE/HERTZ/ NEMA SHIP WEIGHT SYSTEM

NUMBER PHASE AMP H.P. PLUG LBS./KG. BTU

SCSC-36-EF SCSC-50-EF SCSC-60-EF SCSC-74-EF SCSC-96-EF

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

115/60/1 8.0 1/4 5-15P 350/159 1102

115/60/1 8.0 1/4 5-15P 425/193 1240

115/60/1 8.0 1/4 5-15P 500/227 1343

115/60/1 8.0 1/4 5-15P 575/261 1423

115/60/1 8.0 1/4 5-15P 650/295 1487

SSEF 04/02