
MERIDIAN SERIES
Project __________________________
Item ____________________________
Quantity _________________________
®
CSI Section 11400
Solid Door Reach In Refrigerators
MODELS:
MRR1-S  Single section  MRR2-S  Two section  MRR3-S  Three section 
  Full height door    Full height doors    Full height doors
MRR1R-S  Remote  MRR2R-S  Remote  MRR3R-S  Remote
MRR1-SH  Single section  MRR2-SH  Two section  MRR3-SH  Three section
  Half height door    Half height doors    Half height doors
MRR1R-SH  Remote  MRR2R-SH Remote  MRR3R-SH  Remote
STANDARD FEATURES
MRR1-S
Optional left-hand hinging.
• Shroud removes without tools, for easy condenser 
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good 
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into 
kitchen traffic
• Attractive aluminum side panels are easy to clean and 
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more 
space for product storage
• Mini watt door heaters eliminate condensation with minimal 
energy cost
• Exterior digital thermometer with high/low temperature 
alarm
• Tri seal door gaskets lower energy costs with a unique 
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb. capacity.  
Flexible placement on 1” centers allows maximum storage
• Aluminum interior stands up to food acids without 
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for 
uneven floors
OPTIONS AND ACCESSORIES
 Stainless steel exterior sides 
 Stainless steel interior 
 Stainless steel kick plate 
 Door and end laminate 
 Stainless steel exterior back 
 Digital thermometer 
 TXV 
 Chrome Shelves 
 Tray Slides 
 220/50/1 electrical 
 Electronic control 
 Stainless steel legs 
 Casters
MERIDIAN SERIES
®
 SOLID DOOR REACH IN REFRIGERATORS
SPECIFICATIONS 
Exterior: Cabinet front, and shroud shall be 22-gauge 
stainless steel. Exterior sides shall be aluminum. Facing 
of shroud shall be easily removable without the use of 
tools. Cabinet interior shall be anodized aluminum. 
Bottom & top of liner shall be die-stamped to provide 
radius corners and a recessed bottom. Base shall be fully 
insulated with high-density foamed in place polyurethane.
Interior: shall have three epoxy-coated wire shelves per 
door section. Shelf support pilasters shall be heavy duty 
with shelves adjustable at 1.0” (2.5 cm) increments. Units 
are mounted on 6” (15.24cm) metal legs.
Doors: Solid doors shall have a 22-gauge stainless steel 
exterior & anodized aluminum interior liner. Doors shall 
be fully insulated with high density foamed in place 
polyurethane. Each door shall have two self-closing, 
cam-lift style hinges. Doors shall be easily removable 
without use of tools. Door gaskets shall be magnetic 
snap-in style to allow simple replacement. Door handles 
shall be recessed.
• Specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable 
shroud facing. 
Refrigeration: All components are mounted to the 
exterior cabinet ceiling, outside the food zone and are 
assembled as one piece and can be removed as one 
piece. Environmentally friendly R404A refrigerant is 
used. System has the capability of maintaining between 
27˚F and 40˚F in heavy use food service operations.  
Refrigerant is metered using a highly responsive 
thermostatic expansion valve. System is controlled using 
Delfield’s ACT-Advanced Control Technology electronic 
temperature control, which provides improved pull down 
times, reducing compressor cycling and longer compressor 
980 S. Isabella Road 
Mt. Pleasant, MI 48858 
www.delfield.com
Phone: 800-733-8948 
Fax: 800-669-0619 
Email: info@delfield.com
life with lower energy consumption. 
Control system uses adaptive defrost to assure 
evaporator coil is free of ice and operating at optimum 
efficiency. Evaporator condensate is eliminated using 
an energy efficient hot gas system.
Single Voltage Models Only: Electrical connections 
shall be 115 volt, 60 hertz, single phase, with an 
eight feet (2.4m) long electrical cord & plug as shown 
on reference chart. Cord & plug shall be wired to the 
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections 
shall be 115/208-230 volt, 60 hertz, single phase, and 
must be hard-wired to the junction box located on top 
of the unit.
Approval _________________
Date ____________________
 

Meridian Series® Solid Door Reach-In Refrigerators
34”
86.4cm
29”
73.7cm
34”
86.4cm
56”
142.2cm
34”
86.4cm
83”
210.9cm
Model #__________ 
CSI Section 11400
12.14”
30.8cm
34.0”
86.4cm
81”
200.6cm
PLAN VIEW MRR1-S
58”
147.3cm
25”
63.5cm
27.25”
69.2cm
PLAN VIEW MRR2-S
52”
132.1 cm
PLAN VIEW MRR3-S
79”
200.7cm
ELEVATION VIEW MRR3-SELEVATION VIEW MRR2-SELEVATION VIEW MRR1-S
3.80”
9.7cm
26.48”
67.2cm
6.00
15.2cm
56.76”
144.2cm
24.02” 
61cm
27.75”
70.5cm
31.75”
80.6cm
END SECTION VIEW
ALL MODELS
DOOR CLEARANCE DETAIL
ALL MODELS
PERSPECTIVE VIEW
MECHANICAL DETAIL
ALL MODELS
MECHANICAL DATA
        SHELVES  NO  UNIT BTU/HR SYSTEM  SHIP  NEMA 
MODEL  VOLTAGE  AMPS  STORAGE  SQ. FT.  SHELVES  H.P.  CAP  WEIGHT  PLUG
REFRIGERATORS 
MRR1-S  115  6.0  24.96  12.81  3  1/4  2092  376  5-15P 
MRR1-SH  115  6.0  24.96  12.81  3  1/4  2092  376  5-15P 
MRR2-S  115  10.8  51.92  27.54  6  1/3  2522  598  5-15P 
MRR2-SH  115  10.8  51.92  27.54  6  1/3  2522  598  5-15P 
MRR3-S  115  12.3  78.89  42.27  9  1/2  3637  805  5-20P 
MRR3-SH  115  12.3  78.89  42.27  9  1/2  3637  805  5-20P
Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others. 
REMOTE        SHELVES  NO  UNIT BTU/HR SYSTEM  SHIP  NEMA 
MODEL #  VOLTAGE  AMPS STORAGE  SQ. FT.  SHELVES  H.P.*  CAP  WEIGHT  PLUG
REFRIGERATORS 
MRR1R-S  115  3.0  24.96  12.81  3  1/4  —  376  — 
MRR1R-SH  115  3.2  24.96  12.81  3  1/4  —  376  — 
MRR2R-S  115  4.0  51.92  27.54  6  1/3  —  598  — 
MRR2R-SH  115  4.2  51.92  27.54  6  1/3  —  598  — 
MRR3R-S  115  4.9  78.89  42.27  9  1/2  —  805  — 
MRR3R-SH  115  5.7  78.89  42.27  9  1/2  —  805  —
*Recommended
980 S. Isabella Road 
Mt. Pleasant, MI 48858 
www.delfield.com
Phone: 800-733-8948 
Fax: 800-669-0619 
Email: info@delfield.com
Printed in the USA.  
03/07 
DSMR_R