Delfield NDF18 Specifications
Mobile Drop-Front Self-Contained Milk or Beverage Dispensers
Short Form Specifications
Exterior sides, front and back shall be 20-gauge stainless steel.
Inner liner shall be water-tight and constructed of 22-gauge stainless steel
with a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density,
foamed in place polyurethane insulation with a non-conductive top breaker
strip.
Opening shall have stainless steel lift-up and fold-down lids with black
plastic recessed handles. Door lock is standard.
Ends of the upperstructure shall have die-stamped louvers to allow proper
air flow to the condensing unit.
Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall
be controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F
(2°C to 4°C) temperature with lids closed for storage.
Refrigeration system shall be controlled by a pressure control, located
near the condensing unit.
Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall
have a 9' (2.7m) long electrical cord and NEMA 5-15P plug.
Unit shall be mounted on (4) 4.00" (10.2cm) diameter polyolefin casters
(all locking), and shall have (4) non-marking grey bumpers, one at each
corner.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
NDF
Model NDF-18
shown with optional wrap-around bumpers
Optional Accessories and Modifications
• Heavy-duty casters (contact factory)
• Wrap-around bumpers (adds 1.75" [4.4cm] to overall length and
depth)
• Laminate panels
• Fiberglass panels
NOTE: This equipment is intended for storage and /or display of pre-
• Special voltages (contact factory)
packaged or bottled products only.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
35.87"
91.1cm
33.37"
84.8cm
D=DRAIN
15.56"
39.5cm
17.00"
43.2cm
D
49.87"
126.7cm
33.37"
84.8cm
D=DRAIN
15.56"
39.5cm
D
24.00"
61.0cm
57.00"
144.8cm
5.00"
12.7cm
17.81"
45.2cm
22.00"
55.9cm
57.00"
144.8cm
5.00"
12.7cm
17.81"
45.2cm
22.00"
55.9cm
PLAN VIEW
MODEL NDF-12
PLAN VIEW
MODEL NDF-18
ELEVATION VIEW
MODEL NDF-12
ELEVATION VIEW
MODEL NDF-18
END VIEW
ALL NDF MODELS
NDF
Mobile Drop-Front Self-Contained Milk or Beverage Dispensers
Mechanical Data–Standard Unit
MODEL CRATE BTU BTU SHIP
NUMBER CAPACITY HORSEPOWER AMPS LOAD CAPACITY WEIGHT
NDF-12
NDF-18
12 1/4 5.0 690 1200 365 lbs/ 166 kg
18 1/3 7.0 900 1590 430 lbs/ 195 kg
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSNDF 10/01
Loading...