Delfield SCF-32 Specifications
Free-Standing Self-Contained Ice Cream Dispenser
Short Form Specifications
Exterior sides shall be 20-gauge stainless steel. Top and corner supports shall
be 16-gauge stainless steel, welded, ground and polished into one integral
unit.
Inner liner shall be water-tight and constructed of 22-gauge stainless steel with
a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamedin-place polyurethane insulation with a non-conductive top breaker strip.
Each opening shall have an insulated, stainless steel folding lid with high
impact plastic liner, molded rubber edge and black plastic handles.
(3) stainless steel louvers shall be installed in the end and sides of the cabinet
to allow proper air flow to the condensing unit.
Each self-leveling mechanism shall be field adjustable by adding or removing
stainless steel extension springs in the elevator housing inside the unit. The
elevators shall be connected by removable platform carriers constructed of
18-gauge stainless steel.
(6) anodized aluminum divider trays will be supplied per deep cabinet section.
(2) anodized aluminum divider trays will be supplied for the shallow cabinet
section over the machine compartment. NOTE: See chart on back for ice cream
storage capacity.
Refrigeration system shall use HFC-404A refrigerant. Refrigerant flow shall be
controlled by an expansion valve. Cabinet shall maintain 0°F to 5°F (–18°C to
–15°C) temperature with lids closed for storage.
Refrigeration system shall be controlled by a pressure control, located near
the condensing unit.
Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall have
a 9' (2.7m) long electrical cord and NEMA 5-15P plug.
Unit shall be mounted on 6.00" (15.2cm) high adjustable stainless steel legs.
Optional Accessories and Modifications
• 4.00" (10.2cm) diameter swivel casters (all locking) with corner bumpers
(adds 2.50" [6.4cm] to overall length and depth and reduces overall height
by 1.00" [2.5cm])
• Heavy-duty casters (contact factory)
• Corner bumpers (adds 2.50" [6.4cm] to overall length and depth)
• Wrap-around bumpers (adds 1.75" [4.4cm] to overall length and depth)
• Wire baskets (13.81" x 11.62" x 3.87" [35.1cm x 29.5cm x 9.8cm])
• Laminate panels
• Fiberglass panels
• Lid locking device
• Special voltages (contact factory)voltages (consult factory)
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
SCF
Model SCF-32
shown with optional corner bumpers and casters
NOTE: This equipment is intended for storage and /or display of prepackaged or bottled products only.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
32.50"
82.6cm
28.00"
71.1cm
D=DRAIN
14.00"
35.6cm
16.25"
41.3cm
D
48.00"
121.9cm
28.00"
71.1cm
D=DRAIN
14.00"
35.6cm
24.00"
61.0cm
D
6.00"
15.2cm
37.00"
94.0cm
6.00"
15.2cm
37.00"
94.0cm
12.50"
31.8cm
PLAN VIEW
MODEL SCF-32
PLAN VIEW
MODEL SCF-48
ELEVATION VIEW
MODEL SCF-32
ELEVATION VIEW
MODEL SCF-48
END VIEW
ALL SCF MODELS
LID OPENING DETAIL
ALL SCF MODELS
SCF
Free-Standing Self-Contained Ice Cream Dispenser
Mechanical Data–Standard Unit
MODEL CAPACITY BTU BTU SHIP
NUMBER (3oz. ice-cream cups) HORSEPOWER AMPS LOAD CAPACITY WEIGHT
SCF-32
SCF-48
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
300 1/4 6.0 710 930 334 lbs/ 152 kg
510 1/3 8.0 1040 1300 414 lbs/ 188 kg
MSSCF 10/01
Loading...